Products

The QDS Quench Detection System is a 4-channel precision device designed for fast and reliable superconducting magnet protection. Each channel supports independent multi-range measurement, floating up to 100 V, and provides high-resolution data for both absolute and differential quench detection. Configurable detection windows from 1 ms to 1 s and Ethernet connectivity allow seamless control and integration with magnet power systems. Ideal for laboratories and industrial applications requiring high-accuracy magnet monitoring.

Key Features

• 4 independent floating channels up to 100 V
• Multi-tap precision measurement: ±20 V to ±20 mV ranges
• Ultra-high resolution: 2.4 μV to 2.5 nV
• Configurable detection windows from 1 ms to 1 s
• Absolute and differential quench detection modes
• 24-bit resolution and 100-kHz sampling rate per channel
• Fast 10/100/1000 Mbit Ethernet connectivity (TCP-IP/UDP)
• Interlock and output status signals for system integration
• Persistent Switch driver outputs: 12 V and 24 V
• Remote firmware updates via CAEN ELS website

The REGUL8OR Power Controller is a high performance programmable power supply controller designed to transform standard power converters into advanced digitally controlled power systems. Equipped with a built in web server, waveform generation tools and a multi channel oscilloscope, it enables precise monitoring and control of voltage and current in demanding laboratory and industrial environments. Supporting voltage up to ±200 V and current measurements up to 1000 A with 0 FLUCS DCCT technology, this controller provides exceptional accuracy, stability and flexibility.

Key Features

• Digital programmable power supply controller with advanced FPGA based control
• Supports voltage up to ±200 V and current measurement up to 1000 A
• Integrated 0 FLUCS current transducer technology for high precision sensing
• Embedded web server for configuration and monitoring
• Built in Arbitrary Waveform Generator for custom signal generation
• Integrated four channel oscilloscope for real time measurement
• Gigabit Ethernet connectivity with TCP IP and UDP communication
• Fanless design for quiet and reliable operation
• Compatible with multiple programmable power supplies and amplifiers
• High resolution waveform monitoring at 100 ksps per channel

The TetrAMM is a high precision 4-channel picoammeter engineered for fast and reliable low current measurements in advanced research and detector applications. Designed for demanding laboratory and beamline environments, the system delivers simultaneous 24-bit sampling at speeds up to 100 kHz per channel. Its integrated bias voltage source, high speed Ethernet connectivity, and real time onboard processing make it an ideal solution for applications requiring accurate multi channel current monitoring and detector biasing.

Key Features

• 4 channel simultaneous current measurement
• 24 bit ADC resolution for precise low current detection
• Sampling rate up to 100 kHz per channel
• Integrated low noise bias voltage source
• Bipolar current measurement capability
• Gigabit Ethernet interface with TCP/IP and UDP support
• SFP link for high throughput data acquisition
• Configurable sampling frequency and auto ranging functionality
• Trigger output with configurable threshold detection
• Real time FPGA based onboard data processing
• Compact and robust instrument design
• Plug and play oscilloscope software included

Applications:

• Aerospace & Defense – Avionics, MIL-STD-704, EMC compliance, 400Hz & wild frequency testing
• EV Charging & V2G/V2H Testing – On-board chargers, grid-tied inverters, smart grid simulation
• Energy Storage & Renewable Systems – Home ESS, solar PV/grid-tied inverter testing
• Industrial Power Simulation – Frequency conversion, harmonic analysis, transient simulations
• Smart Grid & Compliance Testing – IEC 61000, RTCA DO-160, IEEE 1547, and more

Applications

• Aerospace & Avionics – Frequency conversion (400Hz & wild frequency testing), MIL-STD compliance
• EV Charging & Power Electronics – On-board chargers (OBC), V2G/V2H testing, battery simulation
• Renewable Energy Systems – Solar PV/grid-tied inverter testing, home ESS & smart grid simulations
• Power Supply & Industrial Testing – AC/DC power supply evaluation, network server & data center testing
• Research & Development Labs – High-frequency power testing, compliance verification, transient simulations

Applications

• Aerospace & Avionics Testing – 400Hz & wild frequency (360Hz-800Hz) compliance
• EV Charging & Power Electronics – AC/DC conversion, V2G, V2H, and OBC testing
• Renewable Energy & Smart Grid – Solar PV inverters, energy storage & grid simulation
• Industrial Power & Manufacturing – AC power supply testing, production line QA
• R&D & Compliance Labs – IEC61000, MIL-STD-704, RTCA DO-160 testing
• Railway Power Systems – 16.6Hz & 400Hz frequency compliance

