Products

Hioki CM3289 Clamp Meter is a True RMS AC clamp meter designed for precise current measurement, even in tight or challenging environments.

Key Features:

• Measures AC current up to 1000 A with True RMS accuracy
• Wide operating range from -25°C to 65°C for harsh conditions
• Slim and compact clamp design for confined spaces
• Optional flexible sensor CT6280 for measuring up to 4199 A
• Measures voltage, resistance, and continuity in one device
• Drop-resistant and engineered for rugged environments
• Long battery life with auto power-save function

Hioki CM4371-50 Clamp Meter delivers high-precision AC/DC measurements with advanced safety and wireless data features, ideal for demanding electrical work.

Key Features:

• True RMS measurement up to 600 A AC/DC
• CAT IV 600 V, CAT III 1000 V safety ratings
• Measures DC voltages up to 2000 V with optional probe
• Wireless data transfer via GENNECT Cross app and Z3210 adapter
• Harmonic analysis up to the 30th order for system diagnostics
• Simultaneous RMS and crest inrush current measurement
• Automatic AC/DC detection for efficient testing
• Compact, rugged design for field reliability

Hioki CM4373-90 True RMS 2000A AC/DC Clamp Meter delivers precision and reliability for professionals working in demanding environments. Built for durability and accuracy, it includes a wireless adapter for real-time data transfer and enhanced field productivity.

Key Features:

• Measures up to 2000 A AC/DC with True RMS accuracy
• CAT IV 600 V, CAT III 1000 V safety rating
• Wireless connectivity via Z3210 adapter for instant data transfer
• Supports harmonic analysis (1st–30th order) using GENNECT Cross app
• Measures up to 2000 V DC with optional P2010 probe
• Automatic AC/DC detection for improved workflow efficiency
• IP54-rated enclosure for dust and water resistance
• Ideal for solar PV inspections, EV systems, and industrial maintenance

Hioki CM4375-90 True RMS 1000A AC/DC Clamp Meter delivers precision and reliability with a slim jaw design that fits easily into tight spaces. Built for modern electrical work, it features a wireless adapter for effortless data transfer and is ideal for solar, EV, and industrial applications.

Key Features:

• Measures up to 1000A AC/DC with True RMS accuracy
• Slim jaw design fits easily in tight panels and wiring setups
• Wireless communication via Z3210 adapter for fast data transfer
• Measures up to 2000V DC with optional P2010 probe
• CAT IV 600V / CAT III 1000V safety rating
• IP54 dustproof and waterproof design for durability
• Harmonic analysis (1st–30th order) using GENNECT Cross app
• Auto AC/DC detection and inrush current measurement for motors and equipment
• Guaranteed for 30,000 open-close jaw cycles

Key Features:

• PXI/cPCI JTAG controller for seamless integration into PXI-based test systems
• Supports up to 4 JTAG chains on a Unit Under Test (UUT)
• Configurable I/O pin-out for maximum flexibility across projects
• Fully compatible with other XJLink2 controllers
• TCK clock speeds up to 166 MHz
• Programmable voltage domains from 1.1 V to 3.3 V in 0.1 V steps
• Built-in voltage meter and frequency counter on all I/O pins
• Adjustable signal termination with auto-skew control
• Includes LabVIEW™ Virtual Instruments (VIs) for easy integration
• Self-contained licence for use on multiple PXI racks or servers

Key Features:

• Portable USB-C to JTAG controller with 40 I/O pins
• Supports up to 8 separate JTAG TAP chains with independent frequencies
• Compact and rugged aluminium casing for lab, production, or field use
• Configurable JTAG pin-out to suit any Unit Under Test (UUT)
• Electrical protection against –30 V to +30 V input
• Four programmable I/O voltages (1.2 V to 3.3 V, in 0.1 V steps)
• Built-in voltmeter and frequency counter on all pins
• High-speed operation with TCK up to 166 MHz
• USB bus-powered with locking Type-C connector
• Self-contained licence for maximum flexibility

Key Features:

• Compact USB JTAG controller for flexible board testing
• Supports up to 4 JTAG chains per UUT
• Lightweight, portable, and ideal for lab, production, or field use
• Configurable pin-out for easy adaptation to any PCB design
• High-speed TCK clock up to 166 MHz
• Two programmable voltages from 1.1 V to 3.3 V in 0.1 V steps
• Built-in voltmeter and frequency counter on all I/O pins
• +5 V tolerant signals with auto-skew control
• USB bus-powered, no external PSU needed
• Self-contained licence, usable on multiple PCs

Key Features

• Approved by Keysight Technologies for i3070 ICT integration
• Fully compatible with all XJTAG projects
• High-speed programming with TCK up to 166 MHz
• Supports up to 4 JTAG chain connections to UUT
• Configurable interface voltages (1.1 V to 3.3 V)
• Adjustable signal slew rate and drive strength
• Automatic signal skew control for maximum reliability
• Frequency counter on all I/O pins (up to 200 MHz input)
• Fits into one i3070 utility card slot (multiple units supported)
• Enables test + programming in a single stage to boost throughput
• Supports additional protocols including I²C, SPI, and vendor-specific interfaces
• Flexible software licensing options for stand-alone or network operation

Key Features:

• 4-port JTAG tester for simultaneous testing of up to 4 boards
• High-speed USB 2.0 interface with robust performance
• Supports up to 4 TAP chains per UUT
• Configurable JTAG pin-out for simplified connectivity
• Parallel or independent testing on each port
• Programmable voltages from 1.1 V to 3.3 V in 0.1 V steps
• Built-in voltmeter and frequency counter on all I/O pins
• Automatic signal skew control for reliable operation
• Self-contained licence for use across multiple PCs
• Ideal for production lines and PCB manufacturers

The EME Guard Plus is a lightweight and robust personal protection monitor designed to ensure the safety of workers operating near electromagnetic field (EMF) emitters such as antennas, radars, and base stations. With a frequency range of 1 MHz to 40 GHz, this device continuously monitors and records EMF exposure levels while providing immediate audio, visual, and vibrating alerts when exposure exceeds predefined safety thresholds. Customizable alarm settings and a triaxial isotropic probe ensure accurate and reliable measurements.

The EME Guard XS Radar is a state-of-the-art RF safety monitor, specifically designed for workers operating near radar transmitters and antennas. With its isotropic tri-axis E-field sensors, this compact device provides continuous EMF monitoring over a frequency range of 1 MHz to 40 GHz, including short pulsed signal detection. Equipped with audio and visual alarms, it alerts users instantly when EMF exposure exceeds predefined safety thresholds, creating a safer working environment for military, aviation, and telecom personnel.

Solutions For:

•  Accurate measurement with tri-axis sensors
• Instant audio and visual alarm
• Robust, reliable and user-friendly
• Covers 5G / 6G bands, measuring up to 71 GHz

User profile:

• Persons working near antennas including installation and maintenance workers, broadcast, PMR and mobile phone operators or regulatory body employees

Measurement capabilities:

• Continuous monitoring of Electromagnetic Field levels with isotropic tri-axis E-field sensors
• EMF Level indicated by a LED color scale
• Audio and visual alarms triggered when EMF exceeds the reference level

Key Features:

• Measure even harmonic waveform components using the True RMS method
  
• Expanded -25°C to 65°C operating temperature range
  
• Connect the CT6280 flexible sensor to measure up to 4199 A in thick or paired wires
  
• Drop proof design withstands drop from a height of 1 meter

• CAT IV 600 V, CAT III 1000 V
  When using P2000: CAT III 2000 V, CAT IV 1000 V
  
• Easily get into tight spaces between cables thanks to thin sensor with a minimum cross-section span of 11 mm
  
• Measure up to 2000 A AC
  
• AC A, AC and DC V, DC+AC V, resistance, frequency, and more
• Easily transfer measurement data to your smartphone or tablet by using our free app GENNECT Cross or to an Excel® file (*1)
• Harmonic analysis from 1st to 30th order with GENNECT Cross (*1)

• Measure the fundamental waveform component using the average rectified method
• Expanded -25 °C to 65 °C operating temperature range
• Connect the CT6280 flexible sensor to measure up to 4199 A in thick or paired wires
• Drop proof design withstands drop from a height of 1 meter