Test and Measurement Products

Quick View
AE Techron 3110A Standards Waveform Generator
The 3110A Standards Waveform Generator is a feature-rich, intuitive tool for engineers conducting EMC testing. From automotive to aviation applications, this unit simplifies the most complex test routines.

Key Features:
- 3,400+ Built-In Tests for automotive and industry standards
- Fast Rise Time: 3 µs full-scale with up to 1 MHz bandwidth
- Segment-Based Waveform Creation for custom sequences
- Free Lifetime Standards Updates
- Automated Triggering via GPIO or LAN
- Flexible Output Control including frequency, amplitude, and DC offset
- Extremely Precise Resolution: 0.01 Hz frequency, 76 µV amplitude
- Supports All Common Waveforms: Sine, square, triangle, DC, ripple, and more
Learn More
Quick View
AE Techron 7224 Linear Amplifier
The 7224 Linear Amplifier delivers power, speed, and precision in a compact 2U form factor. Designed for lab, test, and simulation environments, it provides outstanding performance for demanding applications.

Key Features:
- Up to 900W RMS output power
- Operates in controlled-current or controlled-voltage mode
- Field-configurable for low or high impedance loads
- DC to 1 MHz small signal bandwidth
- Produces up to 50A current or 158V peak
- Slew rate of 90 V/μs for sharp waveform reproduction
- Over-voltage, over-current, and over-temp protection circuits
- Compact 2U rack-mount or benchtop design
- Suitable for Helmholtz coil drivers, MRI/NMR, SMPS component testing
Learn More
Quick View
AE Techron 7548 Linear Amplifier
The 7548 Linear Amplifier is a high-output, low-noise solution engineered for precision and reliability in demanding environments.

Key Features:
- Up to 100 Ap / 195 Vp output
- Delivers 12,000W peak power for 40 ms
- Supports continuous 5,500W output into 1Ω load
- Operates from DC to 100 kHz bandwidth
- Field-selectable current or voltage mode
- Ideal for MIL-STD-704F three-phase testing
- Stackable for 800 Vp or 170 Ap system output
- Built-in protection against over-voltage, over-temp, and overload
- Intuitive LCD display and status indicators
Learn More
Quick View
AE Techron 7796HC Linear Power Amplifier
7796HC Linear Power Amplifier – High Current DC & AC Precision

Key Features:
- Output up to 85A continuous, 200A in-rush current
- Frequency response: DC to 100+ kHz
- Four-quadrant operation: source and sink
- Field-selectable voltage or current modes
- Stable with resistive, inductive, and capacitive loads
- Multiple protections: Over/under voltage, current, and temperature
- Supports DC ripple, surge, dropout, and ground noise simulations
- Ideal for high-current DC Conducted Immunity testing
- LCD with real-time voltage and current metrics
- Supports both balanced and unbalanced inputs
Learn More
Quick View
AE Techron 7800 Series Linear Amplifiers
7800 Series Linear Amplifiers are high-power, high-precision AC/DC amplifiers designed for demanding industrial and research applications.

Key Features:
- Power Output: Up to 20 kW continuous, 40 kW short-term
- Voltage: Up to ±500 Vp
- Current: Up to 800 A peak
- Bandwidth: DC to 60 kHz
- Four-quadrant operation: Source and Sink
- Modes: Selectable voltage or current control
- Protection: Overload, over-temp, short-circuit, and voltage fluctuations
- Ideal for: Resistive, inductive, and capacitive loads
- Low distortion: <0.25% THD
- High accuracy: DC drift < ±400 µV
Learn More
Quick View
AE Techron 8300 Series Power Amplifiers
8300 Series Power Amplifiers combine the precision of linear amplifiers with the efficiency of switch-mode technology for high-performance power delivery.

Key Features:
- Output Power: 2 kW to 10 kW (up to 50 kVA surge)
- Voltage Range: 0–140 VRMS / ±200 VDC
- Current: Up to 425A continuous, 65–300 ARMS
- Bandwidth: DC to 50 kHz
- Slew Rate: Up to 60 V/µs
- Ultra-low THD: <0.2%
- Operates in AC, DC, or AC+DC modes
- Flexible configuration: gain, current limit, impedance, and more
- Ideal for reactive, resistive, and complex loads
Learn More
Quick View
AE Techron AE Techron 8700 Series
AE Techron 8700 Series High-Frequency Power Amplifier

Key Features:
- Power output from 4 kW to 24 kW (up to 120 kVA)
- Voltage range up to ±400 Vp / 350 VDC
- Current output up to 360 ARMS continuous
- Wide bandwidth: DC to 250 kHz
- High slew rate: up to 300 V/µs
- Switch-mode efficiency with linear performance
- Scalable for both bench and rack applications
- Drives reactive and resistive loads with no power loss
- THD less than 0.8% with ultra-low noise floor
- Ideal for EMC, MIL-PRF, ISO 61000, and automotive testing
Learn More
Quick View
AE Techron AE Techron 9100 Series
AE Techron 9100 Series High-Current Power Amplifiers

Key Features:
- Power output up to 5 kW continuous (4.2 kW for 9105 model)
- Wide bandwidth: DC to 250 kHz
- Voltage output up to 200 Vp
- Current output from 50A to 150A peak
- Fast 7 µs rise/fall time for surges and dropouts
- Slew rate up to 150 V/µs
- Four-quadrant operation (source and sink)
- Stable with highly capacitive loads
- Works from single-phase AC mains (100–250 VAC)
- Ideal for automotive, aviation, and EMC conducted immunity testing
Learn More
Quick View
AE Techron AE Techron RLY Amplifiers
AE Techron RLY Amplifiers – Precision Power for Relay Testing

Key Features:
- Designed for rigorous power utility industry testing
- Peak currents up to 200 amperes for challenging applications
- Wide bandwidth: DC–10 kHz (current) and DC–100 kHz (voltage)
- Low distortion and minimal phase error for accurate results
- Suitable for power grid modeling and relay verification
- Four-quadrant operation for enhanced versatility
- Multiple models for varied voltage and current requirements
Learn More
Quick View
AE Techron Aetec 7794 Amplifier
Aetec 7794 High Current Industrial Amplifier

Key Features:
- Up to 200 Ap / 100 Vp; DC to 150 kHz bandwidth
- Stable with resistive, inductive, or capacitive loads
- Controlled-voltage or controlled-current operation
- Switchable rail supply for optimized load impedance
- 60A continuous output at 13.8V DC
- ±95V DC and >35 V/µs slew rate
- Four-quadrant operation: sourcing and sinking
- Extensive protection against overvoltage, overcurrent, overtemperature
- Rack-mountable chassis with LCD fault diagnostics
Learn More
Quick View
AE Techron AETechron 7796 Amplifier
AETechron 7796 Amplifier – High-Current, Low-Impedance Industrial Power
Ideal for precision testing, EMC simulations, and MRI systems.

Key Features:
- Delivers over 200 Ap peak current, up to ±180V
- DC to 100 kHz bandwidth for versatile signal reproduction
- Four-quadrant operation (source/sink modes)
- Operates in both voltage and current-controlled modes
- Handles in-rush currents up to 200A
- Field-configurable rail supply modes for load optimization
- Advanced protection against voltage, current, and thermal faults
- Stackable for higher voltage or current (up to 800 Ap)
Learn More
Quick View
inTEST Thermal Solutions Bio-Freezers
Bio-Freezers are high-performance laboratory freezers designed for safe storage of pharmaceuticals, vaccines, and biological samples. Built with advanced temperature control and forced-air circulation, they ensure stability and reliability in demanding lab environments.

Key Features
- Temperature range: -10°C to -30°C with 0.1°C increments
- Forced-air circulation for uniform cooling
- Large LED display and multiple sensors for accurate monitoring
- Auto defrost function for consistent performance in high humidity
- 60mm thick insulation for superior temperature stability
- Safety door lock and password protection to prevent unauthorized access
- CFC-free/HCFC refrigerant for eco-friendly operation
- Inner lighting for easy viewing of contents
- Available in multiple sizes: 23, 39, and 47 CuFt
Learn More
Quick View
inTEST Thermal Solutions Cannabis Extraction Chillers
Cannabis Extraction Chillers are engineered for precise cooling of ethanol, alcohol, and hydrocarbon solvents used in CBD and THC extraction. Designed for speed and reliability, these systems enhance extraction efficiency and throughput.

Key Features
- Cooling capability down to -80°C and below
- High cooling capacity up to 20kW at ultra-low temperatures
- Supports ethanol, alcohol, and hydrocarbon extraction
- Cryogenic and compressor-based system options
- Fast pull-down times for improved processing speed
- Compact footprint for easy integration
- Programmable touchscreen control with remote access
- Suitable for both large-scale and small-batch operations
- Built for high reliability with global support
Learn More
Quick View
AE Techron CIS-25 Test Kit
The CIS-25 Test Kit by AE Techron is an all-in-one solution for aviation conducted and induced susceptibility testing. Designed to meet rigorous standards like DO-160 Sections 16, 18, and 19, this kit includes everything needed to perform accurate, repeatable EMC tests with minimal setup.

Key Features:
- Meets Multiple Standards: DO-160 Sections 16 (up to 24VDC), 18, 19, MIL STD 461, Airbus ABD0100.1.8
- Complete Test Kit: Includes DSR 100-25 power system, three coupling transformers, and chattering relay
- 4x Power Surge Capability: Ideal for in-rush testing (up to 200 ms)
- Built-In Standards Library: 3110A library for additional EMC tests
- Expert Guidance Included: Two hours of consulting from EMC specialist Patrick G. Andre
- Secure & Durable: Comes with a lockable storage cabinet and all necessary accessories
Learn More
Quick View
inTEST Thermal Solutions Custom OEM Chillers
Custom OEM Chillers are designed to meet the exact cooling requirements of manufacturers and end users. Engineered for precision and flexibility, these systems deliver reliable performance tailored to your unique process needs.

Key Features
- Fully customized cooling solutions for OEM and end users
- Designed for specific temperature, flow rate, and pressure needs
- Supports fluid, gas, and cryogenic cooling technologies
- Flexible footprint and system integration options
- Advanced remote communication capabilities
- Suitable for a wide range of industries
- High performance and reliability in demanding environments
- Scalable solutions with OEM and volume pricing options
- Built with decades of thermal engineering expertise
Learn More
Quick View
inTEST Thermal Solutions Custom Thermal Chambers
Custom Thermal Chambers are engineered to meet exact testing requirements for end users and OEM applications. Designed for flexibility and precision, these chambers deliver extreme temperature control with fully customizable configurations.

Key Features
- Temperature range from -185°C to +500°C
- Rapid transition rates up to 100°C per minute
- Fully customizable chamber size and footprint
- Flexible test access with ports, shelves, and windows
- Advanced controller with data logging capabilities
- Multiple communication interfaces including Ethernet and RS232
- Available in benchtop, rack mount, or stand configurations
- Certified with ISO, RoHS, CE, and UL standards
- Engineered specifically for your application needs
Learn More

Products

Key Features:

Key Features:

Key Features:

Key Features:

Key Features:

Key Features:

Key Features:

Key Features:

Key Features:

Key Features:

Key Features:

Key Features

Key Features

Key Features:

Key Features

Key Features