PRODUCTS
TMetrix carries the following test and measurement products:
SERVICES
Explore our range of technical support and calibration services:
1 800 665 7301 | info@tmetrix.com

About Us | Events | Support | Resource Centre | Line Card | News | Blog | Careers | Contact Us

Products

  • CHEMICAL IMPEDANCE ANALYZER IM3590
    CHEMICAL IMPEDANCE ANALYZER IM3590 - 2
    Quick View
    HIOKI E E CORPORATION CHEMICAL IMPEDANCE ANALYZER IM3590 USD $ 10,866.40

    A high-performance analyzer designed for R&D applications involving electrochemical components, materials, batteries, and EDLCs. It enables precise impedance measurements essential for advanced evaluation and development.

    Key Features:

    • Wide frequency range: 1 mHz to 200 kHz for detailed ion and solution behavior analysis
    • Dual function: High-speed continuous LCR and sweep measurements with one device
    • Battery analysis: Measures internal impedance under no-load conditions
    • Ultra-fast sweep: Perform measurements in as little as 2 ms
    • High accuracy: ±0.05% basic precision for reliable R&D and testing
    • Advanced analysis: Supports Cole-Cole plots and equivalent-circuit modeling for electrochemical studies
    Add to cart
    Learn More
  • EQUIVALENT CIRCUIT ANALYSIS FIRMWARE IM9000
    EQUIVALENT CIRCUIT ANALYSIS FIRMWARE IM9000
    Quick View
    HIOKI E E CORPORATION EQUIVALENT CIRCUIT ANALYSIS FIRMWARE IM9000 USD $ 1,831.09

    An advanced firmware upgrade for the IM3570 that enables quick and accurate equivalent circuit analysis, ideal for in-depth component evaluation and quality control.

    Key Features:

    • Automatically selects the optimal equivalent circuit model from five typical options
    • Minimizes discrepancies between measured and ideal frequency characteristics
    • Determines acceptance/rejection of L, C, and R elements with precision
    • Evaluates resonance sharpness (mechanical quality coefficient)
    • Enables detailed analysis of piezoelectric elements and inductors through resonance
    Add to cart
    Learn More
  • Hioki Battery Impedance Meter - 1
    Hioki Battery Impedance Meter - 2
    Quick View
    HIOKI E E CORPORATION Hioki BT4560 Battery Impedance Meter USD $ 7,598.84

    Key Features:

    • High-precision EIS measurement for EV and ESS battery testing
    • Frequency range: 0.01 Hz to 1.05 kHz for versatile impedance analysis
    • Measures impedance, voltage, and temperature simultaneously
    • Supports Nyquist (Cole-Cole) plotting for battery R&D
    • Four-terminal pair probes reduce magnetic flux for stable measurements
    • LAN interface enables multi-channel testing and integration into production systems
    • Compatible with third-party equivalent circuit analysis software
    • Reliable for both R&D and manufacturing applications

     

    Add to cart
    Learn More
  • Hioki CM3289 Clamp Meter - 1
    Hioki CM3289 Clamp Meter - 2
    Quick View
    HIOKI E E CORPORATION Hioki CM3289 Clamp Meter USD $ 165.27

    Hioki CM3289 Clamp Meter is a True RMS AC clamp meter designed for precise current measurement, even in tight or challenging environments.

    Key Features:

    • Measures AC current up to 1000 A with True RMS accuracy
    • Wide operating range from -25°C to 65°C for harsh conditions
    • Slim and compact clamp design for confined spaces
    • Optional flexible sensor CT6280 for measuring up to 4199 A
    • Measures voltage, resistance, and continuity in one device
    • Drop-resistant and engineered for rugged environments
    • Long battery life with auto power-save function

     

    Add to cart
    Learn More
  • Hioki CM4371-50 Clamp Meter - 1
    Hioki CM4371-50 Clamp Meter - 2
    Quick View
    HIOKI E E CORPORATION Hioki CM4371-50 Clamp Meter USD $ 349.47

    Hioki CM4371-50 Clamp Meter delivers high-precision AC/DC measurements with advanced safety and wireless data features, ideal for demanding electrical work.

