Products

The 7548 Linear Amplifier is a high-output, low-noise solution engineered for precision and reliability in demanding environments.

Key Features:

• Up to 100 Ap / 195 Vp output
• Delivers 12,000W peak power for 40 ms
• Supports continuous 5,500W output into 1Ω load
• Operates from DC to 100 kHz bandwidth
• Field-selectable current or voltage mode
• Ideal for MIL-STD-704F three-phase testing
• Stackable for 800 Vp or 170 Ap system output
• Built-in protection against over-voltage, over-temp, and overload
• Intuitive LCD display and status indicators

7796HC Linear Power Amplifier – High Current DC & AC Precision

Key Features:

• Output up to 85A continuous, 200A in-rush current
• Frequency response: DC to 100+ kHz
• Four-quadrant operation: source and sink
• Field-selectable voltage or current modes
• Stable with resistive, inductive, and capacitive loads
• Multiple protections: Over/under voltage, current, and temperature
• Supports DC ripple, surge, dropout, and ground noise simulations
• Ideal for high-current DC Conducted Immunity testing
• LCD with real-time voltage and current metrics
• Supports both balanced and unbalanced inputs

Aetec 7794 High Current Industrial Amplifier

Key Features:

• Up to 200 Ap / 100 Vp; DC to 150 kHz bandwidth
• Stable with resistive, inductive, or capacitive loads
• Controlled-voltage or controlled-current operation
• Switchable rail supply for optimized load impedance
• 60A continuous output at 13.8V DC
• ±95V DC and >35 V/µs slew rate
• Four-quadrant operation: sourcing and sinking
• Extensive protection against overvoltage, overcurrent, overtemperature
• Rack-mountable chassis with LCD fault diagnostics

AETechron 7796 Amplifier – High-Current, Low-Impedance Industrial Power
Ideal for precision testing, EMC simulations, and MRI systems.

Key Features:

• Delivers over 200 Ap peak current, up to ±180V
• DC to 100 kHz bandwidth for versatile signal reproduction
• Four-quadrant operation (source/sink modes)
• Operates in both voltage and current-controlled modes
• Handles in-rush currents up to 200A
• Field-configurable rail supply modes for load optimization
• Advanced protection against voltage, current, and thermal faults
• Stackable for higher voltage or current (up to 800 Ap)

Experience precision RF signal analysis on the go with this lightweight, handheld analyzer designed for both lab and field use.

Key Features:

• Frequency range: 1MHz to 1.3GHz (PSA1303) or 2.7GHz (PSA2703)
• RBW: 300Hz to 10MHz
• -115dBm typical noise floor
• Dual markers with absolute/difference values
• AM/FM demodulation in zero span
• Auto-find & smart marker peak tracking
• USB for waveform saving and PC connection
• Live, View, and Reference trace modes
• 6-hour lithium-ion battery operation
• Weighs just 0.58 kg
• Optional U01 Upgrade: Limit lines, data logging, triggering, compensation tables

High-performance, battery-powered spectrum analyzers ideal for RF engineers and field use.

Key Features:

• Frequency range: 10MHz to 3.6GHz or 6.0GHz
• -120dBm typical noise floor
• Resolution bandwidths from 300Hz to 10MHz
• AM/FM audio demodulation with zero span
• Live, View & Reference traces with markers
• Smart marker tracking with peak detection
• USB data logging & real-time PC view
• Compact, lightweight (0.56 kg) with >3hr battery
• Optional U02 features: limit lines, OBW, ACPR, AM/FM waveform demodulation

The Teledyne T3SA Series Spectrum Analyzers deliver high-performance signal analysis from 9 kHz to 3.2 GHz in a compact, easy-to-use design. Ideal for R&D, education, production, and pre-compliance testing, it features a large touchscreen and advanced digital IF technology.

Key Features:

• All Digital IF technology10.1”
• WVGA (1024 x 600) touchscreen display
• Frequency range from 9 kHz to 3.2 GHz
• -161 dBm/Hz displayed average noise level (typical)
• -98 dBc/Hz @ 10 kHz offset phase noise (typical)
• Total amplitude accuracy < 0.7 dB
• 1 Hz minimum resolution bandwidth (RBW)
• Built-in preamplifier for improved sensitivity

Typical Applications

● Research Laboratory
● Development Laboratory
● Repair and Maintenance
● Calibration Laboratory
● Automatic Production Test
● General bench-top use

• Superior Noise Reduction – Attenuates up to 24 dBA, making it perfect for quiet office environments.
• Efficient Cooling – Six ultra-quiet fans expel up to 3 kW of thermal heat.
• Flexible Installation – Available in 24U, 35U, and 44U heights with 36” and 42” depths.
• Durable Construction – Made from 12-gauge US-finished steel with a maximum load capacity of 2,000 lbs.
• Comprehensive Security – Key lockable front and rear doors, with optional locking side panels.
• Acoustic Lined Panels – Fully lined with sound-absorbing material for maximum noise control.
• Versatile Color Options – Available in 7 standard colors including Black, Pearl White, Granite, Platinum, White, Dark Grey, and Blue.
• Complete Accessibility – Removable side panels for easy installation and maintenance.
• Integrated Temperature Display – Real-time temperature monitoring with remote sensor support.
• Cable Management – Bottom rear cable entry accommodates up to 500 CAT 5 cables.

