Products

• Current measurement from insulated probing of conductor
• Suitable for observation and measurement of current in PCB tracks, component leads and ground planes
• Wide dynamic range of 10mA to 20A peak to peak
• Wide bandwidth of DC to 5MHz
• Low noise figure equivalent to <6mA rms at full B/W
• Safety rated to 300V Cat II (600V Cat 1)
• Suitable for connection to any oscilloscope
• High accuracy general purpose H-field probe
• Converts to ‘closed magnetic circuit’ current probe

The CDG 7000 is a new test generator for all standards on immunity to conducted disturbances induced by high-frequency fields – including BCI tests (ISO 11452-4). One of the very few combined IEC 61000-4-6 test systems that contain the RF signal generator, an RF power amplifier, a 3-channel RF voltmeter, and a directional coupler at a very affordable price. IEC 60601-1-2 calling out IEC 61000-4-39 magnetic immunity for close proximity testing requirements can also now be met with the 10 kHz unit.

• Frequency Range:
  • 10 kHz – 30 MHz Conducted
  • 5 MHz – 1GHz Radiated
• Frequency step:
  • 10/500 kHz switchable CE
  • 5/10 MHz switchable RE
• Includes: Generator, antenna, charger, wood case

• 10 kHz – 3 GHz, 40dB Gain, 5dB N.F.
• Compensation for long cable loss for EMI Measurement
• Improve system noise floor flatness
• High EMI performance
• High linearity LNA for EMI measurement
• High dynamic range
• Unconditionally Stable
• State-of-the-Art Technology

• EMI Measurements:
  • FFT-based dual-channel receiver
  • According to CISPR16-1-1
  • Peak, Quasi-Peak, and Average Detectors
  • Resolution Bandwidth Filters of 200 Hz, 9 kHz, and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL)
  • The fastest receiver in the market: Line and Neutral measurements with the 3 detectors simultaneously (6 simultaneous measurements)

• 3GHz RF analog signal generator
• AM, FM, PM, Sweep & Pulse Modulation
• Exceptionally Low Phase Noise of -145dBc/Hz @100MHz and 10@kHz offset
• Field ready, with 10” touch screen suited for day and night use and 2 hour battery operation
• Remotely programmable via MATLAB, Python, LabVIEW and other software programming environments.
• Removable uSD card for instrument security

• Protocol reports
• Generation of waveforms with synchronous data acquisition
• Modular Expandable
• Individual Waveform Generation
• Standard Libraries included
• Unlimited Waveform size
• 2 different Waveforms synchronously
• DLL’s for LabView, Vector CANoe / CAPL, C#, C++, ANSI C, Python, etc.
• Simulation of imported oscilloscope waveform

BOLAB revolutionizes EV testing with powerful, flexible, and modular HV Electric Vehicle Test Systems. These solutions offer high-speed testing, covering diverse profiles and budgets. Features include a modular design, adaptability, and WaveMaster Software for custom waveforms. Benefit from efficiency, precision, and cost-efficiency in EV testing. Discover the future of high-speed testing with BOLAB’s innovative solutions.

• High voltage output to 300Vp-p (±150V)
• Output current to 150 mA
• Full power bandwidth from DC to >500kHz
• Slew rate to 200V/µs
• Low distortion
• Low cost
• Custom Configuration of gain and signal Ground

• Single channel
• High voltage output to 400Vp-p (±200V)
• Output current to 125 mA
• Full power bandwidth from DC to >500kHz
• Slew rate to 400V/µs
• Monitor Output
• Precise signal amplification for multiple applications
• Compatible with any of the Tabor waveform generators

• High voltage output to 300Vp-p (±150V)
• Output current to 100 mA per channel
• Full power bandwidth from DC to >500kHz
• Slew rate to 200V/µs
• Low distortion
• Low cost
• Custom Configuration of: Gain, Signal Ground

• 12GHz RF Analog Signal Generator
• Extremely fast switching speed of <100μs
• AM, FM, PM Sweep & Pulse Modulation
• Extra small, compact module platform
• Exceptionally Low Phase Noise of -145dBc/Hz @100MHz and 10@kHz offset
• SPI and micro-USB integrated interfaces
• Remotely programmable via MATLAB, Python, LabVIEW
• and other software programming environments.
• Flixible modular platform for OEM and custom requirements
• and applications, to satisfy specific customer demands.
• Multi instrument synchronization capability

• 3 GHz RF Analog Signal Generator
• Extremely fast switching speed of <100μs
• AM, FM, PM Sweep & Pulse Modulation
• Extra small, compact module platform
• Exceptionally Low Phase Noise of -145dBc/Hz @100MHz and 10@kHz offset
• SPI and micro-USB integrated interfaces
• Remotely programmable via MATLAB, Python, LabVIEW
• and other software programming environments.
• Flixible modular platform for OEM and custom requirements
• and applications, to satisfy specific customer demands.
• Multi instrument synchronization capability

• 6GHz RF Analog Signal Generator
• Extremely fast switching speed of <100μs
• AM, FM, PM Sweep & Pulse Modulation
• Extra small, compact module platform
• Exceptionally Low Phase Noise of -145dBc/Hz @100MHz and 10@kHz offset
• SPI and micro-USB integrated interfaces
• Remotely programmable via MATLAB, Python, LabVIEW
• and other software programming environments.
• Flixible modular platform for OEM and custom requirements
• and applications, to satisfy specific customer demands.
• Multi instrument synchronization capability

• Proven member of a modular Power Module family, more than 800 units are in service
• Precision-regulated Bi-Polar output provides up to +12 to -12 Amps for Magnet loads.
• Smooth operation through zero amps output current, no “Crossover” problems.
• All 2510 MCOR12 Power Modules are identical and interchangeable.
• Has two high-precision measurements of output current;
  • one is used to close the regulation control loop,
  • provides an independent monitoring signal to the Crate Interface Card.
• Fault sensing circuitry in the module sets a Fault Latch which inhibits the output.
• A (momentary) Sync input signal inhibits MOSFET switching when it is active (high);
  • this eliminate switching noise .
  • reduces power line noise during sensitive analog signal measurements.

• Proven member of a modular Power Module family, more than 800 units are in service
• Precision-regulated Bi-Polar output provides up to +30 to -30 Amps for Magnet loads.
• Smooth operation through zero amps output current, no “Crossover” problems.
• All 2510R30 MCOR30 Power Modules are identical and interchangeable
  • Programming Card is plugged into the replacement module.
• Each channel has a critically-damped, LC noise filter with a cut-off frequency of about 8 kHz.
• A 16-pin front panel diagnostics connector taps onto major circuit nodes which enables quick “inthe-crate” fault evaluation