Products

The ECO-710E/810E ThermoStream® systems are eco-friendly temperature forcing solutions designed for precise electronic testing, delivering fast temperature transitions with quiet, energy-efficient operation.

Key Features:

• Wide temperature range: -80°C to +225°C
• Eco-friendly design compliant with EU 517/2014 (no annual leak testing)
• Quiet operation at just 56 dBA
• Energy-efficient performance on a 20-amp circuit
• Rapid temperature transitions for consistent results
• Touchscreen controls with embedded software (no Windows® OS)
• No need for LN2 or LCO2 cooling agents
• Remote setup and communication capabilities
• Ideal for 24/7/365 lab or production use

RapidTemp™ BT28 ThermoStream® Benchtop Thermal Test System

Key Features:

• Compact and lightweight design under 80 lbs (38 kg) for easy benchtop integration
• Wide temperature range from -28°C to +225°C for versatile testing
• High airflow capacity of 14 scfm for precise and reliable temperature forcing
• SwiftTherm™ technology for ultra-fast temperature transitions
• Detachable 9 ft. touchscreen interface for flexible operation
• ECO-Stream design: quieter, smaller, and energy-efficient
• Embedded control system with Ethernet, IEEE-488, RS232, and USB connectivity
• Customizable test setups with data logging via USB storage

Key Features:

• Wide temperature range from -65°C to +300°C
• Compatible with 150mm, 200mm, and 300mm wafer sizes
• Options for mechanical refrigeration, glycol/water, or air cooling
• Heating methods: ThermoElectric or Resistive, depending on model
• Retrofits available for existing probe stations
• Customizable surface plating: gold or nickel
• Supports advanced applications like low leakage probing (fA level) and high-voltage probing (up to 10kV)

ThermoSpot Systems – Benchtop Direct Contact Cooling and Heating Solution

The Temptronic® ThermoSpot® delivers high-performance temperature control for IC testing and high-Watt devices with unmatched cooling capacity.

Key Features:

• Reliable thermal cycling without thermoelectric modules
• Wide temperature range: -65°C to +175°C
• Cooling power: 40W at -40°C, 55W at -55°C, 120W at -40°C
• Fast transitions: <35 seconds from +25°C to -40°C
• Secure thermal contact with ThermoBridge™ design
• Touch-screen with data logging and programmable settings
• Multiple communication ports: Ethernet, USB, IEEE, RS232

ThermoSpot® Systems – Direct Contact Thermal Test Solutions

Key Features:

• Temperature range: -65°C to +175°C
• Cooling power up to 120W at -40°C
• Fast transition rate (<35 sec from +25°C to -40°C)
• Reliable thermal cycling without thermoelectric modules
• Flexible thermal probe with interchangeable ThermoBridge™
• Touchscreen controller with programmable profiles
• Connectivity options: Ethernet, USB, IEEE, RS232
• Easy, secure connection to in-circuit or socketed DUTs

The EMI 64k software allows to embed the TDEMI systems in a fully automated test environment.

• Full automation of EMI testing according to all commercial and military standards
• Automated control of turntable, antenna and other equipment
• Height and Angular Scan
• Procedures according to standards as well as customized procedures
• Reducing the cost for EMC and communication testing and certification by tailored packages

The measurement system for all emission measurments in the frequency range 1 Hz – 44 GHz.

• Frequency Range  1 Hz – 30MHz, 1GHz, 3GHz, 6GHz, 9GHz, 18GHz, 26GHz, 40 GHz and 44GHz
• 225 MHz Real-time Analysis Bandwidth
• Weighted Real-time Spectrogram up to 44 GHz
• CISPR Bandwidths 200 Hz, 9 kHz, 120 kHz, 1 MHz
• MIL/DO Bandwidths 10 Hz, 100 Hz, 1 kHz, 10 kHz, 100 kHz, 1 MHz

The measurement system for all emission measurments in the frequency range 1 Hz – 44 GHz.

• Full compliance EMI Reciever according to standard CISPR 16-1· 1, ANSI C63.2, MIL->461, and DO·160
• Spectrum Analyzer
• Integrated LOW Noise Ampllfier (lNAI)
• Integrated Preselect1on
• Tradttional and FFT·based Mode
• Automatic Stepped Attenuator
• Ultra Low Noise Floor
• Excellent spurious Performance
• Real-time Spectrum Analyzer optional
• Vast IQ-Bandwidth

TDEMI Mobile+. The ultra mobile EMI receiver – Emission measurements everytime, everywhere. Fully stand-alone operable.

• Frequency Ranges 10Hz – 1GHz, 3GHz, 6GHz or 7GHz
• 16000x faster than conventional receivers
• Super compact design and 12V supply
• 225 MHz fully gapless real-time analysis bandwidth
• Weighted Real-time Spectrogram

Ultra High Performance RT Spectrum Analyzer. Ultrafast EMI Measurements.

• Frequency Range from 1 Hz up to 50 GHz
• 225 MHz Real-time analysis bandwidth
• 100 dB Dynamic Range
• Ultrahigh performance preselection in all modes
• Up to 510 MHz Real-time IQ-Analysis bandwidth
• Ultra High Performance Spectrum Analyzer

• High Power: Ranging from  750W to 15kW.
• User-Friendly: Easy connections via LAN (LXI 1.5), USB (2.0), RS-232/RS-485.
• Safe & Certified: CE/UKCA marked with built-in safety.
• Versatile: Ideal for various industries.
• Warranty: 5 years.

• Optional Interfaces: IEEE, EtherCAT, Modbus-TCP, Isolated Analog 4-20mA (IS420)
• Output Power Levels: 1kW to 15kW, low-noise performance
• Output Voltage/Current: Up to 1500V and 1500A
• AC Input Options: Single-phase and three-phase with Active Power Factor Correction
• Mechanical Options: Blank Front Panel, Air Filter Kits, Parallel Kits
• Certifications: CE/UKCA Marked, UL/cUL/IEC/EN 61010-1
• Warranty: 5 years

• High power density, lightweight, and portable
• Output power: 30kW, 45kW, 60kW; Output voltages: 10V to 600V
• Advanced features: Programmable V/I Slew-Rate, Constant-Power Limit, Arbitrary Waveform Generator
• Built-in interfaces: LAN (LXI 1.5), USB (2.0), RS-232/RS-485, Isolated Analog (5V/10V)
• Optional interfaces: IEEE, EtherCAT, Modbus-TCP, Isolated Analog 4-20mA
• CE and UKCA marked, worldwide safety approvals, 5-year warranty

• Compact, air-cooled OEM style
• Superior pulse repeatability
• Simple parallel operation for higher power
• Optional Active PFC (pf = 0.98)
• Full remote control interface
• High EMI-RFI immunity

• Advanced semiconductor technology
• High-quality construction
• Rapid capacitor and pulse-forming network charging
• Compact and lightweight design
• Simple parallel operation for higher power needs
• Compatible with worldwide input voltages and frequencies
• Fully adjustable output voltage
• Comprehensive remote control interface

• High-Speed Current Control: No dynamic overshoot or oscillation
• High Slew-Rate: Up to 30A/*s for fast load changes
• Low Voltage Operation: Stable operation with no turn-on delay
• Multi-Functional: Seven load modes and four operating modes
• Parallel Operation: Up to 10kW with 10 units
• User-Friendly Interface: Built-in USB and optional IEEE interfaces
• Compliance: EN61010-1 compliant with a two-year warranty