Products

Precision, performance, and scalability packed into a high-efficiency DC power solution. Ideal for demanding test environments and energy recovery.

Key Features:

• Output voltage: 0–240 V DC
• Scalable from 27 kW to 2000+ kW
• Modular build: up to 44 connected units
• Full sink/source operation with regeneration
• Ultra-fast switching: rise/fall time <250 µs
• Accuracy: <0.02% FS with high-res current range
• Auto-ranging capability (factor of 3)
• Control modes: CV, CC, CP, CR, Ri-Sim
• Seamless waveform generation via AnyWave + WaveMaster
• Optional HMI touchscreen and CAN interface

Precision meets performance in this regenerative, modular, and highly controllable DC power supply for high-voltage testing applications.

Key Features:

• Output voltage: 0 to 3000 V DC
• Power range: 54 to 2000+ kW
• Fast response: <250 µs rise/fall times
• Regenerative sink/source operation
• High current accuracy: <0.02% FS
• Auto-ranging voltage-current flexibility (factor 3)
• Full digital modes: CV, CC, CP, CR, Ri-Sim
• Modular design with up to 44 units
• Optional HMI touchscreen and CAN interface
• Waveform generation via AnyWave + WaveMaster

High-speed, modular AC power supply with precision control and full regeneration. Perfect for grid simulation, HIL testing, and EMC validation.

Key Features:

• Power scalable from 30 kVA to 1050+ kVA
• Voltage range: 0–305 V AC with 4 active outputs
• True 4-quadrant regenerative design for energy efficiency
• Ultra-fast switching time (≤200 µs response)
• High current accuracy <0.02% full scale
• Full digital control modes: CV, CC, CP, CR, Ri-Sim
• Programmable grid simulator, AC amplifier, or electronic RLC load
• Compatible with AnyWave & WaveMaster for custom waveform control
• Modular 19” rack-mounted units with low heat and noise output
• Ideal for automotive, aerospace, HIL, EMC, and renewable power testing

A precision-driven, regenerative DC power supply ideal for high-demand testing environments across industries.

Key Features:

• Voltage range: 0 to 320 V DC
• Power output: 36 to 2000+ kW
• Modular and scalable up to 44 units
• Regenerative sink and source operation
• Voltage rise/fall time <250 µs
• Accuracy <0.02% FS with high-res current range
• Auto-ranging factor of 3
• Full digital control: CV, CC, CP, CR, Ri-Sim
• Supports AnyWave + WaveMaster waveform control
• Optional touchscreen HMI and CAN interface

Key Features:

• Dual-channel arbitrary waveform generation with 2.8 MS/s sampling rate and 16-bit resolution.
• Integrated with BOLAB WaveMaster software for graphical and tabular waveform design.
• Endless waveform streaming with double buffer memory for uninterrupted operation.
• Real-time triggering, data acquisition, and live waveform editing.
• Supports importing oscilloscope data, ASCII, and TDMS files.
• Preloaded waveform libraries for LV 124, LV 148, ISO 7637-2, ISO 16750-2, GMW, JLR, VW standards.
• Seamless integration with LabView, Python, CANoe, MATLAB, C/C++ via DLLs.
• Compact and robust design for laboratory and industrial testing applications.

High-efficiency regenerative DC power supply with scalable architecture and ultra-fast switching. Ideal for demanding test environments.

Key Features:

• Voltage range: 0–80 V DC
• Power scalable from 9 kW to 2000+ kW
• Modular: Up to 44 units (parallel, series, combined)
• Full sink/source mode with energy recovery
• Voltage rise/fall time <250 µs
• Current accuracy <0.02% FS
• Auto-ranging with a factor of 3
• Digital control: CV, CC, CP, CR, Ri-Sim
• User-friendly software and HMI options
• AnyWave + WaveMaster for waveform control
• CAN, API, and high-speed bus support

Key Features:

• Wide frequency range: 9 kHz – 8 GHz
• High gain: 29 dB up to 6 GHz, 27 dB from 6 – 8 GHz
• Low noise figure: < 2.7 dB @ 1 GHz
• Compact aluminum housing (85 × 36 × 29 mm, 130 g)
• ESD-protected input for safe operation
• Operates on simple +12 V DC power supply
• Rugged and lightweight design for field and lab use

Bio-Freezers are high-performance laboratory freezers designed for safe storage of pharmaceuticals, vaccines, and biological samples. Built with advanced temperature control and forced-air circulation, they ensure stability and reliability in demanding lab environments.

Key Features

• Temperature range: -10°C to -30°C with 0.1°C increments
• Forced-air circulation for uniform cooling
• Large LED display and multiple sensors for accurate monitoring
• Auto defrost function for consistent performance in high humidity
• 60mm thick insulation for superior temperature stability
• Safety door lock and password protection to prevent unauthorized access
• CFC-free/HCFC refrigerant for eco-friendly operation
• Inner lighting for easy viewing of contents
• Available in multiple sizes: 23, 39, and 47 CuFt

A modular, scalable, and intelligent matrix switching system designed for precision in multi-channel test applications.

