Products

The 7548 Linear Amplifier is a high-output, low-noise solution engineered for precision and reliability in demanding environments.

Key Features:

• Up to 100 Ap / 195 Vp output
• Delivers 12,000W peak power for 40 ms
• Supports continuous 5,500W output into 1Ω load
• Operates from DC to 100 kHz bandwidth
• Field-selectable current or voltage mode
• Ideal for MIL-STD-704F three-phase testing
• Stackable for 800 Vp or 170 Ap system output
• Built-in protection against over-voltage, over-temp, and overload
• Intuitive LCD display and status indicators

7796HC Linear Power Amplifier – High Current DC & AC Precision

Key Features:

• Output up to 85A continuous, 200A in-rush current
• Frequency response: DC to 100+ kHz
• Four-quadrant operation: source and sink
• Field-selectable voltage or current modes
• Stable with resistive, inductive, and capacitive loads
• Multiple protections: Over/under voltage, current, and temperature
• Supports DC ripple, surge, dropout, and ground noise simulations
• Ideal for high-current DC Conducted Immunity testing
• LCD with real-time voltage and current metrics
• Supports both balanced and unbalanced inputs

Aetec 7794 High Current Industrial Amplifier

Key Features:

• Up to 200 Ap / 100 Vp; DC to 150 kHz bandwidth
• Stable with resistive, inductive, or capacitive loads
• Controlled-voltage or controlled-current operation
• Switchable rail supply for optimized load impedance
• 60A continuous output at 13.8V DC
• ±95V DC and >35 V/µs slew rate
• Four-quadrant operation: sourcing and sinking
• Extensive protection against overvoltage, overcurrent, overtemperature
• Rack-mountable chassis with LCD fault diagnostics

AETechron 7796 Amplifier – High-Current, Low-Impedance Industrial Power
Ideal for precision testing, EMC simulations, and MRI systems.

Key Features:

• Delivers over 200 Ap peak current, up to ±180V
• DC to 100 kHz bandwidth for versatile signal reproduction
• Four-quadrant operation (source/sink modes)
• Operates in both voltage and current-controlled modes
• Handles in-rush currents up to 200A
• Field-configurable rail supply modes for load optimization
• Advanced protection against voltage, current, and thermal faults
• Stackable for higher voltage or current (up to 800 Ap)

Teledyne Test Tools Digital Power Meters provide reliable, high-precision AC and DC power measurements in a compact design. Ideal for R&D, QA, and compliance testing.

Key Features:

• Bandwidth: DC, 0.1 Hz to 100 kHz
• High-resolution 4″ and 5″ TFT LCD displays
• 19 power measurement parameters
• 16-bit ADC and 300 kHz sampling rate (T3PM1100)
• Waveform, harmonic, and integration functions
• External current sensor input (T3PM1100)
• Supports IEC 62301 and IEC 61000-4-7 standards
• Interfaces: USB, LAN, RS-232C
• Front/rear terminal inputs for flexible testing

Applications:

• Aerospace & Defense – Avionics, MIL-STD-704, EMC compliance, 400Hz & wild frequency testing
• EV Charging & V2G/V2H Testing – On-board chargers, grid-tied inverters, smart grid simulation
• Energy Storage & Renewable Systems – Home ESS, solar PV/grid-tied inverter testing
• Industrial Power Simulation – Frequency conversion, harmonic analysis, transient simulations
• Smart Grid & Compliance Testing – IEC 61000, RTCA DO-160, IEEE 1547, and more

Applications

• Aerospace & Avionics – Frequency conversion (400Hz & wild frequency testing), MIL-STD compliance
• EV Charging & Power Electronics – On-board chargers (OBC), V2G/V2H testing, battery simulation
• Renewable Energy Systems – Solar PV/grid-tied inverter testing, home ESS & smart grid simulations
• Power Supply & Industrial Testing – AC/DC power supply evaluation, network server & data center testing
• Research & Development Labs – High-frequency power testing, compliance verification, transient simulations

Applications

• Aerospace & Avionics Testing – 400Hz & wild frequency (360Hz-800Hz) compliance
• EV Charging & Power Electronics – AC/DC conversion, V2G, V2H, and OBC testing
• Renewable Energy & Smart Grid – Solar PV inverters, energy storage & grid simulation
• Industrial Power & Manufacturing – AC power supply testing, production line QA
• R&D & Compliance Labs – IEC61000, MIL-STD-704, RTCA DO-160 testing
• Railway Power Systems – 16.6Hz & 400Hz frequency compliance

High-Power 4-Quadrant AC & DC Power Source with Load Option

• Powerful & Versatile: 12kVA / kW to 21kVA / kW in a 4U chassis. Parallel units up to 168kVA/kW (single cabinet)or 252kVA/kW (dual cabinet).
• Multi-Phase Flexibility: Supports single-phase, split-phase, and three-phase configurations with AC, DC, or AC+DC output.
• Grid Simulation & Compliance Testing: Emulates real-world power grid conditions, simulating disturbances, harmonics, and interharmonics for accurate renewable energy testing (solar inverters, EV charging, microgrid, and UPS applications).
• Regenerative Efficiency: Over 90% energy recovery back to the grid reduces power consumption and operational costs.
• Advanced Control & Monitoring: SmartSource Suite enables remote control via an intuitive web browser interface with LAN, USB, GPIB, and RS232 connectivity.

4-Quadrant Programmable Load with Energy Recovery

• Powerful & Scalable: 6kVA/kW to 21kVA/kW in a compact 4U chassis. Parallel units up to 168kVA/kW per cabinet or 252kVA/kW in dual cabinets.
• Versatile Load Simulation: AC and DC load capability with single-phase, split-phase, and three-phase configurations.
• Grid-Ready Compliance Testing: Supports IEEE 1547, UL 1741, IEC 61000-3, IEC 61000-4 compliance testing.
• Energy-Efficient Regeneration: Returns over 90% of absorbed power back to the grid, reducing operational costs.
• Dynamic Load Emulation: Simulates linear and non-linear loads, harmonics, transient conditions, and waveform distortions.
• High-Speed Smart Control: SmartSource Suite for real-time test automation and remote monitoring.

High-Power AC/DC Load Simulator with PHIL Interface

• Scalable Power Density: Available in 30kVA/kW, 45kVA/kW, and 55kVA/kW models, with parallel cabinets up to 550kVA/kW.
• Versatile AC/DC Load Capability: Supports single-phase, split-phase, three-phase, and multi-channel configurations.
• Dual Constant Power Voltage Ranges:
  • AC Voltage: 5-220V L-N / 9-380V L-L & 5-440V L-N / 9-760V L-L
  • DC Voltage: 0-335Vdc & 9-650Vdc
• Advanced PHIL Interface (Option H): High-speed analog I/O for real-time frequency, voltage, and current control.
• Regenerative Power Efficiency: Returns over 90% of absorbed energy back to the grid, reducing operational costs & heat dissipation.
• Dynamic Load Simulation: Simulates harmonics, transient conditions, and waveform distortions for real-world power testing.
• SmartSource Suite for Remote Control: Web-based monitoring and test automation via LAN, USB, GPIB, and RS232.

Single Phase Power Meter Compatible with DC Measurement and Current/Power Integration Measurement

Key Features:

• Compatible with the SPECpower® (*1) benchmarking for server power consumption
• DC measurement mode, AC, and AC+DC measurement
• Integration function for current and power
• ±0.1% high basic accuracy (*2) For complete details, please refer to the specifications)
• Extended period of guaranteed accuracy of 3 years
• Complete accuracy over a wide input range

Single-phase, 2U, industrial amplifier/battery simulator

• Bench-sized
• Powered from 120V/230VAC
• Source and Sink (4 quadrant)
• Rugged Design
• 3-Year, No-Fault Warranty

Key Performance Capabilities:

• Drop outs and surges as fast as 1.2µs
• Small signal response up to 1 MHz
• 13.5 VDC at up to 28A
• Field-selectable ±40V, 75V or 150V potential

The EME Guard Plus is a lightweight and robust personal protection monitor designed to ensure the safety of workers operating near electromagnetic field (EMF) emitters such as antennas, radars, and base stations. With a frequency range of 1 MHz to 40 GHz, this device continuously monitors and records EMF exposure levels while providing immediate audio, visual, and vibrating alerts when exposure exceeds predefined safety thresholds. Customizable alarm settings and a triaxial isotropic probe ensure accurate and reliable measurements.

The EME Guard XS Radar is a state-of-the-art RF safety monitor, specifically designed for workers operating near radar transmitters and antennas. With its isotropic tri-axis E-field sensors, this compact device provides continuous EMF monitoring over a frequency range of 1 MHz to 40 GHz, including short pulsed signal detection. Equipped with audio and visual alarms, it alerts users instantly when EMF exposure exceeds predefined safety thresholds, creating a safer working environment for military, aviation, and telecom personnel.

Solutions For:

•  Accurate measurement with tri-axis sensors
• Instant audio and visual alarm
• Robust, reliable and user-friendly
• Covers 5G / 6G bands, measuring up to 71 GHz

User profile:

• Persons working near antennas including installation and maintenance workers, broadcast, PMR and mobile phone operators or regulatory body employees

Measurement capabilities:

• Continuous monitoring of Electromagnetic Field levels with isotropic tri-axis E-field sensors
• EMF Level indicated by a LED color scale
• Audio and visual alarms triggered when EMF exceeds the reference level