Test and Measurement Products

Quick View
AE Techron 3110A Standards Waveform Generator
The 3110A Standards Waveform Generator is a feature-rich, intuitive tool for engineers conducting EMC testing. From automotive to aviation applications, this unit simplifies the most complex test routines.

Key Features:
- 3,400+ Built-In Tests for automotive and industry standards
- Fast Rise Time: 3 µs full-scale with up to 1 MHz bandwidth
- Segment-Based Waveform Creation for custom sequences
- Free Lifetime Standards Updates
- Automated Triggering via GPIO or LAN
- Flexible Output Control including frequency, amplitude, and DC offset
- Extremely Precise Resolution: 0.01 Hz frequency, 76 µV amplitude
- Supports All Common Waveforms: Sine, square, triangle, DC, ripple, and more
Learn More
Quick View
AE Techron 7224 Linear Amplifier
The 7224 Linear Amplifier delivers power, speed, and precision in a compact 2U form factor. Designed for lab, test, and simulation environments, it provides outstanding performance for demanding applications.

Key Features:
- Up to 900W RMS output power
- Operates in controlled-current or controlled-voltage mode
- Field-configurable for low or high impedance loads
- DC to 1 MHz small signal bandwidth
- Produces up to 50A current or 158V peak
- Slew rate of 90 V/μs for sharp waveform reproduction
- Over-voltage, over-current, and over-temp protection circuits
- Compact 2U rack-mount or benchtop design
- Suitable for Helmholtz coil drivers, MRI/NMR, SMPS component testing
Learn More
Quick View
AE Techron 7548 Linear Amplifier
The 7548 Linear Amplifier is a high-output, low-noise solution engineered for precision and reliability in demanding environments.

Key Features:
- Up to 100 Ap / 195 Vp output
- Delivers 12,000W peak power for 40 ms
- Supports continuous 5,500W output into 1Ω load
- Operates from DC to 100 kHz bandwidth
- Field-selectable current or voltage mode
- Ideal for MIL-STD-704F three-phase testing
- Stackable for 800 Vp or 170 Ap system output
- Built-in protection against over-voltage, over-temp, and overload
- Intuitive LCD display and status indicators
Learn More
Quick View
AE Techron 7796HC Linear Power Amplifier
7796HC Linear Power Amplifier – High Current DC & AC Precision

Key Features:
- Output up to 85A continuous, 200A in-rush current
- Frequency response: DC to 100+ kHz
- Four-quadrant operation: source and sink
- Field-selectable voltage or current modes
- Stable with resistive, inductive, and capacitive loads
- Multiple protections: Over/under voltage, current, and temperature
- Supports DC ripple, surge, dropout, and ground noise simulations
- Ideal for high-current DC Conducted Immunity testing
- LCD with real-time voltage and current metrics
- Supports both balanced and unbalanced inputs
Learn More
Quick View
AE Techron 7800 Series Linear Amplifiers
7800 Series Linear Amplifiers are high-power, high-precision AC/DC amplifiers designed for demanding industrial and research applications.

Key Features:
- Power Output: Up to 20 kW continuous, 40 kW short-term
- Voltage: Up to ±500 Vp
- Current: Up to 800 A peak
- Bandwidth: DC to 60 kHz
- Four-quadrant operation: Source and Sink
- Modes: Selectable voltage or current control
- Protection: Overload, over-temp, short-circuit, and voltage fluctuations
- Ideal for: Resistive, inductive, and capacitive loads
- Low distortion: <0.25% THD
- High accuracy: DC drift < ±400 µV
Learn More
Quick View
AE Techron 8300 Series Power Amplifiers
8300 Series Power Amplifiers combine the precision of linear amplifiers with the efficiency of switch-mode technology for high-performance power delivery.

