Products

The Hioki 3269 Power Supply is a four-channel unit designed to provide stable power to Hioki flat bandwidth AC/DC current probes, including the 3273-50 to 3276 series, CT6700, and CT610 series. It enables accurate current measurement output for Memory HiCorders, oscilloscopes, and other data acquisition instruments.

Key Features

• Supplies power to Hioki current probes 3273-50 to 3276, CT6700, CT610 series
• Four-channel power output for multi-probe setups
• Compatible with Memory HiCorders and oscilloscopes
• Output voltage: ±12 V ±0.5 V, maximum 2.5 A (total of all channels)
• Compact and lightweight design: 80 × 119 × 200 mm, 1.1 kg
• Wide AC input range: 100–240 V AC, 50/60 Hz, 170 VA max
• Simple integration into data acquisition setups
• Note: Requires compatible current sensor to operate

Reliable, flexible, and programmable power delivery for bench, system, and ATE applications.

Key Features:

• PowerFlex technology for variable V/A within power limits
• Up to 60V and 20A, 180W or 420W per output
• Dual or single isolated outputs
• CV or CC operation with settings lock (S-Lock)
• Selectable OVP trips and remote sense terminals
• RS232, USB, LAN/LXI standard on P models
• GPIB available as option (P models only)
• Compact, rugged 3U quarter or half rack design
• Analog remote control (CPX400SA model)

The EASY-DRIVER Power Supply is a compact digital bipolar power supply series designed for precise current control and flexible integration in laboratory and industrial environments. Delivering up to 200 W output power, this highly configurable unit combines advanced digital control with reliable Ethernet connectivity for seamless monitoring and operation. With multiple output configurations and low noise performance, the EASY-DRIVER Power Supply provides a cost effective and high performance solution for powering sensitive electronic loads.

Key Features

• Compact bipolar digital power supply with output power up to 200 W
• Multiple output ratings including ±1 A at ±12 V, ±2 A at ±20 V, ±5 A at ±20 V and ±10 A at ±20 V
• Digital current control loop for precise and stable operation
• Low noise and high bandwidth output performance
• Ethernet connectivity with TCP IP and UDP communication
• Multi DSP architecture for reliable digital signal processing
• Local display for output current and voltage monitoring
• LED indicators for real time system status
• Built in protections including over voltage and over temperature
• External interlock signal and inductive load discharge circuitry
• Compatible with laboratory equipment and standalone installations

Compact and quiet bench power supply with precision linear regulation and a range of output options for lab or system use.

Key Features:

• Linear regulated bench DC power supply
• Single, dual, and triple output options
• Up to 56V and 5A with up to 130W output
• 4-digit voltage and current display per output
• Constant voltage or constant current operation
• Switchable local/remote sensing
• Silent, fan-free convection cooling
• Compact design saves bench space
• Optional RS232 or USB interfaces (on select models)
• Auxiliary output (1.5–5V/2A) on EL302RT

A versatile bench power supply series with mixed-mode regulation, ideal for lab or system environments.

Key Features:

• Single, dual, or triple outputs with up to 420W power
• Output ranges: 18V/10A, 20V/20A, 35V/5A, 42V/10A
• Dual model: 2×35V/4A or 150V/2A (combined)
• Triple model includes 1.5–5V/5A auxiliary output
• Independent 4-digit meters for each output
• Local or remote sensing with constant V or I modes
• Silent, fan-free operation for most models
• Compact, space-saving design
• RS232 or USB interfaces on select models

The FAST-PS-1K5 Power Supply is a high performance bipolar digital power supply designed for demanding laboratory, industrial and research applications. Delivering up to 1.5 kW of output power, this advanced system provides precise current and voltage control along with integrated monitoring tools and flexible communication interfaces. With digital control architecture, built in web server functionality and high stability sensing technology, the FAST-PS-1K5 Power Supply offers a reliable solution for battery testing, superconducting magnet systems and advanced power electronics applications.

Key Features

• High performance bipolar digital power supply with power ratings up to 1.5 kW
• Accurate current and voltage control for precision power applications
• Output models available up to 100 A and 100 V
• Digital control loop for flexible configuration and load adaptation
• Integrated web server for monitoring and system configuration
• Built in waveform generation and triggering capabilities
• Four channel oscilloscope monitoring at 100 ksps
• High precision current sensing using 0 FLUCS DCCT technology
• Gigabit Ethernet connectivity with additional SFP communication slots
• Optional four quadrant operation with dedicated external crate
• Quench protection support for superconducting magnet systems
• Local display and interface for monitoring voltage and current

The FAST-PS-M Power Supply is a high performance monopolar digital power supply designed for applications that require stable current and voltage control. With output power up to 900 W, this advanced power system integrates a digital control loop, embedded web server and built in waveform and monitoring tools. Its high precision sensing technology and fast communication interfaces make the FAST-PS-M Power Supply an ideal solution for research laboratories, industrial test systems and precision electronics applications.

