Digital Oscilloscopes

HDO4000A oscilloscopes have 4 analog input channels, 12-bit resolution using Teledyne LeCroy’s HD4096 high-definition technology, up to 1 GHz of bandwidth and a compact form factor with a large 12.1” multi-touch display. They are ideal for debug and troubleshooting of power electronics designs, digital power management or power integrity analysis, automotive electronics systems, and deeply embedded or mechatronic designs.

The WaveSurfer 3000z has a 10.1″ capacitive touch display, the longest memory, and the deepest toolbox – all at an affordable price.

• HD4096 technology provides 12-bit resolution all the time
• 2ProBus input supports over 30 probes in 9 product categories
• 3Long record capture of up to 25 Mpts
• 412.1” 1280 x 800 HD capacitive touchscreen
• 5Mixed-signal capability – debug complex embedded designs with integrated 16-channel mixed signal option
• 6Easy connectivity with 2 USB 3.1 ports
• 7MAUI with OneTouch user interface for intuitive and efficient operation

• 15.6″ 1920 x 1080 capacitive touchscreen display
• 24 analog input channels
• 3ProBus input supports every Teledyne LeCroy probe
• 4MAUI with OneTouch user interface for intuitive and efficient operation
• 5Q-Scape multi-tab display architecture
• 6Up to 250 Mpts of acquisition memory
• 7HD4096 technology – 12 bits all the time
• 8Buttons/indicators color-coded to associated waveform on display
• 9Use cursors and adjust settings without opening a menu
• 10Mixed Signal capability with 16 integrated digital channels
• 116 USB 3.1 ports (2 front, 4 side)

• HD4096 technology provides 12-bit resolution up to 8 GHz and 20 GS/s
• Up to 5 Gpts of acquisition memory enables detailed viewing of long events
• 15.6” 1900 x 1080 Full HD capacitive touchscreen
• ProBus2 input supports up to 8 GHz bandwidth while maintaining support for legacy ProBus probes
• MAUI with OneTouch user interface for intuitive and efficient operation
• Waveform Control Knobs – Control channel, zoom, math and memory traces with the multiplexed vertical and horizontal knobs
• Color-coded panel indicators – Trigger, horizontal and vertical indicator colors correspond to the associated waveform on the display
• Cursor/Adjust Knobs – Enable and position cursors or adjust settings and parameters without opening a menu
• Mixed Signal Capability – Debug complex embedded designs with integrated 16-channel mixed signal capability
• Easy connectivity with seven USB 3.1 ports (3 front, 4 side) and UHD (4k) HDMI and DisplayPort outputs

• Eye diagram (a), eye mask failure (b) and IsoBER eye opening analysis (c)
• Jitter spectrum (a) with noise floor display (b) and inverse FFT of the periodic jitter (c)
• Data dependent jitter (DDj) plot for each bit in synch with pattern (a) and with histogram (b)
• Time interval error (TIE) jitter track analysis
• Jitter histograms (a) with bathtub curves (b) and CDF plot (c)
• Intersymbol interference (ISI) plots pinpoint bit sequences that have high ISI and are sources of bit errors
• Jitter measurements table with full details for one or more “lanes” plus reference

• 15.6” 1920 x 1080 capacitive touchscreen display
• 8 analog input channels
• ProBus input supports every Teledyne LeCroy probe
• MAUI with OneTouch user interface for intuitive and efficient operation
• Q-Scape multi-tab display architecture
• Up to 5 Gpts of acquisition memory
• HD4096 technology – 12 bits all the time
• Buttons/indicators color-coded to associated waveform on display
• Use cursors and adjust settings without opening a menu
• Mixed Signal capability with 16 integrated digital channels
• 6 USB 3.1 ports (2 front, 4 side)
• HDMI and DisplayPort – supports 4K (4096 x 2304) external monitor
• Removable SSD (standard)
• View 16 channels on one display with OscilloSYNC
• Reference Clock Input/Output for connecting to other equipment
• USBTMC over USB 3.1 for fast data offload

• S-parameters DC to 40 GHz, single-ended and mixed-mode
• Impedance Profile with <1 mm resolution, differential and common-mode
• Internal, automatic OSLT calibration
• USB-connected, small, lightweight
• Flexible display of the measurements
• Remove effects from fixtures, connectors and cables
• Emulate eye diagrams with CTLE, DFE and FFE equalization
• Advanced jitter analysis

