‹ Back to previous page

EMSCOPE: 9kHz - 110MHz 2 channel Receiver/LISN

EMSCOPE: 9kHz – 110MHz 2 channel Receiver/LISN

EMI Measurements:
- FFT-based dual-channel receiver
- According to CISPR16-1-1
- Peak, Quasi-Peak, and Average Detectors
- Resolution Bandwidth Filters of 200 Hz, 9 kHz, and 120 kHz (CISPR), and 1 kHz and 10 kHz (MIL)
- The fastest receiver in the market: Line and Neutral measurements with the 3 detectors simultaneously (6 simultaneous measurements)

REQUEST A QUOTE

SKU: EMSCOPE: 9kHz - 110MHz 2 channel Receiver/LISN Categories: EMC, RF Safety and Compliance, Products

Introducing the EMSCOPE: 9kHz – 110MHz 2 channel Receiver/LISN

EMSCOPE is the new EMZER’s instrument for EMI measurements that combines:

Two simultaneous EMI Receivers with PK, QPK and AVG detectors for both channels according to CISPR 16-1-1.
An optional 16-A single-phase dual-port V- network Line Impedance Stabilization Network (LISN).
Two Transient Limiters.
Integrated test software (no additionalinstallation is required).Both channels can be run in parallel and real-time, showing an important reduction of the measurement time when compared to any other option.

Additionally, thanks to this feature, EMSCOPE can show the measurement of the L-G and N-G conducted emissions (as defined in CISPR 16), or the common-mode and differential-mode (modal) emissions with any of the three detectors.

Modal-emission measurements are fundamental to knowing the dominant mode and implementing the suitable power-line filter accordingly, using fewer components and getting a more cost-effective design.

EMSCOPE is remotely controlled using a friendly web-based application, free of charge and with no cost of ownership. The communication is made through the supplied fiber-optic cable, to avoid the coupling of external interferences, and a multi-mode fiber-to-Ethernet converter, that allows the instrument access from anywhere on your LAN.

Key Features

Compliance Testing Excellence:

Simultaneous EMI measurements on two channels as per CISPR 16-1-1 standards.
Real-time peak, quasi-peak, and average detection for comprehensive compliance testing.
Resolution bandwidths (RBWs) of 200 Hz, 9 kHz, 120 kHz (CISPR) and 1 kHz, 10 kHz (MIL) ensure precise testing.

Efficient EMI Troubleshooting with Modal Measurements:

Simultaneous measurement of common and differential mode interference emitted by the Device Under Test (DUT).
Key troubleshooting step aiding in locating dominant modes at relevant frequencies for effective power-line filter design.

Rapid Measurement Speed with FFT Dual Channel:

Dual-channel receiver for simultaneous measurements on Line and Neutral channels.
Utilizes Fast Fourier Transform (FFT) properties for quick and accurate spectral measurements.

Detailed EUT Analysis with Waterfall Function:

Depicts conducted emissions in a three-dimensional representation for comprehensive analysis.
Monitors DUT over up to 600 sweeps, aiding in identification and analysis of worst-case mode.

Insightful Time Domain Mode with Oscilloscope (Optional):

Full oscilloscope mode providing waveform voltage measurements in the time domain.
Offers configurable settings for deeper insight into interference nature.

Flexibility with External Artificial Mains Networks:

Integrates a 16-A single-phase dual-port V-network LISN and two Transient Limiters.
Connects to external LISNs for specific applications like automotive and military.

Plug & Play with Integrated Software:

Easy installation and usage with integrated software – no additional installations required.
Can be connected to an office LAN or directly to a PC using supplied optical fiber.

All-in-One Cost-Effective Solution:

Integrates complete measurement setup in a cost-effective, compact instrument.
Combines two-channel receivers, single-phase LISN, transient limiters, and software into a single package.

Key Benefits

Ensures compliance with EMC standards during the development phase.
Accelerates the product development cycle.
Enables optimal power-line filter implementation for the DUT.
Reduces testing time and associated designing costs.
Fastest EMI receiver in the market for conducted emissions.
Unique double-channel capability for enhanced performance.
Represents interference in the Time-Frequency domain for easy detection.
Facilitates identification of worst functional mode for efficient measurements.
Enhances understanding of DUT interference behaviour for effective analysis and resolution.
Maximum flexibility for diverse application needs.
Optional internal 16 A LISN for additional cost savings.
Streamlines usage with a user-friendly web-based application.
Provides automatic reporting and easy data sharing.
Cost-effective solution compared to purchasing individual components.
Compact and easy to use, perfect for lab or on-site testing.

Trust the Experts at ACA TMetrix Inc.

ACA TMetrix Inc. is a leading Canadian distributor of test and measurement instruments and design tools. For over 55 years we have provided products manufactured by the world’s leading instrument manufacturers. Leading Distributor of Design Tools and Test Equipment in Canada.