Key Features

• High performance monopolar digital power supply with output power up to 900 W
• Precise current and voltage control with digital regulation
• Built in Arbitrary Waveform Generator operating at 100 ksps
• Integrated four channel oscilloscope with high precision monitoring
• Embedded web server interface for configuration and control
• High speed Ethernet connectivity with 10/100/1000 Mbit support
• Dual SFP communication slots for fast feedback and system integration
• Low noise output and high bandwidth performance
• High precision sensing using 0 FLUCS current transducer technology
• Local colour display and interface for monitoring and configuration
• Internal protections including over voltage and over current protection
• Optional analog control input for amplifier compatibility

Compact, versatile, and efficient, the FX Series is ideal for test labs, R&D, and educational use.

Key Features:

• PowerFlex autoranging outputs (up to 105W per channel)
• Dual or triple output models (210W or 246W total)
• SELV compliant and high safety design
• Rotary, touch, and USB control options
• Low ripple noise (<2mV), high resolution (1mV/1mA)
• Voltage tracking and simultaneous V/I control
• Remote USB interface with SCPI protocol
• 25 user-defined memory presets
• Switchable remote sense & intelligent cooling
• Includes Test Bridge software for logging & automation

The Aim-TTi LD400 Series DC Electronic Load is a versatile and high-performance solution for testing DC power supplies, batteries, and converters. With precise control, multiple operating modes, and advanced transient testing, it ensures dependable and accurate performance for laboratory and production environments.

Key Features:

• Wide operating range: 0–80V and 0–80A
• 400W continuous and 600W short-term power dissipation
• Multiple modes: constant current, voltage, resistance, conductance, and power
• Operates at <1V for high-current testing up to 40A
• Built-in transient generator with variable slew rate
• High accuracy with fine-level setting resolution
• Variable drop-out voltage for battery discharge testing
• Graphical LCD with intuitive soft-key control
• Analog and TTL remote control functions
• USB, RS232, and LAN (LXI) interfaces; optional GPIB (LD400P)
• Front and rear input terminals for flexible connections

The industry’s highest-resolution portable TDR cable tester, the MOHR CT100 delivers unmatched accuracy for coaxial and twisted-pair cables in the field, lab, or production floor.

Key Features:

• Resolves connector details < 1 cm (8–10x sharper than competitors)
• Tests coaxial, twisted-pair, and multi-conductor cables
• Exceeds Tektronix® 1502C TDR specifications
• Accurate impedance and cable length measurement with 16-bit ADC
• Detects intermittent faults with up to 250,000 samples/sec
• Integrated LAN/WAN/Internet remote control with CT Viewer™ 2 software
• Lightweight, portable design with 4.3″ color LCD
• Used by the U.S. Navy as the Tektronix 1502 series replacement

• Three or four high performance outputs each with full functionality
• Range switching gives variable voltage/current combinations
• Shared power mode provides double power from a single output
• Low output noise and ripple via linear final regulation
• High setting resolution of up to 1mV and 0.1mA
• Variable OVP and OCP trips on all outputs which can be linked (MX-Q Series 2 units only)
• Individual or combined output on/off control with programmable delay sequencing.
• Selectable voltage tracking (isolated tracking)
• Selectable current meter averaging
• Switchable remote sense capability
• Graphic LCD (colour on Series 2) provides simultaneous output metering
• Numeric or spin-wheel control of all parameters
• 50 setting memories per output plus 50 linked memories
• 3U rack case for bench or rack mounting (4U rack kit accessory available)
• RS-232, USB and LAN (LXI) interfaces (P models)
• GPIB option (P models only)
• Duplicate power & sense terminals at rear (P models)
• Software control from Test Bridge software (free download – P models only)

Series 2 (“S2”) models add:

• Colour display
• Enhanced channel power sharing
• ‘TripLink’ feature: Link channels to trip together on OVP or OCP
• New MX103Q SELV Model

The NGPS Power Supply is a high stability digital power supply series designed for demanding industrial and scientific applications. Delivering up to 10 kW of output power and scalable up to 40 kW through parallel operation, this advanced system provides precise current and voltage control with exceptional temperature stability. Equipped with Gigabit Ethernet connectivity, an embedded web server, waveform generation capability and a built in oscilloscope, the NGPS Power Supply offers a powerful and flexible solution for laboratories, research facilities and high performance power systems.