Ideal for:

• Small & Medium Businesses – Deploy IT infrastructure without dedicated server rooms.
• Edge Computing – Reduce latency and bandwidth strain with localized computing.
• Secure Data Centers – Enhance equipment security & environmental control.

With its compact footprint, advanced cooling, and soundproofing technology, the EDGE 3 enclosure offers a quiet, efficient, and scalable alternative to traditional server rooms.

Customizable Configurations for Any Environment

• Freestanding cabinets with adjustable 19” EIA square hole rails and depths of up to 38”.
• Wall-mounted units (cold-rolled steel or stainless steel) available in 12U and 19U sizes.
• Outdoor-ready enclosures for harsh industrial conditions.

Ideal for:

• Telecom & Network Infrastructure
• Industrial Automation & Edge Computing
• Smart Grid & IoT Deployments
• Military & Government Facilities

The KARIS SRK Precision Cooling Cabinets are a space-saving, cost-effective solution for securely housing IT and industrial equipment while maintaining optimal environmental conditions.

• Fully assembled design for hassle-free installation.
• Hinged swing-out option for rear access to cables and equipment.
• Adjustable rails and multiple cable management points.
• Lockable side panels and glass doors for added security.
• Compatibility with power, cooling, and shelving accessories.
• Removable back panel for simplified mounting.
• Durable black powder-coated finish with EIA 310-D compliance.

The KARIS SRK Series Wall-Mount Cabinets provide an ideal solution for IT professionals and data centre managers looking for efficient, secure, and accessible equipment housing.

• Noise reduction of up to 31 dBA, making servers whisper-quiet.
• Up to 12 kW heat dissipation, ensuring optimal thermal management.
• IoT-enabled U-Telligent Management System (UMS) for remote monitoring, security, and alerts.
• Built-in security with internal camera mounting, electronic locking, and real-time access alerts.
• Available in 12U, 24U, and 42U heights, supporting all major server brands.
• Flexible installation options, allow for easy integration in offices, labs, and industrial settings.
• Energy-efficient EC fans, dynamically adjust speed based on heat load to reduce energy costs.
• Fully enclosed design with soundproof cable entry points, maintaining maximum acoustic performance.

Single-phase, 2U, industrial amplifier/battery simulator

• Bench-sized
• Powered from 120V/230VAC
• Source and Sink (4 quadrant)
• Rugged Design
• 3-Year, No-Fault Warranty

Key Performance Capabilities:

• Drop outs and surges as fast as 1.2µs
• Small signal response up to 1 MHz
• 13.5 VDC at up to 28A
• Field-selectable ±40V, 75V or 150V potential

The EME Guard Plus is a lightweight and robust personal protection monitor designed to ensure the safety of workers operating near electromagnetic field (EMF) emitters such as antennas, radars, and base stations. With a frequency range of 1 MHz to 40 GHz, this device continuously monitors and records EMF exposure levels while providing immediate audio, visual, and vibrating alerts when exposure exceeds predefined safety thresholds. Customizable alarm settings and a triaxial isotropic probe ensure accurate and reliable measurements.

The EME Guard XS Radar is a state-of-the-art RF safety monitor, specifically designed for workers operating near radar transmitters and antennas. With its isotropic tri-axis E-field sensors, this compact device provides continuous EMF monitoring over a frequency range of 1 MHz to 40 GHz, including short pulsed signal detection. Equipped with audio and visual alarms, it alerts users instantly when EMF exposure exceeds predefined safety thresholds, creating a safer working environment for military, aviation, and telecom personnel.

Solutions For:

•  Accurate measurement with tri-axis sensors
• Instant audio and visual alarm
• Robust, reliable and user-friendly
• Covers 5G / 6G bands, measuring up to 71 GHz

User profile:

• Persons working near antennas including installation and maintenance workers, broadcast, PMR and mobile phone operators or regulatory body employees

Measurement capabilities:

• Continuous monitoring of Electromagnetic Field levels with isotropic tri-axis E-field sensors
• EMF Level indicated by a LED color scale
• Audio and visual alarms triggered when EMF exceeds the reference level