Products

• 12GHz RF analog signal generator
• AM, FM, PM, Sweep & Pulse Modulation
• Exceptionally Low Phase Noise of -145dBc/Hz @100MHz and 10@kHz offset
• Field ready, with 10” touch screen suited for day and night use and 2 hour battery operation
• Remotely programmable via MATLAB, Python, LabVIEW and other software programming environments.
• Removable uSD card for instrument security

• 6GHz RF analog signal generator
• AM, FM, PM, Sweep & Pulse Modulation
• Exceptionally Low Phase Noise of -145dBc/Hz @100MHz and 10@kHz offset
• Field ready, with 10” touch screen suited for day and night use and 2 hour battery operation
• Remotely programmable via MATLAB, Python, LabVIEW and other software programming environments.
• Removable uSD card for instrument security

• 16K Video Generator & Analyzer
• Dolby Vision™, HDR 10 and HDR 10+
• validating DP 1.4a & DP 2.0 Link Layer on DP Sinks and Sources
• Power Input +12 Vdc (AC/DC converter included)
• Module Size/Weight TBD for Weight and Size

• Compact sized DisplayPort™ 1.2 compliant Reference Sink
• HBR2 and MST capable Sink and Branch device
• Cerified as the platform for DP 1.2 LL CTS Ext1 tests
• Optional MST Debug panel and AUX Channel Monitor
• Debug and Test Controller GUI enables monitoring and previewing any MST stream
• User programmable EDID and DPCD

•  HDMI 2.1 Test Equipment (FRL)
• Enhanced Gaming Features (VRR, ALLM)
• FEC, Forward Error Correction
• HDCP 2.2 & HDCP 2.3 support  TMDS Support
• Dolby Vision™ Test Tool
• 8K@60 fps Support (12 Gbps/channel)
• eARC Support (end of 2019)
• DSC Support (ESTIMATED 2020)
• UCD Console GUI for debugging
• High level API for easy integreation

• Automated tests for USB-C™ DisplayPort™ Alt Mode
• Electrical Test to verify whole USB-C connector with single cable insert
• Test USB 2.0 and USB 3.0
• 4K@60 support
• Easily set test parameters with provided Software
• Easily run tests from the commandline
• Unigraf’s Test System Interface (TSI) Support
• Third Part Test Management Software
• Support e.g. NI TestStand Support

• UHD / 4K compliant test equipment
• HDMI 2.0 and DP 1.2 input and output in one unit
• DCP Approved HDCP 2.3 CTS Test Tool
• HDCP 1.3 and HDCP 2.3 support
• Sink and source video, audio and configuration parameters
• USB 3.0 connected
• UCD Console GUI for debugging
• High level API for easy integration

• Test DP over USB-C video and audio
• Test USB-C Power Delivery with DP Alt Mode
• DCP Apporved HDCP 2.3 CTS Tests
• Verify interface signal continuity
• 4K@60 support
• HDCP 1.3 and HDCP 2.3 support
• Capture video and audio, monitor and control interface parameters
• USB signal pass-thru
• UCD Console GUI for debugging
• High level API for easy integration

• VESA Certified DP 1.4 Link Layer CTS Test Tool
• DCP Approved HDCP 2.3 CTS Tool
• 8K and 4K Reference Sink, Source & Repeater
• DP 1.4 / HBR3 input and output in one unit
• USB-C input and output with supplied converter cable
• MST support (4 streams)
• DSC Sink, FEC and LTTPR support
• HDCP 1.3 and HDCP 2.3 support
• High level API for easy integration

USB-C DisplayPort Alt Mode Test Unit DP 1.4a, HBR3 & PD 3.0

• 8K and 4K Reference Sink & Source
• DP 1.4a Link Layer CTS for Sinks & Sources
• HDCP 2.3 CTS for Transmitters & Receivers
• DP 1.4a features:
  * Up to HBR3 simultaneous input and output in one unit
  * DSC Sink & Source with off-line encoding and decoding
  * FEC and LTTPR support
  * MST support (4 streams)
• USB-C v1.3 with Power Delivery 3.0
  * DP Alt Mode
  * Capable to sink & source 9V@3A
  * PD Role swaps supported
• USB3.2Gen2 (10Gbit/s) bypass between test interfaces
• HDCP 1.3 and HDCP 2.3 support

Positional current probe,  PCB track Touch & Measure

Unique technology enabling current measurement in PCB tracks bandwidth of DC to 5MHz, dynamic range of 10mA to 20A pk-pk useable with any normal oscilloscope, safety rated to 300V Cat II,  investigates waveforms in any conductor including ground planes.

