Products

Precision, performance, and scalability packed into a high-efficiency DC power solution. Ideal for demanding test environments and energy recovery.

Key Features:

• Output voltage: 0–240 V DC
• Scalable from 27 kW to 2000+ kW
• Modular build: up to 44 connected units
• Full sink/source operation with regeneration
• Ultra-fast switching: rise/fall time <250 µs
• Accuracy: <0.02% FS with high-res current range
• Auto-ranging capability (factor of 3)
• Control modes: CV, CC, CP, CR, Ri-Sim
• Seamless waveform generation via AnyWave + WaveMaster
• Optional HMI touchscreen and CAN interface

Precision meets performance in this regenerative, modular, and highly controllable DC power supply for high-voltage testing applications.

Key Features:

• Output voltage: 0 to 3000 V DC
• Power range: 54 to 2000+ kW
• Fast response: <250 µs rise/fall times
• Regenerative sink/source operation
• High current accuracy: <0.02% FS
• Auto-ranging voltage-current flexibility (factor 3)
• Full digital modes: CV, CC, CP, CR, Ri-Sim
• Modular design with up to 44 units
• Optional HMI touchscreen and CAN interface
• Waveform generation via AnyWave + WaveMaster

High-speed, modular AC power supply with precision control and full regeneration. Perfect for grid simulation, HIL testing, and EMC validation.

Key Features:

• Power scalable from 30 kVA to 1050+ kVA
• Voltage range: 0–305 V AC with 4 active outputs
• True 4-quadrant regenerative design for energy efficiency
• Ultra-fast switching time (≤200 µs response)
• High current accuracy <0.02% full scale
• Full digital control modes: CV, CC, CP, CR, Ri-Sim
• Programmable grid simulator, AC amplifier, or electronic RLC load
• Compatible with AnyWave & WaveMaster for custom waveform control
• Modular 19” rack-mounted units with low heat and noise output
• Ideal for automotive, aerospace, HIL, EMC, and renewable power testing

The 3110A Standards Waveform Generator is a feature-rich, intuitive tool for engineers conducting EMC testing. From automotive to aviation applications, this unit simplifies the most complex test routines.

Key Features:

• 3,400+ Built-In Tests for automotive and industry standards
• Fast Rise Time: 3 µs full-scale with up to 1 MHz bandwidth
• Segment-Based Waveform Creation for custom sequences
• Free Lifetime Standards Updates
• Automated Triggering via GPIO or LAN
• Flexible Output Control including frequency, amplitude, and DC offset
• Extremely Precise Resolution: 0.01 Hz frequency, 76 µV amplitude
• Supports All Common Waveforms: Sine, square, triangle, DC, ripple, and more

A precision-driven, regenerative DC power supply ideal for high-demand testing environments across industries.

Key Features:

• Voltage range: 0 to 320 V DC
• Power output: 36 to 2000+ kW
• Modular and scalable up to 44 units
• Regenerative sink and source operation
• Voltage rise/fall time <250 µs
• Accuracy <0.02% FS with high-res current range
• Auto-ranging factor of 3
• Full digital control: CV, CC, CP, CR, Ri-Sim
• Supports AnyWave + WaveMaster waveform control
• Optional touchscreen HMI and CAN interface

The Hioki 3269 Power Supply is a four-channel unit designed to provide stable power to Hioki flat bandwidth AC/DC current probes, including the 3273-50 to 3276 series, CT6700, and CT610 series. It enables accurate current measurement output for Memory HiCorders, oscilloscopes, and other data acquisition instruments.

Key Features

• Supplies power to Hioki current probes 3273-50 to 3276, CT6700, CT610 series
• Four-channel power output for multi-probe setups
• Compatible with Memory HiCorders and oscilloscopes
• Output voltage: ±12 V ±0.5 V, maximum 2.5 A (total of all channels)
• Compact and lightweight design: 80 × 119 × 200 mm, 1.1 kg
• Wide AC input range: 100–240 V AC, 50/60 Hz, 170 VA max
• Simple integration into data acquisition setups
• Note: Requires compatible current sensor to operate

The Hioki 3272 Power Supply is a single-channel unit designed to provide stable power to Hioki 3270 Series AC/DC clamp-on probes and CT6700 series sensors. It ensures accurate current signal output for Memory HiCorders, oscilloscopes, and other general-purpose instruments.

Key Features

• Compatible with Hioki 3273-50, 3274, 3275, 3276, and CT6700 series probes
• Single-channel power supply for precise current measurement
• Supports Memory HiCorders, oscilloscopes, and recorders
• Output voltage: ±12 V ±0.5 V, 600 mA total
• Compact size: 73 × 110 × 186 mm, weight 1.1 kg
• AC input options: 100/120/220/240 V, 50/60 Hz, 20 VA max
• Comes with power cord, instruction manual, and spare fuse
• Cannot be used alone; requires compatible current probe

The Hioki 3273-50 Clamp On Probe is a high-performance wideband current probe designed for oscilloscopes and Memory HiCorders. It captures transient and steady-state current waveforms from 10 mA to 30 A with excellent fidelity. Its advanced design allows accurate observation of low currents even near high-current lines.