High-Power 4-Quadrant AC & DC Power Source with Load Option

• Powerful & Versatile: 12kVA / kW to 21kVA / kW in a 4U chassis. Parallel units up to 168kVA/kW (single cabinet)or 252kVA/kW (dual cabinet).
• Multi-Phase Flexibility: Supports single-phase, split-phase, and three-phase configurations with AC, DC, or AC+DC output.
• Grid Simulation & Compliance Testing: Emulates real-world power grid conditions, simulating disturbances, harmonics, and interharmonics for accurate renewable energy testing (solar inverters, EV charging, microgrid, and UPS applications).
• Regenerative Efficiency: Over 90% energy recovery back to the grid reduces power consumption and operational costs.
• Advanced Control & Monitoring: SmartSource Suite enables remote control via an intuitive web browser interface with LAN, USB, GPIB, and RS232 connectivity.

High-Power 4-Quadrant AC & DC Power Source

• High Power Density: Available in 30kVA/kW, 45kVA/kW, and 55kVA/kW models, with parallel cabinets scaling up to 550kVA/kW.
• Versatile Output Capability: AC, DC, or AC+DC modes in single-phase, split-phase, or three-phase configurations.
• Dual Constant Power Voltage Ranges:
  • AC Voltage: 0-240V L-N / 0-415V L-L & 0-480V L-N / 0-830V L-L
  • DC Voltage: 0-340Vdc & 0-680Vdc
• Grid Compliance Testing: Meets global standards like IEEE 1547, UL 1741, IEC 61000-3, IEC 61000-4
• Regenerative Power Efficiency: >90% energy recovery back to the grid, reducing power waste and operational costs
• PHIL Interface for Hardware-in-the-Loop (HIL) Testing: High-speed analog I/O for real-time frequency, voltage, and current control.
• SmartSource Suite for Remote Testing: Web-based real-time monitoring and control via LAN, USB, GPIB, and RS232.

4-Quadrant Programmable Load with Energy Recovery

• Powerful & Scalable: 6kVA/kW to 21kVA/kW in a compact 4U chassis. Parallel units up to 168kVA/kW per cabinet or 252kVA/kW in dual cabinets.
• Versatile Load Simulation: AC and DC load capability with single-phase, split-phase, and three-phase configurations.
• Grid-Ready Compliance Testing: Supports IEEE 1547, UL 1741, IEC 61000-3, IEC 61000-4 compliance testing.
• Energy-Efficient Regeneration: Returns over 90% of absorbed power back to the grid, reducing operational costs.
• Dynamic Load Emulation: Simulates linear and non-linear loads, harmonics, transient conditions, and waveform distortions.
• High-Speed Smart Control: SmartSource Suite for real-time test automation and remote monitoring.

High-Power AC/DC Load Simulator with PHIL Interface

• Scalable Power Density: Available in 30kVA/kW, 45kVA/kW, and 55kVA/kW models, with parallel cabinets up to 550kVA/kW.
• Versatile AC/DC Load Capability: Supports single-phase, split-phase, three-phase, and multi-channel configurations.
• Dual Constant Power Voltage Ranges:
  • AC Voltage: 5-220V L-N / 9-380V L-L & 5-440V L-N / 9-760V L-L
  • DC Voltage: 0-335Vdc & 9-650Vdc
• Advanced PHIL Interface (Option H): High-speed analog I/O for real-time frequency, voltage, and current control.
• Regenerative Power Efficiency: Returns over 90% of absorbed energy back to the grid, reducing operational costs & heat dissipation.
• Dynamic Load Simulation: Simulates harmonics, transient conditions, and waveform distortions for real-world power testing.
• SmartSource Suite for Remote Control: Web-based monitoring and test automation via LAN, USB, GPIB, and RS232.

Unleash the power of modern, versatile, and sophisticated AC sources with our LSX Series – Programmable AC Power Source. These powerhouses come in single and three-phase options, ranging from 1.5kVA to 6kVA. Equipped with an advanced programmable controller featuring a vivid colour touchscreen interface, the LSX Series is not just cost-effective but also fully programmable for basic frequency conversion, advanced AC power line disturbance tests, and ATE applications.

The AZX Series (Regenerative AC / DC Power Source) is a family of high power, single, split and three phase, AC, DC and AC+DC output capable Power Sources with full energy recovery to the AC mains when sinking power from the equipment under test. Available models range from 30 kVA to 440 kVA. Using a modern color touch screen based user interface for ease of use, the AZX Series is cost effective and fully programmable for both basic frequency conversion and advanced AC power line or DC power disturbance test applications requiring up to 1000 Hz fundamental frequency.

The energy recovery capability allows both sourcing and sinking of current and power up to 100% of rated power. Adding the Load Option (Option L) adds full electronic regenerative AC & DC Load programming capability to the AZX.