• 4/8 analog channels + 1 external trigger
• Analog channel bandwidth: up to 2 Ghz; real-time sampling rate of up to 10 GSa/s
• Vertical resolution: 12-bits
• Low noise floor: 153 μVrms at full bandwidth of 2 GHz
• New generation of high speed display technology:
  • Waveform capture rates up to 170,000 wfm/s (normal mode), and 750,000 wfm/s (sequence mode)
  • Supports 256-level intensity grading and color temperature display modes
  • Memory depth up to 500 Mpts/channel
  • Digital trigger system
• Intelligent trigger: Edge, Slope, Pulse, Window, Runt, Interval, Dropout, Pattern, Qualified, Nth edge, Setup/hold, Delay and Video (HDTV supported)
• Serial bus triggering and decoder, supports protocols I2C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I2S, MIL-STD-1553B, SENT and Manchester as standard
• Segmented acquisition (Sequence) mode, dividing the maximum record length into multiple segments (up to 80,000), according to trigger conditions set by the user, with a very small dead time between segments to capture the qualifying event
• History waveform record (History) function, the maximum recorded waveform length is 80,000 frames
• Automatic measurements on 50+ parameters, supports statistics with histogram, track, trend, Gating measurement, and measurements on Math, History, Memory and Ref
• 4 Math traces (8 Mpts FFT, addition, subtraction, multiplication, division, integration, differential, square root, etc.), supports formula editor

✔ Multiple Bandwidth Options: 100 MHz, 200 MHz, and 350 MHz
✔ Fast Sampling Rate: Up to 2 GS/s (interleaved) for high-speed signal acquisition
✔ Extended Memory Depth: Up to 28 Mpts per channel for capturing intricate signal variations
✔ Serial Bus Trigger and Decode: Built-in support for I2C, SPI, UART, RS232, CAN, LIN
✔ Waveform Sequence Recorder: Capture and playback up to 80,000 recorded waveforms
✔ Advanced Triggering System: Includes Edge, Slope, Pulse Width, Window, Runt, Interval, and Pattern triggers
✔ Multi-Mode Display: Supports color temperature mapping and intensity grading for signal clarity
✔ MSO Upgrade Option: 16 digital channels available for mixed-signal debugging (on 4-channel models)
✔ Connectivity: USB, LAN, and external trigger output for remote data transfer and PC control

• Bandwidth Options: 100 MHz, 200 MHz, 350 MHz, and 500 MHz.
• Sampling Rate: Up to 2 GS/s (1 GS/s per channel in four-channel mode).
• Memory Depth: Up to 200 Mpts in interleaved mode for extended signal capture.
• High-Speed Capture: Waveform update rates of 120,000 wfm/s in standard mode and up to 500,000 wfm/s in sequence mode.
• Advanced Triggers: Edge, Slope, Pulse Width, Window, Runt, Interval, Dropout, Pattern, and Serial triggering.
• MSO Functionality: Optional 16 digital channels for mixed-signal analysis.
• Waveform Recorder: History Mode allows users to store and replay up to 90,000 waveforms.
• Comprehensive Math Functions: Includes FFT, differentiation, integration, and enhanced resolution modes.
• 256-Level Intensity Grading: Color temperature display for identifying rare signal events.
• Connectivity: USB Host, USB Device, LAN, and External Trigger support for seamless data transfer and remote control.

• High Bandwidth & Sampling Rate: Models available in 200 MHz, 350 MHz, 500 MHz, and 1 GHz with up to 5 GS/s sample rate.
• Deep Memory Capture: Up to 250 Mpts in interleaved mode, allowing detailed waveform analysis.
• Advanced Triggering & Waveform Capture: Zone Triggering, History Mode (100,000 waveforms), and a waveform capture rate of 500,000 wfm/s.
• Math & Measurement Functions: 9 basic math functions (FFT, addition, subtraction, multiplication, division, etc.) and 50+ automatic measurement parameters.
• Bode Plot & Power Analysis: Standard features include Bode Plot for frequency response testing and comprehensive power analysis for applications like power quality assessment, current harmonics, inrush current, and switching loss.
• Mixed Signal Debugging: Optional 16-channel MSO capability for digital signal acquisition.
• Connectivity & Remote Access: USB, LAN, and embedded web server for remote control and data analysis.