Key Features

• Wideband DC to 50 MHz waveform observation
• High S/N characteristics for 10 mA order currents
• Direct BNC connection to oscilloscope or Memory HiCorder
• High-permeability magnetic shield reduces electric field interference
• Supports transient current measurement in power supplies, inverters, and motor controllers
• Paired zero-flux method and thin-film Hall elements for precise wideband measurement
• Optional Power Supply 3269/3272 for stable operation

The Hioki 3274 Clamp On Probe is a high-precision wideband current sensor designed for capturing transient and steady-state currents in industrial applications. With a DC to 10 MHz bandwidth and continuous current handling up to 150 A, this probe is ideal for waveform observation with oscilloscopes and Memory HiCorders.

Key Features

• Wideband waveform observation from DC to 10 MHz
• Measures currents up to 150 A continuously
• Handles peak currents up to 500 A (short pulse)
• Direct BNC connection to oscilloscope or Memory HiCorder
• High permeability magnetic shield minimizes interference
• Ideal for inverters, motors, and power supply measurements
• Optional Power Supply 3269/3272 for continuous operation
• Compact and portable design with carrying case included

The Hioki 3275 Clamp On Probe is a high-performance wideband current sensor engineered for accurate waveform capture with oscilloscopes and Memory HiCorders. Designed for environments with high-voltage switching or magnetic interference, it measures currents up to 500 A with DC to 2 MHz bandwidth.

Key Features

• Wideband waveform observation from DC to 2 MHz
• Measures currents up to 500 A continuously
• Direct BNC connection to oscilloscope or Memory HiCorder
• Electrostatic shield minimizes interference from nearby fields
• Zero-flux and Hall element detection for precise measurement
• Ideal for inverters, motors, and high-voltage switching equipment
• Optional Power Supply 3269/3272 for continuous operation

The Hioki 3276 Clamp On Probe is a high-performance wideband current sensor designed for accurate waveform measurement with oscilloscopes and Memory HiCorders. It captures transient and steady-state currents from 10 mA to 30 A with high fidelity, making it ideal for advanced electronics applications.

Key Features

• Wideband waveform observation from DC to 100 MHz
• High S/N ratio for 10 mA order current measurement
• Direct BNC connection to oscilloscope or Memory HiCorder
• High-permeability magnetic shield reduces interference
• Captures transient currents in power supplies, inverters, and motor controllers
• Low insertion loss minimizes derating from sensor heating
• Compatible with optional Power Supply 3269/3272 for stable operation

The Hioki 3504 C HiTESTER is a dual-band capacitance meter designed for high-speed inspection of large-capacitance MLCCs on automated taping and sorting machines. Using constant voltage testing, it ensures stable and repeatable measurements while detecting contact errors to improve production yield.

Key Features

• Dual measurement frequencies of 120 Hz and 1 kHz
• Fast measurement time of 2 ms for inline testing
• Constant voltage testing for voltage-dependent capacitance
• Continuous contact error monitoring during measurement
• BIN function for automated sorting and classification
• Advanced 4-terminal contact check on selected models
• Optimized for integration with taping machines

The Hioki 3506-10 C Meter is a high-speed dual-band capacitance meter designed specifically for ceramic capacitor testing on automated production lines. Built for seamless integration with taping machines and sorting systems, it delivers fast, stable, and repeatable measurements even in demanding manufacturing environments.

Key Features

• Dual measurement frequencies of 1 kHz and 1 MHz
• Ultra-fast analog test time of 0.6 ms at 1 MHz
• Stable low-capacitance measurement for MLCC production
• Enhanced noise resistance for reliable inline testing
• BIN function for efficient component screening
• Designed for integration with taping machines and sorters
• Excellent repeatability for high-volume manufacturing

Key Features:

• Dual-channel arbitrary waveform generation with 2.8 MS/s sampling rate and 16-bit resolution.
• Integrated with BOLAB WaveMaster software for graphical and tabular waveform design.
• Endless waveform streaming with double buffer memory for uninterrupted operation.
• Real-time triggering, data acquisition, and live waveform editing.
• Supports importing oscilloscope data, ASCII, and TDMS files.
• Preloaded waveform libraries for LV 124, LV 148, ISO 7637-2, ISO 16750-2, GMW, JLR, VW standards.
• Seamless integration with LabView, Python, CANoe, MATLAB, C/C++ via DLLs.
• Compact and robust design for laboratory and industrial testing applications.

The 7224 Linear Amplifier delivers power, speed, and precision in a compact 2U form factor. Designed for lab, test, and simulation environments, it provides outstanding performance for demanding applications.

Key Features:

• Up to 900W RMS output power
• Operates in controlled-current or controlled-voltage mode
• Field-configurable for low or high impedance loads
• DC to 1 MHz small signal bandwidth
• Produces up to 50A current or 158V peak
• Slew rate of 90 V/μs for sharp waveform reproduction
• Over-voltage, over-current, and over-temp protection circuits
• Compact 2U rack-mount or benchtop design
• Suitable for Helmholtz coil drivers, MRI/NMR, SMPS component testing

The 7548 Linear Amplifier is a high-output, low-noise solution engineered for precision and reliability in demanding environments.

Key Features:

• Up to 100 Ap / 195 Vp output
• Delivers 12,000W peak power for 40 ms
• Supports continuous 5,500W output into 1Ω load
• Operates from DC to 100 kHz bandwidth
• Field-selectable current or voltage mode
• Ideal for MIL-STD-704F three-phase testing
• Stackable for 800 Vp or 170 Ap system output
• Built-in protection against over-voltage, over-temp, and overload
• Intuitive LCD display and status indicators