Key Features:
- Output Power: 2 kW to 10 kW (up to 50 kVA surge)
- Voltage Range: 0–140 VRMS / ±200 VDC
- Current: Up to 425A continuous, 65–300 ARMS
- Bandwidth: DC to 50 kHz
- Slew Rate: Up to 60 V/µs
- Ultra-low THD: <0.2%
- Operates in AC, DC, or AC+DC modes
- Flexible configuration: gain, current limit, impedance, and more
- Ideal for reactive, resistive, and complex loads
Learn More
Quick View
AE Techron AE Techron 8700 Series
AE Techron 8700 Series High-Frequency Power Amplifier

Key Features:
- Power output from 4 kW to 24 kW (up to 120 kVA)
- Voltage range up to ±400 Vp / 350 VDC
- Current output up to 360 ARMS continuous
- Wide bandwidth: DC to 250 kHz
- High slew rate: up to 300 V/µs
- Switch-mode efficiency with linear performance
- Scalable for both bench and rack applications
- Drives reactive and resistive loads with no power loss
- THD less than 0.8% with ultra-low noise floor
- Ideal for EMC, MIL-PRF, ISO 61000, and automotive testing
Learn More
Quick View
AE Techron AE Techron 9100 Series
AE Techron 9100 Series High-Current Power Amplifiers

Key Features:
- Power output up to 5 kW continuous (4.2 kW for 9105 model)
- Wide bandwidth: DC to 250 kHz
- Voltage output up to 200 Vp
- Current output from 50A to 150A peak
- Fast 7 µs rise/fall time for surges and dropouts
- Slew rate up to 150 V/µs
- Four-quadrant operation (source and sink)
- Stable with highly capacitive loads
- Works from single-phase AC mains (100–250 VAC)
- Ideal for automotive, aviation, and EMC conducted immunity testing
Learn More
Quick View
AE Techron AE Techron RLY Amplifiers
AE Techron RLY Amplifiers – Precision Power for Relay Testing

Key Features:
- Designed for rigorous power utility industry testing
- Peak currents up to 200 amperes for challenging applications
- Wide bandwidth: DC–10 kHz (current) and DC–100 kHz (voltage)
- Low distortion and minimal phase error for accurate results
- Suitable for power grid modeling and relay verification
- Four-quadrant operation for enhanced versatility
- Multiple models for varied voltage and current requirements
Learn More
Quick View
AE Techron Aetec 7794 Amplifier
Aetec 7794 High Current Industrial Amplifier

Key Features:
- Up to 200 Ap / 100 Vp; DC to 150 kHz bandwidth
- Stable with resistive, inductive, or capacitive loads
- Controlled-voltage or controlled-current operation
- Switchable rail supply for optimized load impedance
- 60A continuous output at 13.8V DC
- ±95V DC and >35 V/µs slew rate
- Four-quadrant operation: sourcing and sinking
- Extensive protection against overvoltage, overcurrent, overtemperature
- Rack-mountable chassis with LCD fault diagnostics
Learn More
Quick View
AE Techron AETechron 7796 Amplifier
AETechron 7796 Amplifier – High-Current, Low-Impedance Industrial Power
Ideal for precision testing, EMC simulations, and MRI systems.

Key Features:
- Delivers over 200 Ap peak current, up to ±180V
- DC to 100 kHz bandwidth for versatile signal reproduction
- Four-quadrant operation (source/sink modes)
- Operates in both voltage and current-controlled modes
- Handles in-rush currents up to 200A
- Field-configurable rail supply modes for load optimization
- Advanced protection against voltage, current, and thermal faults
- Stackable for higher voltage or current (up to 800 Ap)
Learn More
Quick View
Exodus Advanced Communications Broadband RF Amplifiers
Broadband RF Amplifiers from Exodus Advanced Communications deliver powerful and reliable signal amplification across a wide frequency spectrum. Designed for demanding RF environments, these solid state power amplifiers provide excellent gain stability, wide bandwidth coverage, and scalable output power. With support for advanced semiconductor technologies and flexible system formats, these broadband RF amplifiers are ideal for defense electronics, RF communications, radar systems, and EMC testing platforms.