    Key Features:

    • True RMS measurement up to 600 A AC/DC
    • CAT IV 600 V, CAT III 1000 V safety ratings
    • Measures DC voltages up to 2000 V with optional probe
    • Wireless data transfer via GENNECT Cross app and Z3210 adapter
    • Harmonic analysis up to the 30th order for system diagnostics
    • Simultaneous RMS and crest inrush current measurement
    • Automatic AC/DC detection for efficient testing
    • Compact, rugged design for field reliability

     

    Select options This product has multiple variants. The options may be chosen on the product page
    Learn More
  • Hioki CM4373-90 Clamp Meter - 1
    Hioki CM4373-90 Clamp Meter - 2
    Quick View
    HIOKI E E CORPORATION Hioki CM4373-90 Clamp Meter USD $ 401.16

    Hioki CM4373-90 True RMS 2000A AC/DC Clamp Meter delivers precision and reliability for professionals working in demanding environments. Built for durability and accuracy, it includes a wireless adapter for real-time data transfer and enhanced field productivity.

    Key Features:

    • Measures up to 2000 A AC/DC with True RMS accuracy
    • CAT IV 600 V, CAT III 1000 V safety rating
    • Wireless connectivity via Z3210 adapter for instant data transfer
    • Supports harmonic analysis (1st–30th order) using GENNECT Cross app
    • Measures up to 2000 V DC with optional P2010 probe
    • Automatic AC/DC detection for improved workflow efficiency
    • IP54-rated enclosure for dust and water resistance
    • Ideal for solar PV inspections, EV systems, and industrial maintenance

     

    Select options This product has multiple variants. The options may be chosen on the product page
    Learn More
  • Hioki CM4375-90 Clamp Meter - 1
    Hioki CM4375-90 Clamp Meter - 2
    Quick View
    HIOKI E E CORPORATION Hioki CM4375-90 Clamp Meter USD $ 401.16

    Hioki CM4375-90 True RMS 1000A AC/DC Clamp Meter delivers precision and reliability with a slim jaw design that fits easily into tight spaces. Built for modern electrical work, it features a wireless adapter for effortless data transfer and is ideal for solar, EV, and industrial applications.

    Key Features:

    • Measures up to 1000A AC/DC with True RMS accuracy
    • Slim jaw design fits easily in tight panels and wiring setups
    • Wireless communication via Z3210 adapter for fast data transfer
    • Measures up to 2000V DC with optional P2010 probe
    • CAT IV 600V / CAT III 1000V safety rating
    • IP54 dustproof and waterproof design for durability
    • Harmonic analysis (1st–30th order) using GENNECT Cross app
    • Auto AC/DC detection and inrush current measurement for motors and equipment
    • Guaranteed for 30,000 open-close jaw cycles

     

    Select options This product has multiple variants. The options may be chosen on the product page
    Learn More
  • IMPEDANCE ANALYZER IM3570
    IMPEDANCE ANALYZER IM3570
    Quick View
    HIOKI E E CORPORATION IMPEDANCE ANALYZER IM3570 USD $ 11,179.47

    A high-speed, high-precision LCR meter ideal for low-ESR and impedance testing in advanced electronic components like polymer capacitors, inductors, and piezoelectric elements.

    Key Features:

    • Continuous LCR/DCR/sweep measurements with one instrument
    • Ultra-fast testing speeds: 1.5 ms (1 kHz), 0.5 ms (100 kHz)
    • High accuracy: ±0.08% basic accuracy for Z parameter
    • Ideal for low-ESR measurement of functional polymer capacitors
    • Suitable for resonance testing of piezoelectric elements
    • Accurate DCR and L-Q testing of inductors, coils, and transformers
    Learn More
  • IMPEDANCE ANALYZER IM7580A
    IMPEDANCE ANALYZER IM7580A - 2
    Quick View
    HIOKI E E CORPORATION IMPEDANCE ANALYZER IM7580A USD $ 14,517.66

    The Hioki IM7580A is a compact, high-speed impedance analyzer for 1 MHz to 300 MHz testing, ideal for both production and R&D. It works seamlessly with the IM9201 SMD fixture for reliable component testing.

