PRODUCTS
TMetrix carries the following test and measurement products:
SERVICES
Explore our range of technical support and calibration services:
1 800 665 7301 | [email protected]

About Us | Events | Support | Resource Centre | Line Card | News | Blog | Careers | Contact Us

Products

Showing 1–16 of 116 results

  • 240-1C DC Power Supply
    240-1C DC Power Supply
    Quick View
    Absolute EMC 240-1C DC Power Supply

    Precision, performance, and scalability packed into a high-efficiency DC power solution. Ideal for demanding test environments and energy recovery.

    Key Features:

    • Output voltage: 0–240 V DC
    • Scalable from 27 kW to 2000+ kW
    • Modular build: up to 44 connected units
    • Full sink/source operation with regeneration
    • Ultra-fast switching: rise/fall time <250 µs
    • Accuracy: <0.02% FS with high-res current range
    • Auto-ranging capability (factor of 3)
    • Control modes: CV, CC, CP, CR, Ri-Sim
    • Seamless waveform generation via AnyWave + WaveMaster
    • Optional HMI touchscreen and CAN interface

     

    Learn More
  • 305-AC Power Supply
    305-AC Power Supply
    Quick View
    Absolute EMC 305-AC Power Supply

    High-speed, modular AC power supply with precision control and full regeneration. Perfect for grid simulation, HIL testing, and EMC validation.

    Key Features:

    • Power scalable from 30 kVA to 1050+ kVA
    • Voltage range: 0–305 V AC with 4 active outputs
    • True 4-quadrant regenerative design for energy efficiency
    • Ultra-fast switching time (≤200 µs response)
    • High current accuracy <0.02% full scale
    • Full digital control modes: CV, CC, CP, CR, Ri-Sim
    • Programmable grid simulator, AC amplifier, or electronic RLC load
    • Compatible with AnyWave & WaveMaster for custom waveform control
    • Modular 19” rack-mounted units with low heat and noise output
    • Ideal for automotive, aerospace, HIL, EMC, and renewable power testing
    Learn More
  • 320-1C DC Power Supply
    320-1C DC Power Supply
    Quick View
    Absolute EMC 320-1C DC Power Supply

    A precision-driven, regenerative DC power supply ideal for high-demand testing environments across industries.

    Key Features:

    • Voltage range: 0 to 320 V DC
    • Power output: 36 to 2000+ kW
    • Modular and scalable up to 44 units
    • Regenerative sink and source operation
    • Voltage rise/fall time <250 µs
    • Accuracy <0.02% FS with high-res current range
    • Auto-ranging factor of 3
    • Full digital control: CV, CC, CP, CR, Ri-Sim
    • Supports AnyWave + WaveMaster waveform control
    • Optional touchscreen HMI and CAN interface
    Learn More
  • 3506-10 C Meter - 01
    3506-10 C Meter - 03
    Quick View
    HIOKI E E CORPORATION 3506-10 C Meter

    The Hioki 3506-10 C Meter is a high-speed dual-band capacitance meter designed specifically for ceramic capacitor testing on automated production lines. Built for seamless integration with taping machines and sorting systems, it delivers fast, stable, and repeatable measurements even in demanding manufacturing environments.

    Key Features

    • Dual measurement frequencies of 1 kHz and 1 MHz
    • Ultra-fast analog test time of 0.6 ms at 1 MHz
    • Stable low-capacitance measurement for MLCC production
    • Enhanced noise resistance for reliable inline testing
    • BIN function for efficient component screening
    • Designed for integration with taping machines and sorters
    • Excellent repeatability for high-volume manufacturing

     

    Learn More
  • 60-1C DC Power Supply - 1
    Quick View
    Absolute EMC 60-1C DC Power Supply

    Advanced regenerative DC power supply with full sink/source capability, ultra-fast dynamics, and exceptional precision for demanding applications.

    Key Features:

    • Scalable from 9 kW to 2000+ kW
    • Precise voltage range: 0–60 V DC
    • Sink/source mode with full power regeneration
    • Exceptional current accuracy <0.02% full scale
    • Fast voltage rise/fall times under 250 µs
    • Full digital control: CV, CC, CP, CR, Ri-Sim
    • Modular setup: parallel, series, or mixed mode
    • Auto-ranging factor of 3 for wide flexibility
    • Supports CAN, API, and optional HMI touchscreen
    • Seamless waveform generation via AnyWave + WaveMaster
    • Ideal for automotive, aerospace, HIL, and EMC testing
    Learn More
  • 80-1C DC Power Supply
    80-1C DC Power Supply
    Quick View
    Absolute EMC 80-1C DC Power Supply

    High-efficiency regenerative DC power supply with scalable architecture and ultra-fast switching. Ideal for demanding test environments.

