Products

Key Features:

• PXI/cPCI JTAG controller for seamless integration into PXI-based test systems
• Supports up to 4 JTAG chains on a Unit Under Test (UUT)
• Configurable I/O pin-out for maximum flexibility across projects
• Fully compatible with other XJLink2 controllers
• TCK clock speeds up to 166 MHz
• Programmable voltage domains from 1.1 V to 3.3 V in 0.1 V steps
• Built-in voltage meter and frequency counter on all I/O pins
• Adjustable signal termination with auto-skew control
• Includes LabVIEW™ Virtual Instruments (VIs) for easy integration
• Self-contained licence for use on multiple PXI racks or servers

Key Features:

• Portable USB-C to JTAG controller with 40 I/O pins
• Supports up to 8 separate JTAG TAP chains with independent frequencies
• Compact and rugged aluminium casing for lab, production, or field use
• Configurable JTAG pin-out to suit any Unit Under Test (UUT)
• Electrical protection against –30 V to +30 V input
• Four programmable I/O voltages (1.2 V to 3.3 V, in 0.1 V steps)
• Built-in voltmeter and frequency counter on all pins
• High-speed operation with TCK up to 166 MHz
• USB bus-powered with locking Type-C connector
• Self-contained licence for maximum flexibility

Key Features:

• Compact USB JTAG controller for flexible board testing
• Supports up to 4 JTAG chains per UUT
• Lightweight, portable, and ideal for lab, production, or field use
• Configurable pin-out for easy adaptation to any PCB design
• High-speed TCK clock up to 166 MHz
• Two programmable voltages from 1.1 V to 3.3 V in 0.1 V steps
• Built-in voltmeter and frequency counter on all I/O pins
• +5 V tolerant signals with auto-skew control
• USB bus-powered, no external PSU needed
• Self-contained licence, usable on multiple PCs

Key Features

• Approved by Keysight Technologies for i3070 ICT integration
• Fully compatible with all XJTAG projects
• High-speed programming with TCK up to 166 MHz
• Supports up to 4 JTAG chain connections to UUT
• Configurable interface voltages (1.1 V to 3.3 V)
• Adjustable signal slew rate and drive strength
• Automatic signal skew control for maximum reliability
• Frequency counter on all I/O pins (up to 200 MHz input)
• Fits into one i3070 utility card slot (multiple units supported)
• Enables test + programming in a single stage to boost throughput
• Supports additional protocols including I²C, SPI, and vendor-specific interfaces
• Flexible software licensing options for stand-alone or network operation

Key Features:

• 4-port JTAG tester for simultaneous testing of up to 4 boards
• High-speed USB 2.0 interface with robust performance
• Supports up to 4 TAP chains per UUT
• Configurable JTAG pin-out for simplified connectivity
• Parallel or independent testing on each port
• Programmable voltages from 1.1 V to 3.3 V in 0.1 V steps
• Built-in voltmeter and frequency counter on all I/O pins
• Automatic signal skew control for reliable operation
• Self-contained licence for use across multiple PCs
• Ideal for production lines and PCB manufacturers

Applications:

• Aerospace & Defense – Avionics, MIL-STD-704, EMC compliance, 400Hz & wild frequency testing
• EV Charging & V2G/V2H Testing – On-board chargers, grid-tied inverters, smart grid simulation
• Energy Storage & Renewable Systems – Home ESS, solar PV/grid-tied inverter testing
• Industrial Power Simulation – Frequency conversion, harmonic analysis, transient simulations
• Smart Grid & Compliance Testing – IEC 61000, RTCA DO-160, IEEE 1547, and more

High-Power 4-Quadrant AC & DC Power Source with Load Option

• Powerful & Versatile: 12kVA / kW to 21kVA / kW in a 4U chassis. Parallel units up to 168kVA/kW (single cabinet)or 252kVA/kW (dual cabinet).
• Multi-Phase Flexibility: Supports single-phase, split-phase, and three-phase configurations with AC, DC, or AC+DC output.
• Grid Simulation & Compliance Testing: Emulates real-world power grid conditions, simulating disturbances, harmonics, and interharmonics for accurate renewable energy testing (solar inverters, EV charging, microgrid, and UPS applications).
• Regenerative Efficiency: Over 90% energy recovery back to the grid reduces power consumption and operational costs.
• Advanced Control & Monitoring: SmartSource Suite enables remote control via an intuitive web browser interface with LAN, USB, GPIB, and RS232 connectivity.

High-Power 4-Quadrant AC & DC Power Source

• High Power Density: Available in 30kVA/kW, 45kVA/kW, and 55kVA/kW models, with parallel cabinets scaling up to 550kVA/kW.
• Versatile Output Capability: AC, DC, or AC+DC modes in single-phase, split-phase, or three-phase configurations.
• Dual Constant Power Voltage Ranges:
  • AC Voltage: 0-240V L-N / 0-415V L-L & 0-480V L-N / 0-830V L-L
  • DC Voltage: 0-340Vdc & 0-680Vdc
• Grid Compliance Testing: Meets global standards like IEEE 1547, UL 1741, IEC 61000-3, IEC 61000-4
• Regenerative Power Efficiency: >90% energy recovery back to the grid, reducing power waste and operational costs
• PHIL Interface for Hardware-in-the-Loop (HIL) Testing: High-speed analog I/O for real-time frequency, voltage, and current control.
• SmartSource Suite for Remote Testing: Web-based real-time monitoring and control via LAN, USB, GPIB, and RS232.

4-Quadrant Programmable Load with Energy Recovery

• Powerful & Scalable: 6kVA/kW to 21kVA/kW in a compact 4U chassis. Parallel units up to 168kVA/kW per cabinet or 252kVA/kW in dual cabinets.
• Versatile Load Simulation: AC and DC load capability with single-phase, split-phase, and three-phase configurations.
• Grid-Ready Compliance Testing: Supports IEEE 1547, UL 1741, IEC 61000-3, IEC 61000-4 compliance testing.
• Energy-Efficient Regeneration: Returns over 90% of absorbed power back to the grid, reducing operational costs.
• Dynamic Load Emulation: Simulates linear and non-linear loads, harmonics, transient conditions, and waveform distortions.
• High-Speed Smart Control: SmartSource Suite for real-time test automation and remote monitoring.

High-Power AC/DC Load Simulator with PHIL Interface

• Scalable Power Density: Available in 30kVA/kW, 45kVA/kW, and 55kVA/kW models, with parallel cabinets up to 550kVA/kW.
• Versatile AC/DC Load Capability: Supports single-phase, split-phase, three-phase, and multi-channel configurations.
• Dual Constant Power Voltage Ranges:
  • AC Voltage: 5-220V L-N / 9-380V L-L & 5-440V L-N / 9-760V L-L
  • DC Voltage: 0-335Vdc & 9-650Vdc
• Advanced PHIL Interface (Option H): High-speed analog I/O for real-time frequency, voltage, and current control.
• Regenerative Power Efficiency: Returns over 90% of absorbed energy back to the grid, reducing operational costs & heat dissipation.
• Dynamic Load Simulation: Simulates harmonics, transient conditions, and waveform distortions for real-world power testing.
• SmartSource Suite for Remote Control: Web-based monitoring and test automation via LAN, USB, GPIB, and RS232.

The AZX Series (Regenerative AC / DC Power Source) is a family of high power, single, split and three phase, AC, DC and AC+DC output capable Power Sources with full energy recovery to the AC mains when sinking power from the equipment under test. Available models range from 30 kVA to 440 kVA. Using a modern color touch screen based user interface for ease of use, the AZX Series is cost effective and fully programmable for both basic frequency conversion and advanced AC power line or DC power disturbance test applications requiring up to 1000 Hz fundamental frequency.

The energy recovery capability allows both sourcing and sinking of current and power up to 100% of rated power. Adding the Load Option (Option L) adds full electronic regenerative AC & DC Load programming capability to the AZX.