Products

The 7548 Linear Amplifier is a high-output, low-noise solution engineered for precision and reliability in demanding environments.

Key Features:

• Up to 100 Ap / 195 Vp output
• Delivers 12,000W peak power for 40 ms
• Supports continuous 5,500W output into 1Ω load
• Operates from DC to 100 kHz bandwidth
• Field-selectable current or voltage mode
• Ideal for MIL-STD-704F three-phase testing
• Stackable for 800 Vp or 170 Ap system output
• Built-in protection against over-voltage, over-temp, and overload
• Intuitive LCD display and status indicators

7796HC Linear Power Amplifier – High Current DC & AC Precision

Key Features:

• Output up to 85A continuous, 200A in-rush current
• Frequency response: DC to 100+ kHz
• Four-quadrant operation: source and sink
• Field-selectable voltage or current modes
• Stable with resistive, inductive, and capacitive loads
• Multiple protections: Over/under voltage, current, and temperature
• Supports DC ripple, surge, dropout, and ground noise simulations
• Ideal for high-current DC Conducted Immunity testing
• LCD with real-time voltage and current metrics
• Supports both balanced and unbalanced inputs

Aetec 7794 High Current Industrial Amplifier

Key Features:

• Up to 200 Ap / 100 Vp; DC to 150 kHz bandwidth
• Stable with resistive, inductive, or capacitive loads
• Controlled-voltage or controlled-current operation
• Switchable rail supply for optimized load impedance
• 60A continuous output at 13.8V DC
• ±95V DC and >35 V/µs slew rate
• Four-quadrant operation: sourcing and sinking
• Extensive protection against overvoltage, overcurrent, overtemperature
• Rack-mountable chassis with LCD fault diagnostics

AETechron 7796 Amplifier – High-Current, Low-Impedance Industrial Power
Ideal for precision testing, EMC simulations, and MRI systems.

Key Features:

• Delivers over 200 Ap peak current, up to ±180V
• DC to 100 kHz bandwidth for versatile signal reproduction
• Four-quadrant operation (source/sink modes)
• Operates in both voltage and current-controlled modes
• Handles in-rush currents up to 200A
• Field-configurable rail supply modes for load optimization
• Advanced protection against voltage, current, and thermal faults
• Stackable for higher voltage or current (up to 800 Ap)

Experience precision RF signal analysis on the go with this lightweight, handheld analyzer designed for both lab and field use.

Key Features:

• Frequency range: 1MHz to 1.3GHz (PSA1303) or 2.7GHz (PSA2703)
• RBW: 300Hz to 10MHz
• -115dBm typical noise floor
• Dual markers with absolute/difference values
• AM/FM demodulation in zero span
• Auto-find & smart marker peak tracking
• USB for waveform saving and PC connection
• Live, View, and Reference trace modes
• 6-hour lithium-ion battery operation
• Weighs just 0.58 kg
• Optional U01 Upgrade: Limit lines, data logging, triggering, compensation tables

High-performance, battery-powered spectrum analyzers ideal for RF engineers and field use.

Key Features:

• Frequency range: 10MHz to 3.6GHz or 6.0GHz
• -120dBm typical noise floor
• Resolution bandwidths from 300Hz to 10MHz
• AM/FM audio demodulation with zero span
• Live, View & Reference traces with markers
• Smart marker tracking with peak detection
• USB data logging & real-time PC view
• Compact, lightweight (0.56 kg) with >3hr battery
• Optional U02 features: limit lines, OBW, ACPR, AM/FM waveform demodulation

The Teledyne T3SA Series Spectrum Analyzers deliver high-performance signal analysis from 9 kHz to 3.2 GHz in a compact, easy-to-use design. Ideal for R&D, education, production, and pre-compliance testing, it features a large touchscreen and advanced digital IF technology.

Key Features:

• All Digital IF technology10.1”
• WVGA (1024 x 600) touchscreen display
• Frequency range from 9 kHz to 3.2 GHz
• -161 dBm/Hz displayed average noise level (typical)
• -98 dBc/Hz @ 10 kHz offset phase noise (typical)
• Total amplitude accuracy < 0.7 dB
• 1 Hz minimum resolution bandwidth (RBW)
• Built-in preamplifier for improved sensitivity

Typical Applications

● Research Laboratory
● Development Laboratory
● Repair and Maintenance
● Calibration Laboratory
● Automatic Production Test
● General bench-top use

High-Precision Current Measurement with BNC Connectivity

• Precision Current Sensing: ±1% accuracy ensures reliable real-time current monitoring.
• BNC Connector for Seamless Connectivity: Works with oscilloscopes, ADCs, spectrum analyzers, and power analyzers.
• Clamp-On Design for Non-Intrusive Measurement: Safely monitor live current flow without circuit disruption.
• 50 Ohm Termination Compatible: Output reduces by half when using a 50Ω termination.
• High-Voltage Safety Considerations: Conductive case requires adequate insulation for user safety.