    Key Features:

    • 1 MHz to 300 MHz frequency range
    • 0.5 ms test speed
    • ±0.72% basic accuracy
    • Compact half-rack size with palm-sized test head
    • Reliable contact check functions
    • Frequency, level, and time sweeps in Analyzer Mode
    • RF I-V method for precise measurement
    Learn More
  • IMPEDANCE ANALYZER IM7581
    IMPEDANCE ANALYZER IM7581 - 2
    Quick View
    HIOKI E E CORPORATION IMPEDANCE ANALYZER IM7581 USD $ 17,671.64

    The Hioki IM7581 is a compact, high-speed impedance analyzer designed for accurate testing from 100 kHz to 300 MHz. It’s ideal for both production and development environments.

    Key Features:

    • 100 kHz to 300 MHz frequency range
    • 0.5 ms fastest test speed
    • ±0.72% basic accuracy
    • Compact half-rack size, palm-sized test head
    • Reliable contact check via DCR, Hi-Z reject, or waveform judgment
    • Supports frequency, level, and time sweeps in Analyzer Mode
    • Uses RF I-V method for precise measurement
    Learn More
  • Impedance Analyzer IM7587 3 GHz
    Impedance Analyzer IM7587 3 GHz
    Quick View
    HIOKI E E CORPORATION IMPEDANCE ANALYZER IM7587 3 GHz USD $ 29,638.88

    The Hioki Impedance Analyzer IM7587 3 GHz provides precision, speed, and versatility for impedance measurements from 1 MHz to 3 GHz, ideal for both R&D and mass production applications in electronic component testing.

    Key Features:

    • Frequency range: 1 MHz to 3 GHz
    • Test speed: 0.5 ms
    • Measurement variability: 0.07%
    • Basic accuracy: ±0.65% reading
    • RF I-V measurement technique
    • Compact half-rack design with palm-sized test head
    • Robust contact check capabilities
    • Analyzer mode: frequency and level sweeps, time interval measurements
    Learn More
  • 3280-20F Rugged AC Clamp Meter
    3280-20F Rugged AC Clamp Meter
    Quick View
    HIOKI E E CORPORATION Hioki 3280-20F Rugged AC Clamp Meter

    Key Features:

    • Measure even harmonic waveform components using the True RMS method
    • Expanded -25°C to 65°C operating temperature range
    • Connect the CT6280 flexible sensor to measure up to 4199 A in thick or paired wires
    • Drop proof design withstands drop from a height of 1 meter

     

    Learn More
  • CM4141-50 AC Clamp Meter
    CM4141-50 AC Clamp Meter-2 product image from TMetrix in Canada
    Quick View
    HIOKI E E CORPORATION Hioki CM4141-50 AC Clamp Meter USD $ 299.96
    • CAT IV 600 V, CAT III 1000 V
      When using P2000: CAT III 2000 V, CAT IV 1000 V
    • Easily get into tight spaces between cables thanks to thin sensor with a minimum cross-section span of 11 mm
    • Measure up to 2000 A AC
    • AC A, AC and DC V, DC+AC V, resistance, frequency, and more
    • Easily transfer measurement data to your smartphone or tablet by using our free app GENNECT Cross or to an Excel® file (*1)
    • Harmonic analysis from 1st to 30th order with GENNECT Cross (*1)

     

    Add to cart
    Learn More
  • Hioki AC CLAMP METER 3280-10F
    Hioki AC CLAMP METER 3280-10F
    Quick View
    HIOKI E E CORPORATION Hioki AC CLAMP METER 3280-10F with Broad Operating Temperature Range, Attachable Flexible Sensor, and Drop-Proof Durability USD $ 85.18
    • Measure the fundamental waveform component using the average rectified method
    • Expanded -25 °C to 65 °C operating temperature range
    • Connect the CT6280 flexible sensor to measure up to 4199 A in thick or paired wires
    • Drop proof design withstands drop from a height of 1 meter

     

    Add to cart
    Learn More