Key Features
- Wide frequency coverage from 1 MHz to 18 GHz
- Solid state power amplifier architecture for reliable RF performance
- Output power scalable up to 300 W for modules and 1300 W for systems
- Advanced semiconductor technologies including LDMOS, GaN, and GaAsFET
- Continuous wave and linearized amplifier designs for signal accuracy
- High gain stability for consistent RF signal amplification
- Octave and decade bandwidth capability for flexible RF applications
- Rugged components designed for demanding environments
- Available in benchtop, rackmount, and modular configurations
- Suitable for radar systems, RF immunity testing, and communication platforms
Learn More
Quick View
FormFactor Beaverton Inc Cascade Autonomous DC
Cascade Autonomous DC delivers fully automated DC wafer probing with unmatched precision and efficiency powered by Contact Intelligence™.

Key Features:
- Autonomous DC wafer probing with hands-free 24/7 operation
- Contact Intelligence™ technology for dynamic probe correction and reliable pad placement
- High throughput with up to 4x faster flicker noise thermal testing on pads as small as 30 µm
- Unattended operation for overnight or weekend testing without user intervention
- Automatic probe alignment compensating for thermal drift to reduce soak time
- Flexible probe layouts supporting single DUT and multi-DUT configurations
- Ease of use – start testing with just one button, ideal for operators at all levels
Learn More
Quick View
FormFactor Beaverton Inc Cascade Autonomous RF
Cascade Autonomous RF delivers fully automated RF and mm-wave wafer probing with Contact Intelligence™ for unmatched accuracy and efficiency.

Key Features:
- Autonomous RF wafer probing with hands-free 24/7 operation
- Contact Intelligence™ for on-the-fly probe correction and pad placement
- Automatic calibration up to 500 GHz with WinCal XE software
- Calibration drift monitoring with auto re-calibration when needed
- Reduced soak time through dynamic probe re-alignment across temperatures
- Unattended operation for continuous overnight and weekend testing
- Supports 200 mm and 300 mm probe stations including CM300xi, SUMMIT200, Summit 12000, and Elite 300
- Simplified one-button operation, suitable for operators at all levels
Learn More
Quick View
FormFactor Beaverton Inc Cascade Autonomous Silicon Photonics
Cascade Autonomous Silicon Photonics delivers fully automated wafer and die-level photonics probing with Contact Intelligence™ for unmatched accuracy.

Key Features:
- Flexible vertical and edge coupling with single fibers or fiber arrays
- OptoVue™ technology for real-time in-situ calibrations
- Exclusive TopHat environment for dark, frost-free thermal testing (-40°C to +125°C)
- Sub-micron placement accuracy with Z displacement sensing
- Collision avoidance technology for safe fiber alignment
- SiPh-Tools software for automated alignment, calibration, and data management
- Partnership with Keysight and PI for seamless instrumentation and precision positioning
- Available on CM300xi-SiPh and SUMMIT200 probe stations
Learn More
Quick View
FormFactor Beaverton Inc Cascade CM300xi probe system
Cascade CM300xi – 300 mm Semi-/Fully-Automated Probe System

Key Features:
- Supports DC, AC, RF/microwave, WLR, FA, and design debug applications
- Wide thermal range from -60°C to +300°C with IceShield or TopHat compatibility
- Reliable, repeatable probe contact in a moisture-free, EMI-shielded environment
- Contact Intelligence™ technology for autonomous alignment and accurate measurements
- Modular design with upgrade paths for semi- or fully-automated configurations
- Handles up to 50 wafers with SEMI-standard cassette automation
- Fast transition times with MicroVac™ and FemtoGuard™ low-noise technologies
- Intuitive Velox software and Velox Dash™ touchscreen interface for simplified operation
Learn More

Products

Key Features:

Key Features:

Key Features:

Key Features:

Key Features:

Key Features:

Key Features:

Key Features:

Key Features:

Key Features:

Key Features:

Key Features

Key Features:

Key Features:

Key Features:

Key Features: