Test and Measurement Products

Quick View
Tabor Electronics Ltd. 3180 PXI Amplifier
The Tabor 3180 PXI Amplifier is a high-voltage, wideband PXI signal amplifier designed to boost your waveform generator output with precision and safety. Capable of delivering up to 180Vp-p with a 150mA output current, it supports large signal bandwidths up to 300kHz and small signal bandwidths up to 1MHz. The 3180 features selectable gain, a fast 120V/µs slew rate, and a safety latch with visual indicators to ensure secure operation. Compact and cost-effective, this PXI card integrates seamlessly into PXI test systems, providing reliable high-voltage amplification for automotive, defense, aviation, and industrial applications.

Key Features
- Single-width PXI slot design
- High-voltage output: up to 180Vp-p (±90V)
- Output current up to 150mA
- Large signal bandwidth up to 300kHz
- Small signal bandwidth up to 1MHz
- Fast slew rate: 120V/µs
- Selectable gain configuration (up to x50)
- Compatible with Tabor waveform generators
- Safety latch and visual indicator for high-voltage operations
- Compact, cost-effective PXI solution for versatile applications
Learn More
Quick View
Tabor Electronics Ltd. 3201 PXIe RF Amplifier
The Tabor 3201 PXIe RF Amplifier is a high-frequency, high-power RF amplifier designed to extend the output of PXIe-based signal sources. Operating from 100 kHz to 20 GHz, it delivers up to +30dBm power into 50Ω, making it ideal for demanding RF, multi-tone, and general electronics applications. Its compact single-slot PXIe design supports cascading for up to 25 dB gain. Equipped with reverse polarity and over/under-voltage protection, the 3201 ensures safe, reliable operation in laboratory and industrial setups.

Key Features
- PXIe single-slot form factor
- Ultra-wide bandwidth: 100 kHz to 20 GHz
- High output power: +30dBm typ. @ P1dB
- Cascade channels for up to 25 dB gain
- Reverse polarity protection
- Over/under-voltage protection
- Ideal for RF, multi-tone, and scientific applications
- Compact and cost-effective solution
- Compatible with Tabor waveform and RF signal generators
Learn More
Quick View
Tabor Electronics Ltd. 3202 PXIe RF Amplifier
The Tabor 3202 PXIe RF Amplifier is a high-power, dual-channel RF amplifier designed for PXIe systems, operating from 100 kHz to 20 GHz. It provides up to +30dBm output into 50Ω and allows channel cascading for up to 25 dB gain, making it ideal for high-frequency, multi-tone, and demanding RF applications. Equipped with reverse polarity and over/under-voltage protection, the 3202 ensures safe and reliable amplification in laboratory and industrial environments.

Key Features
- PXIe single-slot dual-channel form factor
- Ultra-wide bandwidth: 100 kHz to 20 GHz
- High output power: +30dBm typical @ P1dB
- Cascade channels for up to 25 dB gain
- Reverse polarity protection
- Over/under-voltage protection
- Ideal for RF, multi-tone, and scientific applications
- Compact and cost-effective solution
- Compatible with Tabor waveform and RF signal generators
Learn More
Quick View
Tabor Electronics Ltd. 3222 PXIBus Amplifier
The Tabor 3222 PXIBus Amplifier is a high-performance PXI-based signal amplifier designed for precise, high-voltage signal amplification. Operating from DC up to 20 MHz, it delivers up to 40Vp-p into high impedance with extremely low distortion. The 3222 supports customizable gain, input/output impedance, polarity, and floating or grounded operation, making it ideal for automotive, aviation, and general laboratory applications.

Key Features
- Single-width PXI card, 3U form factor
- Wideband range: DC to 20 MHz
- High amplitude: 40Vp-p into high impedance
- Extremely low distortion
- Fixed x10 gain, custom gain available
- Configurable input/output impedance and polarity
- Floating or grounded signal operation
- Efficient PXI power usage with +5V only draw
- Compact and cost-effective solution for PXI systems
Learn More
Quick View
HIOKI E E CORPORATION 3269 Power Supply
The Hioki 3269 Power Supply is a four-channel unit designed to provide stable power to Hioki flat bandwidth AC/DC current probes, including the 3273-50 to 3276 series, CT6700, and CT610 series. It enables accurate current measurement output for Memory HiCorders, oscilloscopes, and other data acquisition instruments.

Key Features
- Supplies power to Hioki current probes 3273-50 to 3276, CT6700, CT610 series
- Four-channel power output for multi-probe setups
- Compatible with Memory HiCorders and oscilloscopes
- Output voltage: ±12 V ±0.5 V, maximum 2.5 A (total of all channels)
- Compact and lightweight design: 80 × 119 × 200 mm, 1.1 kg
- Wide AC input range: 100–240 V AC, 50/60 Hz, 170 VA max
- Simple integration into data acquisition setups
- Note: Requires compatible current sensor to operate
Learn More
Quick View
HIOKI E E CORPORATION 3272 Power Supply
The Hioki 3272 Power Supply is a single-channel unit designed to provide stable power to Hioki 3270 Series AC/DC clamp-on probes and CT6700 series sensors. It ensures accurate current signal output for Memory HiCorders, oscilloscopes, and other general-purpose instruments.

Key Features
- Compatible with Hioki 3273-50, 3274, 3275, 3276, and CT6700 series probes
- Single-channel power supply for precise current measurement
- Supports Memory HiCorders, oscilloscopes, and recorders
- Output voltage: ±12 V ±0.5 V, 600 mA total
- Compact size: 73 × 110 × 186 mm, weight 1.1 kg
- AC input options: 100/120/220/240 V, 50/60 Hz, 20 VA max
- Comes with power cord, instruction manual, and spare fuse
- Cannot be used alone; requires compatible current probe
Learn More
Quick View
HIOKI E E CORPORATION 3273-50 Clamp Probe
The Hioki 3273-50 Clamp On Probe is a high-performance wideband current probe designed for oscilloscopes and Memory HiCorders. It captures transient and steady-state current waveforms from 10 mA to 30 A with excellent fidelity. Its advanced design allows accurate observation of low currents even near high-current lines.

Key Features
- Wideband DC to 50 MHz waveform observation
- High S/N characteristics for 10 mA order currents
- Direct BNC connection to oscilloscope or Memory HiCorder
- High-permeability magnetic shield reduces electric field interference
- Supports transient current measurement in power supplies, inverters, and motor controllers
- Paired zero-flux method and thin-film Hall elements for precise wideband measurement
- Optional Power Supply 3269/3272 for stable operation
Learn More
Quick View
HIOKI E E CORPORATION 3274 Clamp Probe
The Hioki 3274 Clamp On Probe is a high-precision wideband current sensor designed for capturing transient and steady-state currents in industrial applications. With a DC to 10 MHz bandwidth and continuous current handling up to 150 A, this probe is ideal for waveform observation with oscilloscopes and Memory HiCorders.

Key Features
- Wideband waveform observation from DC to 10 MHz
- Measures currents up to 150 A continuously
- Handles peak currents up to 500 A (short pulse)
- Direct BNC connection to oscilloscope or Memory HiCorder
- High permeability magnetic shield minimizes interference
- Ideal for inverters, motors, and power supply measurements
- Optional Power Supply 3269/3272 for continuous operation
- Compact and portable design with carrying case included
Learn More
Quick View
HIOKI E E CORPORATION 3275 Clamp Probe
The Hioki 3275 Clamp On Probe is a high-performance wideband current sensor engineered for accurate waveform capture with oscilloscopes and Memory HiCorders. Designed for environments with high-voltage switching or magnetic interference, it measures currents up to 500 A with DC to 2 MHz bandwidth.

Key Features
- Wideband waveform observation from DC to 2 MHz
- Measures currents up to 500 A continuously
- Direct BNC connection to oscilloscope or Memory HiCorder
- Electrostatic shield minimizes interference from nearby fields
- Zero-flux and Hall element detection for precise measurement
- Ideal for inverters, motors, and high-voltage switching equipment
- Optional Power Supply 3269/3272 for continuous operation
Learn More
Quick View
HIOKI E E CORPORATION 3276 Clamp Probe
The Hioki 3276 Clamp On Probe is a high-performance wideband current sensor designed for accurate waveform measurement with oscilloscopes and Memory HiCorders. It captures transient and steady-state currents from 10 mA to 30 A with high fidelity, making it ideal for advanced electronics applications.

Key Features
- Wideband waveform observation from DC to 100 MHz
- High S/N ratio for 10 mA order current measurement
- Direct BNC connection to oscilloscope or Memory HiCorder
- High-permeability magnetic shield reduces interference
- Captures transient currents in power supplies, inverters, and motor controllers
- Low insertion loss minimizes derating from sensor heating
- Compatible with optional Power Supply 3269/3272 for stable operation
Learn More
Quick View
Tabor Electronics Ltd. 3322 PCIBus Amplifier
The Tabor 3322 PCIBus Amplifier is a high-performance PCI-based signal amplifier built for precision high-voltage amplification. It operates from DC up to 20 MHz, providing up to 40Vp-p into high impedance with ultra-low distortion. The 3322 supports configurable gain, input/output impedance, polarity, and floating or grounded operation, making it ideal for automotive, aerospace, and laboratory applications.

Key Features
- Single-slot, 3U PCI card
- Wideband range: DC to 20 MHz
- High amplitude: 40Vp-p into high impedance
- Extremely low distortion
- Fixed x10 gain, customizable without signal degradation
- Configurable input/output impedance and polarity
- Floating or grounded signal operation up to 250VDC
- Efficient PCI power usage with +5V only draw
- Compact and cost-effective solution for PCI systems
Learn More
Quick View
HIOKI E E CORPORATION 3504 C HiTESTER
The Hioki 3504 C HiTESTER is a dual-band capacitance meter designed for high-speed inspection of large-capacitance MLCCs on automated taping and sorting machines. Using constant voltage testing, it ensures stable and repeatable measurements while detecting contact errors to improve production yield.

Key Features
- Dual measurement frequencies of 120 Hz and 1 kHz
- Fast measurement time of 2 ms for inline testing
- Constant voltage testing for voltage-dependent capacitance
- Continuous contact error monitoring during measurement
- BIN function for automated sorting and classification
- Advanced 4-terminal contact check on selected models
- Optimized for integration with taping machines
Learn More
Quick View
HIOKI E E CORPORATION 3506-10 C Meter
The Hioki 3506-10 C Meter is a high-speed dual-band capacitance meter designed specifically for ceramic capacitor testing on automated production lines. Built for seamless integration with taping machines and sorting systems, it delivers fast, stable, and repeatable measurements even in demanding manufacturing environments.

Key Features
- Dual measurement frequencies of 1 kHz and 1 MHz
- Ultra-fast analog test time of 0.6 ms at 1 MHz
- Stable low-capacitance measurement for MLCC production
- Enhanced noise resistance for reliable inline testing
- BIN function for efficient component screening
- Designed for integration with taping machines and sorters
- Excellent repeatability for high-volume manufacturing
Learn More
Quick View
Tabor Electronics Ltd. 5200 PXI Waveform Generator
The Tabor 5200 PXI Waveform Generator is a versatile single-channel PXI arbitrary waveform generator that combines precision, speed, and flexibility in a compact module. It supports sine waves up to 25MHz, square waves to 15MHz, and offers 14-bit vertical resolution with 1M waveform memory. Equipped with ArbConnection software, the 5200 allows fast waveform creation, editing, and sequencing, making it ideal for PXI-based test systems and advanced laboratory applications.

Key Features
- Single-channel arbitrary waveform generator with 50MS/s sample rate
- Sine output up to 25MHz, square up to 15MHz, SINE OUT to 50MHz
- 14-bit vertical resolution for high waveform fidelity
- 1M waveform memory with segmentable storage up to 4096 segments
- Supports AM, FM, Arbitrary FM, FSK, Ramped FSK, and Sweep modulation
- Sequence capability with up to 4096 segments and burst repetitions
- Ultra-fast waveform downloads using DMA
- ArbConnection software for waveform design, import, and editing
- Flexible triggering via PXI bus, front panel, or manual commands
- Multi-instrument synchronization for phase-controlled outputs
- Occupies a single PXI slot for compact system integration
Learn More
Quick View
Tabor Electronics Ltd. 5201 PXI Waveform Generator
The Tabor 5201 PXI Waveform Generator is a high-performance single-channel PXI arbitrary waveform generator, delivering precision, speed, and versatility in a compact PXI module. It produces sine waves up to 50MHz, square waves to 30MHz, and provides 14-bit resolution with 2M waveform memory. Combined with ArbConnection software, the 5201 enables rapid waveform creation, editing, sequencing, and multi-instrument synchronization, making it ideal for advanced laboratory and PXI-based testing applications.

Key Features
- Single-channel PXI arbitrary waveform generator with 125MS/s sample rate
- Sine output up to 50MHz, square waves to 30MHz, SINE OUT to 125MHz
- 14-bit vertical resolution for high waveform fidelity
- 2M waveform memory with segmentable storage for up to 4096 segments
- Supports AM, FM, Arbitrary FM, FSK, Ramped FSK, and Sweep modulation
- Sequence capability with up to 4096 waveform segments and burst repetitions
- Ultra-fast waveform downloads using DMA
- ArbConnection software for waveform design, editing, and import
- Flexible triggering via PXI bus, front panel, or manual commands
- Multi-instrument synchronization for phase-controlled outputs
- Occupies a single PXI slot for compact integration
Learn More
Quick View
Tabor Electronics Ltd. 5251 PXI Waveform Generator
The Tabor 5251 PXI Waveform Generator is a high-performance single-channel PXI waveform generator designed for versatile lab and PXI-based testing applications. With 250MS/s sample rate, 16-bit resolution, and 2M waveform memory, it produces precise sine waves up to 100MHz and square waves up to 62.5MHz. Combined with ArbConnection software, it offers fast waveform creation, sequencing, modulation, and multi-instrument synchronization, making it ideal for modern communication and research systems.

Key Features
- Single-channel PXI waveform generator with 250MS/s sample rate
- Sine waves up to 100MHz, square waves up to 62.5MHz
- 16-bit vertical resolution for high-fidelity output
- 2M waveform memory, segmentable for up to 4096 sequences
- Supports AM, FM, FSK, PSK, ASK, frequency & amplitude hopping, and sweep
- Multiple run modes: trigger, timer, and trigger delay
- Ultra-fast waveform downloads via DMA
- ArbConnection software for waveform design, import, and editing
- Multi-instrument synchronization for phase-controlled outputs
- Occupies a single PXI slot for compact system integration
Learn More

Products

Key Features

Key Features

Key Features

Key Features

Key Features

Key Features

Key Features

Key Features

Key Features

Key Features

Key Features

Key Features

Key Features

Key Features

Key Features

Key Features