Products

The Hioki 3153 HiTESTER is an all-in-one solution for insulation resistance and AC/DC voltage withstand testing. It is fully programmable for automated multi-point testing, making it ideal for industrial, manufacturing, and electrical safety applications.

Key Features

• Programmable insulation testing from 50 V to 1200 V DC
• Dielectric strength testing for AC/DC voltages up to 5 kV
• Store and program up to 32 test files with 50 steps each
• Optional scanner for automatic multi-point testing
• Accurate voltage generation via PWM method, independent of supply voltage
• Ramp timer function for controlled voltage rise/fall during testing
• Digital display of measured voltage, current, and resistance
• Compact design with full remote operation capability

The Hioki 3930 High Voltage Scanner is a passive auxiliary device designed to streamline multi-point high-voltage testing when paired with the Hioki 3153 or a sequencer. Its isolated channels allow safe and efficient AC/DC voltage testing while minimizing connection changes, making it ideal for industrial testing and quality control applications.

Key Features

• Supports AC/DC high-voltage output up to 5 kV
• Multi-point testing: 8 channels per unit, up to 32 channels with 4 connected units
• Fully isolated HV I/O, control lines, and power supply
• Operates in multi-mode or single-mode scanning for flexible testing
• Compatible with Hioki 3153 program function or standard sequencer
• Fast operation with <6 ms response and recovery time
• Includes HV test leads, control connector cable, and grounding cable

The Hioki BT5525 Tester is engineered for battery production lines to detect microscopic insulation defects and contamination before shipment. It ensures safety, reduces false negatives, and accelerates high-speed testing, making it ideal for modern battery manufacturing.

Key Features

• Proprietary BDD function detects minuscule internal short-circuits caused by contamination
• Stable insulation resistance testing even in noisy environments
• Contact check function prevents erroneous judgments
• Maximum test voltage of 500 V for battery cell, module, and pack testing
• High-speed charging up to 50 mA and discharging up to 40 mA for faster testing
• Compact design allows integration into battery production systems
• Cost-effective solution for small to large battery cells and packs
• PC application for waveform review and CSV data export

The Hioki IR5050 High Voltage Insulation Tester delivers precise and reliable insulation resistance testing up to 5 kV and 10 TΩ. Designed for professionals, it offers advanced diagnostics, wireless connectivity, and rugged durability — making it ideal for industrial maintenance and electrical testing.

Key Features:

• Measures insulation resistance up to 10 TΩ
• Test voltages from 250 V to 5000 V DC
• Calculates and displays PI, DAR, and DD diagnostics automatically
• Supports both wireless (Bluetooth) and USB data transfer
• Compact, lightweight design with IP65-rated carrying case
• Step and ramp voltage testing for advanced insulation analysis
• CAT IV and CAT III safety ratings for enhanced protection
• Compatible with GENNECT Cross app for real-time reporting

Key Features:

• Safely measure solar PV insulation resistance while generating power
• CAT III 2000 V and CAT IV 1000 V safety rating for reliable high-voltage testing
• 5 kV test voltage and 10 TΩ insulation resistance range
• Specialized PV insulation measurement mode compliant with IEC 62446-1
• Automatically calculates and displays PI, DAR, and DD diagnostics
• Flexible voltage adjustment from 250 V to 5000 V
• Data memory with wireless and USB connectivity options
• Compact, lightweight design with IP65-rated carrying case for durability

Key Features:

• Fastest insulation tester in the industry with results in as little as 50 ms
• Wide test voltage range: 25 V to 1000 V with 1 V resolution
• Quick residual voltage discharge for faster takt times
• Contact check function prevents false readings from poor connections
• Short-circuit check detects micro-shorts before testing
• Built-in LAN and RS-232C for system integration
• Compact, lightweight design ideal for battery and production line testing
• Models available: ST5520 (I/O output) and ST5520-01 (BCD output)

The industry’s highest-resolution portable TDR cable tester, the MOHR CT100 delivers unmatched accuracy for coaxial and twisted-pair cables in the field, lab, or production floor.

Key Features:

• Resolves connector details < 1 cm (8–10x sharper than competitors)
• Tests coaxial, twisted-pair, and multi-conductor cables
• Exceeds Tektronix® 1502C TDR specifications
• Accurate impedance and cable length measurement with 16-bit ADC
• Detects intermittent faults with up to 250,000 samples/sec
• Integrated LAN/WAN/Internet remote control with CT Viewer™ 2 software
• Lightweight, portable design with 4.3″ color LCD
• Used by the U.S. Navy as the Tektronix 1502 series replacement

Experience precision RF signal analysis on the go with this lightweight, handheld analyzer designed for both lab and field use.

Key Features:

• Frequency range: 1MHz to 1.3GHz (PSA1303) or 2.7GHz (PSA2703)
• RBW: 300Hz to 10MHz
• -115dBm typical noise floor
• Dual markers with absolute/difference values
• AM/FM demodulation in zero span
• Auto-find & smart marker peak tracking
• USB for waveform saving and PC connection
• Live, View, and Reference trace modes
• 6-hour lithium-ion battery operation
• Weighs just 0.58 kg
• Optional U01 Upgrade: Limit lines, data logging, triggering, compensation tables

High-performance, battery-powered spectrum analyzers ideal for RF engineers and field use.

Key Features:

• Frequency range: 10MHz to 3.6GHz or 6.0GHz
• -120dBm typical noise floor
• Resolution bandwidths from 300Hz to 10MHz
• AM/FM audio demodulation with zero span
• Live, View & Reference traces with markers
• Smart marker tracking with peak detection
• USB data logging & real-time PC view
• Compact, lightweight (0.56 kg) with >3hr battery
• Optional U02 features: limit lines, OBW, ACPR, AM/FM waveform demodulation

The Teledyne T3SA Series Spectrum Analyzers deliver high-performance signal analysis from 9 kHz to 3.2 GHz in a compact, easy-to-use design. Ideal for R&D, education, production, and pre-compliance testing, it features a large touchscreen and advanced digital IF technology.

Key Features:

• All Digital IF technology10.1”
• WVGA (1024 x 600) touchscreen display
• Frequency range from 9 kHz to 3.2 GHz
• -161 dBm/Hz displayed average noise level (typical)
• -98 dBc/Hz @ 10 kHz offset phase noise (typical)
• Total amplitude accuracy < 0.7 dB
• 1 Hz minimum resolution bandwidth (RBW)
• Built-in preamplifier for improved sensitivity

Typical Applications

● Research Laboratory
● Development Laboratory
● Repair and Maintenance
● Calibration Laboratory
● Automatic Production Test
● General bench-top use

Applications:

• Aerospace & Defense – Avionics, MIL-STD-704, EMC compliance, 400Hz & wild frequency testing
• EV Charging & V2G/V2H Testing – On-board chargers, grid-tied inverters, smart grid simulation
• Energy Storage & Renewable Systems – Home ESS, solar PV/grid-tied inverter testing
• Industrial Power Simulation – Frequency conversion, harmonic analysis, transient simulations
• Smart Grid & Compliance Testing – IEC 61000, RTCA DO-160, IEEE 1547, and more

Applications

• Aerospace & Avionics – Frequency conversion (400Hz & wild frequency testing), MIL-STD compliance
• EV Charging & Power Electronics – On-board chargers (OBC), V2G/V2H testing, battery simulation
• Renewable Energy Systems – Solar PV/grid-tied inverter testing, home ESS & smart grid simulations
• Power Supply & Industrial Testing – AC/DC power supply evaluation, network server & data center testing
• Research & Development Labs – High-frequency power testing, compliance verification, transient simulations

Applications

• Aerospace & Avionics Testing – 400Hz & wild frequency (360Hz-800Hz) compliance
• EV Charging & Power Electronics – AC/DC conversion, V2G, V2H, and OBC testing
• Renewable Energy & Smart Grid – Solar PV inverters, energy storage & grid simulation
• Industrial Power & Manufacturing – AC power supply testing, production line QA
• R&D & Compliance Labs – IEC61000, MIL-STD-704, RTCA DO-160 testing
• Railway Power Systems – 16.6Hz & 400Hz frequency compliance

High-Power 4-Quadrant AC & DC Power Source with Load Option

• Powerful & Versatile: 12kVA / kW to 21kVA / kW in a 4U chassis. Parallel units up to 168kVA/kW (single cabinet)or 252kVA/kW (dual cabinet).
• Multi-Phase Flexibility: Supports single-phase, split-phase, and three-phase configurations with AC, DC, or AC+DC output.
• Grid Simulation & Compliance Testing: Emulates real-world power grid conditions, simulating disturbances, harmonics, and interharmonics for accurate renewable energy testing (solar inverters, EV charging, microgrid, and UPS applications).
• Regenerative Efficiency: Over 90% energy recovery back to the grid reduces power consumption and operational costs.
• Advanced Control & Monitoring: SmartSource Suite enables remote control via an intuitive web browser interface with LAN, USB, GPIB, and RS232 connectivity.

4-Quadrant Programmable Load with Energy Recovery

• Powerful & Scalable: 6kVA/kW to 21kVA/kW in a compact 4U chassis. Parallel units up to 168kVA/kW per cabinet or 252kVA/kW in dual cabinets.
• Versatile Load Simulation: AC and DC load capability with single-phase, split-phase, and three-phase configurations.
• Grid-Ready Compliance Testing: Supports IEEE 1547, UL 1741, IEC 61000-3, IEC 61000-4 compliance testing.
• Energy-Efficient Regeneration: Returns over 90% of absorbed power back to the grid, reducing operational costs.
• Dynamic Load Emulation: Simulates linear and non-linear loads, harmonics, transient conditions, and waveform distortions.
• High-Speed Smart Control: SmartSource Suite for real-time test automation and remote monitoring.

High-Power AC/DC Load Simulator with PHIL Interface

• Scalable Power Density: Available in 30kVA/kW, 45kVA/kW, and 55kVA/kW models, with parallel cabinets up to 550kVA/kW.
• Versatile AC/DC Load Capability: Supports single-phase, split-phase, three-phase, and multi-channel configurations.
• Dual Constant Power Voltage Ranges:
  • AC Voltage: 5-220V L-N / 9-380V L-L & 5-440V L-N / 9-760V L-L
  • DC Voltage: 0-335Vdc & 9-650Vdc
• Advanced PHIL Interface (Option H): High-speed analog I/O for real-time frequency, voltage, and current control.
• Regenerative Power Efficiency: Returns over 90% of absorbed energy back to the grid, reducing operational costs & heat dissipation.
• Dynamic Load Simulation: Simulates harmonics, transient conditions, and waveform distortions for real-world power testing.
• SmartSource Suite for Remote Control: Web-based monitoring and test automation via LAN, USB, GPIB, and RS232.