1 800 665 7301 | info@tmetrix.com

Uncategorized

Showing all 12 results


    • Available in 4.5-digit (60,000 count) and 6.5-digit (2,200,000 count) resolutions.
    • Wide measurement range:
      • DC Voltage: Up to 1000V
      • AC Voltage: Up to 750V (True RMS)
      • Current: 10A (AC/DC)
      • Resistance: 100MΩ (2-wire/4-wire)
      • Capacitance: 2nF – 100mF
      • Temperature measurements with TC and RTD sensor support.
    • High-speed measurements:
      • T3DMM4-5: 150 readings per second
      • T3DMM6-5: 10,000 readings per second
    • Advanced mathematical functions such as Max, Min, Standard Deviation, dBm/dB, Relative Measurement, Pass/Fail Analysis, and Histograms.
    • Connectivity: USB Device, USB Host, and LAN for remote operation via SCPI commands.
    • Data Storage: 1GB NAND flash memory for saving configuration files and test data.
    • Built-in cold junction compensation for accurate temperature measurements.
    • File management system supporting U-disc and local storage for convenient data access.
    • Comprehensive user interface with a dual-display system for easy navigation.
    • Automatic measurement functions, including statistical analysis, gating, and reference functions.

     

    • 20 Amp Operation: Full performance with 20 amp service
    • Automatic Power Reduction: Reduces power usage during idle periods
    • Heat Only Mode: Reduces power usage when cold temperatures are not used
    • WhisperStream Technology: quieter, smooth-sounding operation, 56 dBA
    • Frost Free Test Environment: dry air purge for tester interface, prevents condensation:
      0.5 to 3scfm (0.25 to 1.5 l/s)
    • Heated Defrost: quickly removes moisture buildup from internal chiller
    • DUT Temperature Control : Proprietary control algorithm enables DUT temperature to be directly controlled
    • Transition Rate*
      -55 to +125°C, approx. 10 seconds
      125 to -55°C, approx. 10 seconds
    • System Airflow Output*
      4 to 18scfm (1.9 to 8.5 l/s) Continuous
    • Temperature Range*
      -80 to +225°C (60Hz) No LN2 or LCO2 Required

     

    • High reliability thermal cycling without thermoelectric modules
    • Temperature range: -65 to 175°C
    • Cooling power:
      • 40W at -40°C for lower power devices
      • 55W at -55°C and 120W at -40°C.
    • Transition rate: up to <35 sec over 25 to -40°C
    • Easy and secure thermal connection to in-circuit or test socked DUT
    • Touch-screen controller: user-programmable temperatures, graphing, data logging
    • Communications options: Ethernet, USB, IEEE, RS232

     

  • -60° to +200°C

    • Economy model with high thermal capacity
    • Precise temperatures with fast transitions from -60 to 200°C
    • No annual leak testing required per EU 517/2014 F-Gas Regulation
    • Effective testing and conditioning of electronic components, boards, and modules
    • Available for 50 and 60Hz operation
    • No need for Liquid Nitrogen (LN2) or Liquid Carbon Dioxide (LCO2)
    • Remote communications and set up and touch screen operation
    • User Defined Temperature Limits

     

     

    • 16K Video Generator & Analyzer
    • Dolby Vision™, HDR 10 and HDR 10+
    • validating DP 1.4a & DP 2.0 Link Layer on DP Sinks and Sources
    • Power Input +12 Vdc (AC/DC converter included)
    • Module Size/Weight TBD for Weight and Size

     
    Unigraf_1.PNG

     

    • Compact sized DisplayPort™ 1.2 compliant Reference Sink
    • HBR2 and MST capable Sink and Branch device
    • Cerified as the platform for DP 1.2 LL CTS Ext1 tests
    • Optional MST Debug panel and AUX Channel Monitor
    • Debug and Test Controller GUI enables monitoring and previewing any MST stream
    • User programmable EDID and DPCD

     

    •  HDMI 2.1 Test Equipment (FRL)
    • Enhanced Gaming Features (VRR, ALLM)
    • FEC, Forward Error Correction
    • HDCP 2.2 & HDCP 2.3 support  TMDS Support
    • Dolby Vision™ Test Tool
    • 8K@60 fps Support (12 Gbps/channel)
    • eARC Support (end of 2019)
    • DSC Support (ESTIMATED 2020)
    • UCD Console GUI for debugging
    • High level API for easy integreation

     

    • Automated tests for USB-C™ DisplayPort™ Alt Mode
    • Electrical Test to verify whole USB-C connector with single cable insert
    • Test USB 2.0 and USB 3.0
    • 4K@60 support
    • Easily set test parameters with provided Software
    • Easily run tests from the commandline
    • Unigraf’s Test System Interface (TSI) Support
    • Third Part Test Management Software
    • Support e.g. NI TestStand Support

     

    • UHD / 4K compliant test equipment
    • HDMI 2.0 and DP 1.2 input and output in one unit
    • DCP Approved HDCP 2.3 CTS Test Tool
    • HDCP 1.3 and HDCP 2.3 support
    • Sink and source video, audio and configuration parameters
    • USB 3.0 connected
    • UCD Console GUI for debugging
    • High level API for easy integration

     

    • Test DP over USB-C video and audio
    • Test USB-C Power Delivery with DP Alt Mode
    • DCP Apporved HDCP 2.3 CTS Tests
    • Verify interface signal continuity
    • 4K@60 support
    • HDCP 1.3 and HDCP 2.3 support
    • Capture video and audio, monitor and control interface parameters
    • USB signal pass-thru
    • UCD Console GUI for debugging
    • High level API for easy integration

     

     

    • VESA Certified DP 1.4 Link Layer CTS Test Tool
    • DCP Approved HDCP 2.3 CTS Tool
    • 8K and 4K Reference Sink, Source & Repeater
    • DP 1.4 / HBR3 input and output in one unit
    • USB-C input and output with supplied converter cable
    • MST support (4 streams)
    • DSC Sink, FEC and LTTPR support
    • HDCP 1.3 and HDCP 2.3 support
    • High level API for easy integration

     

  • USB-C DisplayPort Alt Mode Test Unit DP 1.4a, HBR3 & PD 3.0

    • 8K and 4K Reference Sink & Source
    • DP 1.4a Link Layer CTS for Sinks & Sources
    • HDCP 2.3 CTS for Transmitters & Receivers
    • DP 1.4a features:
      * Up to HBR3 simultaneous input and output in one unit
      * DSC Sink & Source with off-line encoding and decoding
      * FEC and LTTPR support
      * MST support (4 streams)
    • USB-C v1.3 with Power Delivery 3.0
      * DP Alt Mode
      * Capable to sink & source 9V@3A
      * PD Role swaps supported
    • USB3.2Gen2 (10Gbit/s) bypass between test interfaces
    • HDCP 1.3 and HDCP 2.3 support

     


Showing all 12 results