    Key Features:

    • Voltage range: 0–80 V DC
    • Power scalable from 9 kW to 2000+ kW
    • Modular: Up to 44 units (parallel, series, combined)
    • Full sink/source mode with energy recovery
    • Voltage rise/fall time <250 µs
    • Current accuracy <0.02% FS
    • Auto-ranging with a factor of 3
    • Digital control: CV, CC, CP, CR, Ri-Sim
    • User-friendly software and HMI options
    • AnyWave + WaveMaster for waveform control
    • CAN, API, and high-speed bus support
    Learn More
  • AIM-TTi 1908 Multimeter -1
    AIM-TTi 1908 Multimeter - 2
    Quick View
    Aim-TTi AIM-TTi 1908 Multimeter CAD $929.00

    AIM-TTi 1908 Series – 5.5 Digit Dual Display Multimeter
    High-performance, bench-top or portable multimeter for professional-grade precision and versatility.

    Key Features:

    • 5.5-digit resolution with dual display
    • True RMS AC + frequency, capacitance & temperature measurements
    • Dual measurement capability for parallel data monitoring
    • USB standard (1908); USB, RS232, LAN/LXI on 1908P
    • Optional GPIB interface (1908P)
    • Powered by AC mains or internal rechargeable batteries
    • High accuracy up to 0.02%, resolution down to 1µV and 0.1µA
    • Ideal for both laboratory and field applications
    • PC-Link software included for remote control and data logging

     

    Select options This product has multiple variants. The options may be chosen on the product page
    Learn More
  • BLS SU 600 Switching Unit - 1
    BLS SU 600 Switching Unit - 5
    Quick View
    Absolute EMC BLS SU 600 Switching Unit

    A modular, scalable, and intelligent matrix switching system designed for precision in multi-channel test applications.

    Key Features:

    • Modular design with up to 4 plugin switch cards
    • 6×32 channel matrix, up to 2A per channel
    • Remote control via TCP/IP interface
    • Integrated diagnostics & safety monitoring
    • Compatible with LabView, Python, C++, CANoe, and more
    • Auto-cooling with smart fan activation
    • Rack-mountable 4HU chassis with high build quality
    • Expandable switching lines with CU-600 matrix
    • Unlimited waveform size with dual waveform output
    • Protocol generation and oscilloscope waveform simulation

     

    Learn More
  • BOLAB ISO 7637-4 Test System - 1
    BOLAB ISO 7637-4 Test System - 2
    Quick View
    Absolute EMC BOLAB ISO 7637-4 Test System

    The complete turnkey solution for testing high-voltage transient emissions and immunity under ISO 7637-4 standards.

    Key Features:

    • Full ISO 7637-4 compliance
    • Pulse A: Switching noise simulation (100 kHz–10 MHz)
    • Pulse B: Low-frequency sinusoidal testing (3 kHz–300 kHz)
    • 75W high-power RF amplifier for clean signal output
    • Configurable burst generation (1–1000 cycles)
    • Galvanically isolated digital I/O and EUT interlock
    • Scalable and modular hardware for custom test setups
    • Integrated overvoltage and transient protection
    • WaveMaster software with graphical waveform creation
    • Compatible with LabView, Python, C++, and more

     

    Learn More
  • CAR AWG 6000 Battery Simulator - 1
    CAR AWG 6000 Battery Simulator - 2
    Quick View
    Absolute EMC CAR AWG 6000 Battery Simulator

    The CAR AWG 6000 is a high-performance, 4-quadrant battery simulator designed for EMC testing on vehicle supply lines. This powerful unit delivers precise voltage variations up to ±70V and 200A, compliant with international automotive standards.

    Key Features:

    • 4-quadrant voltage/current amplifier
    • Battery simulation up to ±70V and 200A
    • Compliant with ISO 7637-2, LV 124, LV 148, and more
    • Arbitrary waveform generation at 20MSa/s, 16kSa
    • Bandwidth up to 1 MHz for small signals
    • Simulates pulse 2b, pulse 4, crank profiles, and AC ripple
    • Selectable output impedance: 0–200 mΩ
    • Overvoltage and overcurrent protection
    • Integrated impulse recording function (IRF)
    • Remote control via CAR-Remote software and Ethernet

     

    Learn More
  • CAR PS 1500 Battery Simulator - 1
    CAR PS 1500 Battery Simulator - 2
    Quick View
    Absolute EMC CAR PS 1500 Battery Simulator

    A powerful battery simulator designed for high-voltage automotive testing up to 1500V. Compact, efficient, and ISO 7637-4:2020 compliant.

    Key Features:

    • Output voltage up to 1500V DC
    • Supports 30A at 500V, 10A at 1500V
    • Constant power delivery of 15kW
    • Slew rate up to 100V/µs for rapid rise time
    • Remote PC control via CAR-Remote software
    • Parallel stacking up to 10 units (100A total)
    • Compliant with ISO 7637-2, ISO 7637-4, FMC1280
    • Compact desktop design with built-in Ethernet
    • Robust overvoltage and overcurrent protection

     

    Learn More
  • CHEMICAL IMPEDANCE ANALYZER IM3590
    CHEMICAL IMPEDANCE ANALYZER IM3590 - 2
    Quick View
    HIOKI E E CORPORATION CHEMICAL IMPEDANCE ANALYZER IM3590 CAD $14,925.00

    A high-performance analyzer designed for R&D applications involving electrochemical components, materials, batteries, and EDLCs. It enables precise impedance measurements essential for advanced evaluation and development.