Bench/System DC Power Supplies, PowerFlex or PowerFlex+ regulated Single or Dual Outputs 1200 watts, with/without Digital Remote Interfaces

• Single or dual outputs, 1200 watts total
• PowerFlex design gives variable voltage/current combinations within a power envelope
• Up to 60 volts or 80 volts and up to 50 amps
• Setting by direct numeric entry or by spin wheel
• High setting resolution of 1mV in up to 60 volts
• Low noise of < 3mV rms at full power
• Bench or rack mounting, front and rear terminals
• Quasi analogue remote control
• RS232, USB GPIB & LAN interfaces (P models)

Bench/System DC Power Supply, PowerFlex Regulation, Smart Analog Controls Single or Dual Outputs, 360 to 840 watts, with/without Remote Interfaces

• PowerFlex design gives variable voltage and current combinations within a maximum power range
• Up to 60 volts and up to 20 amps
• 180 watts or 420 watts maximum per output
• Isolated outputs can be wired in series or parallel
• Constant voltage or constant current operation
• Settings Locking (S-Lock)
• PowerFlex or fixed-range operation
• Variable OVP trips
• Selectable remote sense terminals
• Compact quarter or half rack 3U case size
• Isolated analogue remote control (CPX400SA only)
• RS232, USB, GPIB & LXI compliant LAN (P models only)

Bench/System DC Power Supply, Multi-Range, Digital Control Triple Outputs, 315 or 378W with/without Remote Interfaces

• Three high performance outputs each with full functionality
• Range switching gives variable voltage/current combinations
• Shared power mode provides double power from a single output
• Low output noise and ripple via linear final regulation
• High setting resolution of up to 1mV and 0.1mA
• Variable OVP and OCP trips on all outputs
• 50 setting memories per output plus 50 linked memories
• Selectable voltage tracking (isolated tracking)
• Selectable current meter averaging
• Switchable remote sense capability
• Graphic LCD provides simultaneous output metering
• Numeric or spin-wheel control of all parameters
• Individual or combined output on/off control with
• programmable delay sequencing.
• 3U half-rack case for bench or rack mounting
• GPIB, RS-232, USB and LAN (LXI) interfaces (-P models)
• Duplicate power & sense terminals at rear (-P models)

MX100T and MX100TP:

• 315 watts total power
• Three outputs of equal power, each capable of 35V at 3A
• Range switching provides up to 70 volts and up to 6 amps

MX180T and MX180TP:

• 375 watts plus of total power
• Two high power outputs plus one low power output
• High power outputs each capable of 30 volts at 6 amps
• Range switching provides up to 120 volts or up to 20 amps
• Low power output provides up to 12 volts or up to 3 amps

Bench/System DC Power Supply, Single Output, Mixed-mode Regulation up to 360 watts, with/without remote interfaces

• Compact & lightweight power supply
• 0 to 18V at 0 to 20A or 0 to 35V at 0 to 10A
• Bench or rack mounting, front & rear terminals
• Very low noise, excellent transient response
• Comprehensive protection including OVP trip
• High setting resolution, remote sense terminals
• Analogue controls

P versions add:

• RS-232 and GPIB interfaces as standard
• Keyboard setting of all parameters
• Rotary and delta (step) control of V and I
• Watts display, non-volatile storage of 25 settings
• Fully programmable with bus readback of V & I

Bench/System High Precision DC Power Supply, Linear Regulation, Digital Control Single or Triple Outputs, 105 to 242 watts, with/without Remote Interfaces

• Advanced dc power supplies, single or triple output
• Up to 112 watts per output
• Very high precision, very low noise, excellent dynamics
• Advanced user interface with numeric and rotary control
• Multiple voltage/current ranges for increased flexibility
• Multiple non-volatile memories for power supply set-ups
• Switchable remote sense provides perfect load regulation
• Comprehensive protection including OVP and OCP trips
• Compact bench footprint; modular width for rack mounting
• Auxiliary output fully variable 1.00V to 6.00V at 3A with selectable voltage and current metering (T models)
• Bus programmable via USB, RS232, GPIB or LAN (P models)
• LAN interface is LXI compliant
• Duplicate power and sense terminals at rear (P models)