Single-phase, 2U, industrial amplifier/battery simulator

• Bench-sized
• Powered from 120V/230VAC
• Source and Sink (4 quadrant)
• Rugged Design
• 3-Year, No-Fault Warranty

Key Performance Capabilities:

• Drop outs and surges as fast as 1.2µs
• Small signal response up to 1 MHz
• 13.5 VDC at up to 28A
• Field-selectable ±40V, 75V or 150V potential

HDO4000A oscilloscopes have 4 analog input channels, 12-bit resolution using Teledyne LeCroy’s HD4096 high-definition technology, up to 1 GHz of bandwidth and a compact form factor with a large 12.1” multi-touch display. They are ideal for debug and troubleshooting of power electronics designs, digital power management or power integrity analysis, automotive electronics systems, and deeply embedded or mechatronic designs.

The WaveSurfer 3000z has a 10.1″ capacitive touch display, the longest memory, and the deepest toolbox – all at an affordable price.

• HD4096 technology provides 12-bit resolution all the time
• 2ProBus input supports over 30 probes in 9 product categories
• 3Long record capture of up to 25 Mpts
• 412.1” 1280 x 800 HD capacitive touchscreen
• 5Mixed-signal capability – debug complex embedded designs with integrated 16-channel mixed signal option
• 6Easy connectivity with 2 USB 3.1 ports
• 7MAUI with OneTouch user interface for intuitive and efficient operation

• 15.6″ 1920 x 1080 capacitive touchscreen display
• 24 analog input channels
• 3ProBus input supports every Teledyne LeCroy probe
• 4MAUI with OneTouch user interface for intuitive and efficient operation
• 5Q-Scape multi-tab display architecture
• 6Up to 250 Mpts of acquisition memory
• 7HD4096 technology – 12 bits all the time
• 8Buttons/indicators color-coded to associated waveform on display
• 9Use cursors and adjust settings without opening a menu
• 10Mixed Signal capability with 16 integrated digital channels
• 116 USB 3.1 ports (2 front, 4 side)

• HD4096 technology provides 12-bit resolution up to 8 GHz and 20 GS/s
• Up to 5 Gpts of acquisition memory enables detailed viewing of long events
• 15.6” 1900 x 1080 Full HD capacitive touchscreen
• ProBus2 input supports up to 8 GHz bandwidth while maintaining support for legacy ProBus probes
• MAUI with OneTouch user interface for intuitive and efficient operation
• Waveform Control Knobs – Control channel, zoom, math and memory traces with the multiplexed vertical and horizontal knobs
• Color-coded panel indicators – Trigger, horizontal and vertical indicator colors correspond to the associated waveform on the display
• Cursor/Adjust Knobs – Enable and position cursors or adjust settings and parameters without opening a menu
• Mixed Signal Capability – Debug complex embedded designs with integrated 16-channel mixed signal capability
• Easy connectivity with seven USB 3.1 ports (3 front, 4 side) and UHD (4k) HDMI and DisplayPort outputs

• Eye diagram (a), eye mask failure (b) and IsoBER eye opening analysis (c)
• Jitter spectrum (a) with noise floor display (b) and inverse FFT of the periodic jitter (c)
• Data dependent jitter (DDj) plot for each bit in synch with pattern (a) and with histogram (b)
• Time interval error (TIE) jitter track analysis
• Jitter histograms (a) with bathtub curves (b) and CDF plot (c)
• Intersymbol interference (ISI) plots pinpoint bit sequences that have high ISI and are sources of bit errors
• Jitter measurements table with full details for one or more “lanes” plus reference

• 15.6” 1920 x 1080 capacitive touchscreen display
• 8 analog input channels
• ProBus input supports every Teledyne LeCroy probe
• MAUI with OneTouch user interface for intuitive and efficient operation
• Q-Scape multi-tab display architecture
• Up to 5 Gpts of acquisition memory
• HD4096 technology – 12 bits all the time
• Buttons/indicators color-coded to associated waveform on display
• Use cursors and adjust settings without opening a menu
• Mixed Signal capability with 16 integrated digital channels
• 6 USB 3.1 ports (2 front, 4 side)
• HDMI and DisplayPort – supports 4K (4096 x 2304) external monitor
• Removable SSD (standard)
• View 16 channels on one display with OscilloSYNC
• Reference Clock Input/Output for connecting to other equipment
• USBTMC over USB 3.1 for fast data offload