Uncategorized

Key Features:

• Dual-channel arbitrary waveform generation with 2.8 MS/s sampling rate and 16-bit resolution.
• Integrated with BOLAB WaveMaster software for graphical and tabular waveform design.
• Endless waveform streaming with double buffer memory for uninterrupted operation.
• Real-time triggering, data acquisition, and live waveform editing.
• Supports importing oscilloscope data, ASCII, and TDMS files.
• Preloaded waveform libraries for LV 124, LV 148, ISO 7637-2, ISO 16750-2, GMW, JLR, VW standards.
• Seamless integration with LabView, Python, CANoe, MATLAB, C/C++ via DLLs.
• Compact and robust design for laboratory and industrial testing applications.

Key Features:

• Wide frequency range: 9 kHz – 8 GHz
• High gain: 29 dB up to 6 GHz, 27 dB from 6 – 8 GHz
• Low noise figure: < 2.7 dB @ 1 GHz
• Compact aluminum housing (85 × 36 × 29 mm, 130 g)
• ESD-protected input for safe operation
• Operates on simple +12 V DC power supply
• Rugged and lightweight design for field and lab use

CAPITOLE RCS software is an advanced radar signature prediction tool developed by NEXIO for calculating Radar Cross Section (RCS) with high precision. It enables defense engineers and research organizations to analyze, simulate, and optimize the radar visibility of complex systems such as aircraft, ships, and military equipment.

Key Features

• Dedicated radar cross section (RCS) simulation platform
• High accuracy radar signature prediction for defense systems
• Advanced solvers for small and large complex structures
• Supports millions of unknowns for large scale simulations
• Digital twin based modeling for pre prototype evaluation
• Parametric studies for optimizing radar stealth performance
• Reduces physical prototyping and testing costs
• Clean and user friendly interface for RCS analysis
• Suitable for aircraft, naval, and defense system design
• Helps improve detection and stealth performance analysis

CAPITOLE RF software by NEXIO is an advanced radio frequency simulation and antenna design tool that enables engineers to predict, analyze, and optimize RF performance during the early design phase. It helps reduce development time, minimize prototyping costs, and improve overall system efficiency through accurate digital simulation.

Key Features

• Advanced RF and antenna design simulation platform
• High precision electromagnetic propagation modeling
• Creation of realistic digital twin system models
• Parametric study support for performance optimization
• Reduces prototype iterations and development costs
• Validates antenna performance before physical testing
• Optimized for telecommunications, radar, and radiolocation applications
• Supports PCB antenna design and material selection analysis
• High performance solver technology for accurate results
• Helps ensure compliance with RF design specifications

CDG 7000 Conducted Immunity Test System, 10 kHz – 400 MHz

Key Features:

• All-in-one IEC/EN 61000-4-6 immunity test system with RF signal generator, power amplifier, 3-channel RF voltmeter, and directional coupler.
• Frequency range from 10 kHz to 400 MHz with multiple amplifier versions (25 W, 75 W, 75 W/10k).
• Supports BCI tests (ISO 11452-4) and NAMUR standards.
• Advanced software HELIA 7 with EUT monitoring and automated reporting.
• Interfaces: USB, LAN, optional GPIB for flexible integration.
• Expandable with external amplifiers and configurable digital I/O.
• Compact, robust 19″ desktop housing with 3-year warranty.

The DAM 6.0-P Dual Antenna Mast is a high-precision, dual-antenna mast designed for accurate EMC measurements in magnetic absorption chambers.

Key Features:

• Adjustable height from 1.0 m to 6.0 m with electric stepper motor
• Pneumatic polarization change 0° to 90° in approx. 3 seconds
• Dual antenna support with max. load 20 kg (balanced)
• Rotating antenna bars to eliminate elevation errors
• Robust base: 0.95 m x 0.73 m
• Non-metallic construction (plastic and reinforced fiberglass)
• Remote control via LAN (TCP/IP) with FCU3.0 or NCD Controller
• Suitable for EMC testing labs, automotive, industrial, and telecom setups

Reliable digital transmission system for analog audio and video signals with multiple configuration options for EMC testing and monitoring.

Key Features:

• Transmits analog audio and video signals digitally over fiber optics
• Supports both unidirectional and bidirectional communication
• Available in multiple configurations: audio (stereo), video (NTSC/PAL), or combined
• Ideal for EMC testing, acoustic monitoring, and immunity test surveillance
• Integrated microphone and external input/output support in intercom models
• Suitable for automotive, military, aerospace, and RF industries
• Compliant with MIL-STD-461 standards

The DYN 8WD I-30t Dynamometer integrated into TT 16.0-30t Turntable is a high-capacity vehicle testing solution designed for EMC-compliant measurement and simulation.