Key Features

• High stability digital power supply with output power up to 10 kW
• Parallel operation capability allowing up to 40 kW system power
• Precise current and voltage control using advanced digital architecture
• Temperature stabilized internal section for extremely low drift
• High speed 10/100/1000 Mbit Ethernet communication
• Ultra fast SFP interface supporting update rates up to 100 kHz
• Embedded Linux operating system with web based configuration interface
• Built in Arbitrary Waveform Generation for custom signal control
• Integrated four channel oscilloscope for real time monitoring
• Remote sensing terminals for accurate voltage control at the load
• Optional analog control input for compatibility with legacy systems
• Low noise and high efficiency performance for demanding applications

The Aim-TTi PL Series DC Power Supply combines precision, flexibility, and reliability in a compact linear regulated design. Available in single, dual, and triple output configurations, it delivers exceptional control and accuracy for laboratory, R&D, and testing environments.

Key Features:

• Single, dual, or triple output models
• Voltage range from 6V/8A to 60V/1.5A
• High-performance linear regulation for low noise
• Compact and space-saving design
• True analog controls for smooth operation
• S-Lock function to instantly lock settings
• V-Span feature to customize voltage range
• Low current measurement and meter averaging
• Selectable remote sense terminals
• Independent, Isolated Tracking, and True Parallel modes
• High current, low voltage output on triple models
• Optional interfaces: RS-232, USB, LAN (LXI), and GPIB
• Analog remote control of voltage and current (single output only)

The Polarity Inverters series provides a reliable solution for switching the output polarity of high power converters. Designed to work seamlessly with monopolar power supplies such as NGPS systems, these polarity switching units support current ratings up to 1000 A and voltage up to 250 V. With integrated safety interlocks and enabling signals, the system ensures secure polarity inversion for demanding industrial and scientific applications.

Key Features

• Reliable polarity switching for power converters up to 1000 A
• Maximum voltage rating of 250 V for high power applications
• Compatible with monopolar power supplies including NGPS systems
• Available in multiple current ratings including 200 A, 420 A, 630 A and 1000 A
• Auxiliary AC power input from 100 to 240 VAC at 50 or 60 Hz
• Integrated interlock and enabling signals for safe switching operations
• Supports control signals up to 240 V at 16 A and 10 A
• Designed for applications requiring polarity reversal such as magnet degaussing
• Standard rack mounting design with 19 inch enclosure options
• Durable industrial construction for reliable long term operation

The PS1112S Power Supply is a compact low noise power supply designed to deliver stable 12 V output for sensitive measurement and instrumentation systems. Built with a mixed switching linear architecture, this high efficiency unit ensures extremely low ripple and noise levels that help maintain measurement accuracy. With a maximum output power of 14 W and a robust stainless steel enclosure, the PS1112S Power Supply is an ideal solution for powering precision electronic devices and scientific instruments.

Key Features

• Low noise fixed voltage power supply with stable 12 V output
• Maximum output power of 14 W for precision electronic systems
• Maximum output current of 1.2 A depending on input conditions
• Mixed switching linear power architecture for low noise performance
• Extremely low ripple and noise in the DC to 1 MHz frequency range
• Compact and durable stainless steel enclosure
• Designed for accurate measurement and instrumentation systems
• High efficiency design while maintaining low noise operation
• Suitable for powering electrometers and precision measurement devices
• Optimized for laboratory and research equipment applications

The PS1215 Power Supply is a compact, high-precision dual-voltage power supply delivering ±15 V output for sensitive instrumentation. Engineered with a mixed switching-linear design, it ensures ultra-low noise performance for high-accuracy devices, particularly the 0-FLUCS current transducer series. Housed in a robust stainless steel enclosure, it provides 27 W of clean power while minimizing cable-related noise pickup, making it ideal for laboratory and research applications.

Key Features

• Dual-voltage output: ±15 V for precision instruments
• Maximum output power: 27 W with AC derating
• Ultra-low noise: 0.001 % for clean DC operation
• Mixed switching-linear design for efficiency and low ripple
• Compact and durable stainless steel enclosure
• Compatible with 0-FLUCS DC Current Transducer series
• Two cable options for voltage-output or current-output transducers
• Ideal for high-precision DCCT measurements
• Reduces cable length noise pickup for sensitive setups
• Optimized for laboratory and high-accuracy instrumentation