    Key Features:

    • Wide frequency range: 1 mHz to 200 kHz for detailed ion and solution behavior analysis
    • Dual function: High-speed continuous LCR and sweep measurements with one device
    • Battery analysis: Measures internal impedance under no-load conditions
    • Ultra-fast sweep: Perform measurements in as little as 2 ms
    • High accuracy: ±0.05% basic precision for reliable R&D and testing
    • Advanced analysis: Supports Cole-Cole plots and equivalent-circuit modeling for electrochemical studies
    Add to cart
    Learn More
  • Digital Multimeter DT4281 - 01
    Quick View
    HIOKI E E CORPORATION Digital Multimeter DT4281

    The Digital Multimeter DT4281 is Hioki’s flagship high precision multimeter, engineered for advanced electrical and power system testing. Featuring a 60000 count display, true RMS measurement, and industry leading safety design, it delivers fast, accurate results even in complex and high energy environments.

    Key Features

    • High resolution 60000 count digital multimeter
    • Excellent DC voltage accuracy of ±0.025 percent
    • Wide AC voltage frequency range from 20 Hz to 100 kHz
    • True RMS measurement for accurate readings on distorted waveforms
    • Low pass filter for inverter and harmonic rich signals
    • Clamp sensor based current measurement for enhanced safety
    • Terminal shutter mechanism to prevent incorrect lead insertion
    • Dual display for simultaneous voltage and frequency monitoring
    • CAT IV 600 V and CAT III 1000 V safety rated
    • Designed and manufactured in Japan with 3 year warranty

     

    Learn More
  • Digital Phase Detector PD3259-50 - 1
    Digital Phase Detector PD3259-50 - 2
    Quick View
    HIOKI E E CORPORATION Digital Phase Detector PD3259-50 CAD $1,148.00

    Hioki Digital Phase Detector PD3259-50 ensures fast, non-contact, and safe phase detection with three-phase voltage measurement. Designed for maximum efficiency, it eliminates the need for metal contact, making it ideal for on-site electrical testing and maintenance.

    Key Features:

    • Non-contact three-phase voltage measurement and phase detection.
    • Safe operation—no metal contact required.
    • Simultaneous phase sequence and voltage inspection.
    • Compatible with Wireless Adapter Z3210 for Bluetooth® communication.
    • Data transfer and report creation using free GENNECT Cross app.
    • Visual and audio alerts for phase detection status.
    • Durable IP54 dustproof and waterproof design.

     

    Select options This product has multiple variants. The options may be chosen on the product page
    Learn More
  • Digital Power Meters
    Digital Power Meters
    Quick View
    Teledyne LeCroy Digital Power Meters CAD $2,385.00

    Teledyne Test Tools Digital Power Meters provide reliable, high-precision AC and DC power measurements in a compact design. Ideal for R&D, QA, and compliance testing.

    Key Features:

    • Bandwidth: DC, 0.1 Hz to 100 kHz
    • High-resolution 4″ and 5″ TFT LCD displays
    • 19 power measurement parameters
    • 16-bit ADC and 300 kHz sampling rate (T3PM1100)
    • Waveform, harmonic, and integration functions
    • External current sensor input (T3PM1100)
    • Supports IEC 62301 and IEC 61000-4-7 standards
    • Interfaces: USB, LAN, RS-232C
    • Front/rear terminal inputs for flexible testing

     

    Select options This product has multiple variants. The options may be chosen on the product page
    Learn More
  • Dips Interrupts Test System - 2
    Dips Interrupts Test System - 3
    Quick View
    Absolute EMC Dips Interrupts Test System

    The Dips Interrupts Test System is a turnkey EMC solution for immunity testing across multiple IEC/EN 61000-4 standards. Available in 30kVA (43A) and 50kVA (75A) versions, this system is ideal for grid simulation, compliance testing, and R&D validation.

    Key Features:

    • Fully compliant with IEC/EN 61000-4-11/-13/-14/-27/-28/-34
    • Fast switching: <5 µs voltage transition time
    • Regenerative 4-quadrant AC grid simulator
    • TC.VSE Voltage Slope Enhancer with 1000 A peak current
    • Power range from 30 kVA up to 2000+ kVA
    • User-friendly ACSControl software with test libraries
    • Graphical interface for waveform preview and reporting
    • Applications include EMC, inverter, anti-islanding, and medical testing
    • Compact rack-mounted design with global certifications (CE, UKCA, RoHS)

     

    Learn More

Showing 1–16 of 116 results