Key Features:

• Load capacity: 30,000 kg with adjustable axle configuration
• Maximum dynamometer speed: 120 km/h
• Turntable diameter: 16.0 m, rotational speed 0.1–0.5 rpm
• Adjustable track width: 900 mm – 2700 mm
• Turntable height: 2800 mm, stainless steel cover plate
• Servo motor-driven turntable with bevel gear for smooth rotation
• Integrated emergency stop and safety switches
• Software-controlled with Maturo DynSoft, including cycle simulation, speed, torque, and force monitoring
• EMC compliant: emissions typically 10 dB under CISPR 12 and CISPR 25 limits
• Supports advanced vehicle test cycles, ABS/ESP testing, uphill/downhill simulation, and tractive force control

EMC03640A Low Noise Preamplifier – 30 MHz to 6 GHz

Key Features:

• Wide frequency range: 30 MHz to 6 GHz
• High gain: 40 dB minimum with ±2.5 dB flatness
• Low noise figure: ≤ 2.5 dB
• High EMI performance with excellent linearity
• Compensates for long cable loss in EMI measurements
• Improves system noise floor flatness
• Unconditionally stable with high dynamic range
• State-of-the-art technology for compliance testing
• Meets major EMI/EMC standards (ANSI, CISPR, MIL-STD)
• Compact and robust design with AC mains power input

The EMC051835SE is a high-performance preamplifier designed to deliver exceptional gain and EMI measurement accuracy across a wide frequency range.

Key Features:

• Wide frequency coverage: 500 MHz to 18 GHz
• 35 dB minimum gain with ±2.5 dB flatness
• Low noise figure of 3 dB for improved sensitivity
• High linearity LNA for EMI testing applications
• Enhances system noise floor flatness
• Compensates for long cable losses in EMI measurements
• Built-in AC input power with grounding detect circuit
• Durable, compact design with SMA female connectors
• Unconditionally stable performance

EMC1150 Low Noise Preamplifier (9 kHz – 1 GHz, 50 dB Gain)

Key Features:

• Wide frequency range: 9 kHz to 1 GHz
• High gain performance: 50 dB minimum
• Low noise figure: 1.8 dB typical, 2.5 dB max
• Excellent EMI measurement capability
• Improves system noise floor flatness
• High linearity and dynamic range
• Unconditionally stable operation
• Built-in AC input power with grounding detect circuit
• Compact, lightweight design (2.8 kg)
• Optional pulse/ESD protector available

EMC118A45SE Low Noise Preamplifier | 1–18 GHz, 45 dB Gain

Key Features:

• Wide 1–18 GHz frequency range for versatile EMI testing
• High 45 dB gain with flatness across the band
• Low noise figure (3.5–8 dB max) for improved sensitivity
• Compensates long cable loss for accurate EMI measurements
• Unconditionally stable with high linearity and dynamic range
• Built-in grounding detect circuit for reliable operation
• Compact design with 50-ohm SMA female connectors
• Available in multiple versions with mounting options

Key Features:

• Wide frequency range: 18–40 GHz
• 40 dB minimum gain with ±4.5 dB flatness
• 5 dB maximum noise figure for accurate EMI testing
• Compensates for long cable loss in EMI measurements
• Enhances system noise floor flatness
• High linearity LNA for EMI compliance applications
• High dynamic range and unconditionally stable
• Built-in AC input power supply with grounding detect circuit
• Rugged 2.92 mm female connectors for reliability
• Versions: Bench model and mast-mount with clamp & power supply

The EMC184040SE is a high-performance low noise preamplifier designed for EMI measurements across 18–40 GHz. With 40 dB gain and a 5 dB noise figure, it ensures reliable, stable, and accurate performance for demanding EMC testing environments.

Key Features:

• Wide frequency range: 18–40 GHz
• 40 dB minimum gain with ±4.5 dB flatness
• 5 dB noise figure for low-noise operation
• Compensates for long cable losses in EMI measurements
• High linearity and dynamic range for precise testing
• Unconditionally stable design
• Available in multiple mounting versions (bench, tube clamp, box clamp)

EMCview PC Software Pre-Compliance Testing

Key Features:

• Easy-to-use software for radiated and conducted emissions testing.
• Pre-configured project files for CISPR-xx (EN550xx) standards and automotive EMC standards.
• Built-in amplitude correction for cables, LISNs, TEM cells, antennas, amplifiers, and probes.
• Supports spectrum analyzers from Rigol, Siglent, and R&S (FPC/FPH series).
• Dual measurement runs with Average/Quasi-Peak or Peak/Quasi-Peak modes.
• Fast Quasi-Peak scan of critical frequencies for efficient troubleshooting.
• Configurable limit lines, margins, and correction files.
• Automatic test reports and versatile import/export functions.
• Ideal for in-house EMC testing, design validation, and cost reduction.

EMScanner: 150 kHz – 8 GHz High-Frequency EMC Desktop Scanner

Key Features:

• Wide frequency coverage from 150 kHz to 8 GHz
• 3.5 mm effective spatial resolution for precise diagnostics
• Real-time spectral and spatial scans with peak-hold and comparison features
• Reduces testing time by over 100x and design cycle times by up to 50%
• Supports emission, immunity, EMI shielding, and broadband noise testing
• Compact, lightweight, and designed for high-speed, high-density PCB projects
• EMViewer Software for advanced scan visualization, reporting, and analysis
• Compatible with leading spectrum analyzers, supporting multiple formats and overlays