Key Features:

• Modular design with up to 4 plugin switch cards
• 6×32 channel matrix, up to 2A per channel
• Remote control via TCP/IP interface
• Integrated diagnostics & safety monitoring
• Compatible with LabView, Python, C++, CANoe, and more
• Auto-cooling with smart fan activation
• Rack-mountable 4HU chassis with high build quality
• Expandable switching lines with CU-600 matrix
• Unlimited waveform size with dual waveform output
• Protocol generation and oscilloscope waveform simulation

The complete turnkey solution for testing high-voltage transient emissions and immunity under ISO 7637-4 standards.

Key Features:

• Full ISO 7637-4 compliance
• Pulse A: Switching noise simulation (100 kHz–10 MHz)
• Pulse B: Low-frequency sinusoidal testing (3 kHz–300 kHz)
• 75W high-power RF amplifier for clean signal output
• Configurable burst generation (1–1000 cycles)
• Galvanically isolated digital I/O and EUT interlock
• Scalable and modular hardware for custom test setups
• Integrated overvoltage and transient protection
• WaveMaster software with graphical waveform creation
• Compatible with LabView, Python, C++, and more

Cannabis Extraction Chillers are engineered for precise cooling of ethanol, alcohol, and hydrocarbon solvents used in CBD and THC extraction. Designed for speed and reliability, these systems enhance extraction efficiency and throughput.

Key Features

• Cooling capability down to -80°C and below
• High cooling capacity up to 20kW at ultra-low temperatures
• Supports ethanol, alcohol, and hydrocarbon extraction
• Cryogenic and compressor-based system options
• Fast pull-down times for improved processing speed
• Compact footprint for easy integration
• Programmable touchscreen control with remote access
• Suitable for both large-scale and small-batch operations
• Built for high reliability with global support

The CAR AWG 6000 is a high-performance, 4-quadrant battery simulator designed for EMC testing on vehicle supply lines. This powerful unit delivers precise voltage variations up to ±70V and 200A, compliant with international automotive standards.

Key Features:

• 4-quadrant voltage/current amplifier
• Battery simulation up to ±70V and 200A
• Compliant with ISO 7637-2, LV 124, LV 148, and more
• Arbitrary waveform generation at 20MSa/s, 16kSa
• Bandwidth up to 1 MHz for small signals
• Simulates pulse 2b, pulse 4, crank profiles, and AC ripple
• Selectable output impedance: 0–200 mΩ
• Overvoltage and overcurrent protection
• Integrated impulse recording function (IRF)
• Remote control via CAR-Remote software and Ethernet

A powerful battery simulator designed for high-voltage automotive testing up to 1500V. Compact, efficient, and ISO 7637-4:2020 compliant.

Key Features:

• Output voltage up to 1500V DC
• Supports 30A at 500V, 10A at 1500V
• Constant power delivery of 15kW
• Slew rate up to 100V/µs for rapid rise time
• Remote PC control via CAR-Remote software
• Parallel stacking up to 10 units (100A total)
• Compliant with ISO 7637-2, ISO 7637-4, FMC1280
• Compact desktop design with built-in Ethernet
• Robust overvoltage and overcurrent protection

CDG 7000 Conducted Immunity Test System, 10 kHz – 400 MHz

Key Features:

• All-in-one IEC/EN 61000-4-6 immunity test system with RF signal generator, power amplifier, 3-channel RF voltmeter, and directional coupler.
• Frequency range from 10 kHz to 400 MHz with multiple amplifier versions (25 W, 75 W, 75 W/10k).
• Supports BCI tests (ISO 11452-4) and NAMUR standards.
• Advanced software HELIA 7 with EUT monitoring and automated reporting.
• Interfaces: USB, LAN, optional GPIB for flexible integration.
• Expandable with external amplifiers and configurable digital I/O.
• Compact, robust 19″ desktop housing with 3-year warranty.

Custom OEM Chillers are designed to meet the exact cooling requirements of manufacturers and end users. Engineered for precision and flexibility, these systems deliver reliable performance tailored to your unique process needs.

Key Features

• Fully customized cooling solutions for OEM and end users
• Designed for specific temperature, flow rate, and pressure needs
• Supports fluid, gas, and cryogenic cooling technologies
• Flexible footprint and system integration options
• Advanced remote communication capabilities
• Suitable for a wide range of industries
• High performance and reliability in demanding environments
• Scalable solutions with OEM and volume pricing options
• Built with decades of thermal engineering expertise

Custom Thermal Chambers are engineered to meet exact testing requirements for end users and OEM applications. Designed for flexibility and precision, these chambers deliver extreme temperature control with fully customizable configurations.

Key Features

• Temperature range from -185°C to +500°C
• Rapid transition rates up to 100°C per minute
• Fully customizable chamber size and footprint
• Flexible test access with ports, shelves, and windows
• Advanced controller with data logging capabilities
• Multiple communication interfaces including Ethernet and RS232
• Available in benchtop, rack mount, or stand configurations
• Certified with ISO, RoHS, CE, and UL standards
• Engineered specifically for your application needs