Products

Precision, performance, and scalability packed into a high-efficiency DC power solution. Ideal for demanding test environments and energy recovery.

Key Features:

• Output voltage: 0–240 V DC
• Scalable from 27 kW to 2000+ kW
• Modular build: up to 44 connected units
• Full sink/source operation with regeneration
• Ultra-fast switching: rise/fall time <250 µs
• Accuracy: <0.02% FS with high-res current range
• Auto-ranging capability (factor of 3)
• Control modes: CV, CC, CP, CR, Ri-Sim
• Seamless waveform generation via AnyWave + WaveMaster
• Optional HMI touchscreen and CAN interface

High-speed, modular AC power supply with precision control and full regeneration. Perfect for grid simulation, HIL testing, and EMC validation.

Key Features:

• Power scalable from 30 kVA to 1050+ kVA
• Voltage range: 0–305 V AC with 4 active outputs
• True 4-quadrant regenerative design for energy efficiency
• Ultra-fast switching time (≤200 µs response)
• High current accuracy <0.02% full scale
• Full digital control modes: CV, CC, CP, CR, Ri-Sim
• Programmable grid simulator, AC amplifier, or electronic RLC load
• Compatible with AnyWave & WaveMaster for custom waveform control
• Modular 19” rack-mounted units with low heat and noise output
• Ideal for automotive, aerospace, HIL, EMC, and renewable power testing

A precision-driven, regenerative DC power supply ideal for high-demand testing environments across industries.

Key Features:

• Voltage range: 0 to 320 V DC
• Power output: 36 to 2000+ kW
• Modular and scalable up to 44 units
• Regenerative sink and source operation
• Voltage rise/fall time <250 µs
• Accuracy <0.02% FS with high-res current range
• Auto-ranging factor of 3
• Full digital control: CV, CC, CP, CR, Ri-Sim
• Supports AnyWave + WaveMaster waveform control
• Optional touchscreen HMI and CAN interface

Advanced regenerative DC power supply with full sink/source capability, ultra-fast dynamics, and exceptional precision for demanding applications.

Key Features:

• Scalable from 9 kW to 2000+ kW
• Precise voltage range: 0–60 V DC
• Sink/source mode with full power regeneration
• Exceptional current accuracy <0.02% full scale
• Fast voltage rise/fall times under 250 µs
• Full digital control: CV, CC, CP, CR, Ri-Sim
• Modular setup: parallel, series, or mixed mode
• Auto-ranging factor of 3 for wide flexibility
• Supports CAN, API, and optional HMI touchscreen
• Seamless waveform generation via AnyWave + WaveMaster
• Ideal for automotive, aerospace, HIL, and EMC testing

High-efficiency regenerative DC power supply with scalable architecture and ultra-fast switching. Ideal for demanding test environments.

Key Features:

• Voltage range: 0–80 V DC
• Power scalable from 9 kW to 2000+ kW
• Modular: Up to 44 units (parallel, series, combined)
• Full sink/source mode with energy recovery
• Voltage rise/fall time <250 µs
• Current accuracy <0.02% FS
• Auto-ranging with a factor of 3
• Digital control: CV, CC, CP, CR, Ri-Sim
• User-friendly software and HMI options
• AnyWave + WaveMaster for waveform control
• CAN, API, and high-speed bus support

The Hioki AC Flexible Current Sensor CT7040 Series is designed for accurate measurement of large AC currents in tight, crowded, or complex wiring environments. With flexible Rogowski-style loops, support for currents up to 6000 A, and multiple loop size options, the CT7040 series is ideal for site inspections, power analysis, and long-term current monitoring when paired with a Hioki display unit.

Key Features

• Measures large AC currents up to 6000 A
• Flexible loop design for confined and complex wiring
• Wide frequency range from 10 Hz to 50 kHz
• Available in three loop diameters for application flexibility
• CAT IV 600 V and CAT III 1000 V safety ratings
• Supports waveform, RMS, peak, and frequency output modes
• Compatible with Hioki Memory HiCorders, data loggers, and oscilloscopes via display unit

The Hioki AC Flexible Current Sensor CT9667 is a Rogowski-type AC current sensor designed for fast, accurate measurement of large currents in confined and complex wiring environments. With flexible loop options, high current capacity up to 5000 A, and compatibility with Hioki power meters and Memory HiCorders, the CT9667 series is ideal for industrial power analysis, equipment diagnostics, and on-site electrical inspections.

Key Features

• Measures large AC currents up to 5000 A
• Flexible Rogowski loop design for tight or crowded wiring
• Extra-thin cables on select models for easier routing
• Wide frequency range from 10 Hz to 20 kHz
• Available in three loop diameters for application flexibility
• CAT IV 600 V and CAT III 1000 V safety ratings
• Direct BNC output for power meters and Memory HiCorders

A modular, scalable, and intelligent matrix switching system designed for precision in multi-channel test applications.

Key Features:

• Modular design with up to 4 plugin switch cards
• 6×32 channel matrix, up to 2A per channel
• Remote control via TCP/IP interface
• Integrated diagnostics & safety monitoring
• Compatible with LabView, Python, C++, CANoe, and more
• Auto-cooling with smart fan activation
• Rack-mountable 4HU chassis with high build quality
• Expandable switching lines with CU-600 matrix
• Unlimited waveform size with dual waveform output
• Protocol generation and oscilloscope waveform simulation

The complete turnkey solution for testing high-voltage transient emissions and immunity under ISO 7637-4 standards.

Key Features:

• Full ISO 7637-4 compliance
• Pulse A: Switching noise simulation (100 kHz–10 MHz)
• Pulse B: Low-frequency sinusoidal testing (3 kHz–300 kHz)
• 75W high-power RF amplifier for clean signal output
• Configurable burst generation (1–1000 cycles)
• Galvanically isolated digital I/O and EUT interlock
• Scalable and modular hardware for custom test setups
• Integrated overvoltage and transient protection
• WaveMaster software with graphical waveform creation
• Compatible with LabView, Python, C++, and more

The CAR AWG 6000 is a high-performance, 4-quadrant battery simulator designed for EMC testing on vehicle supply lines. This powerful unit delivers precise voltage variations up to ±70V and 200A, compliant with international automotive standards.

Key Features:

• 4-quadrant voltage/current amplifier
• Battery simulation up to ±70V and 200A
• Compliant with ISO 7637-2, LV 124, LV 148, and more
• Arbitrary waveform generation at 20MSa/s, 16kSa
• Bandwidth up to 1 MHz for small signals
• Simulates pulse 2b, pulse 4, crank profiles, and AC ripple
• Selectable output impedance: 0–200 mΩ
• Overvoltage and overcurrent protection
• Integrated impulse recording function (IRF)
• Remote control via CAR-Remote software and Ethernet

A powerful battery simulator designed for high-voltage automotive testing up to 1500V. Compact, efficient, and ISO 7637-4:2020 compliant.

Key Features:

• Output voltage up to 1500V DC
• Supports 30A at 500V, 10A at 1500V
• Constant power delivery of 15kW
• Slew rate up to 100V/µs for rapid rise time
• Remote PC control via CAR-Remote software
• Parallel stacking up to 10 units (100A total)
• Compliant with ISO 7637-2, ISO 7637-4, FMC1280
• Compact desktop design with built-in Ethernet
• Robust overvoltage and overcurrent protection

The Hioki Clamp On Leak Sensor 9657-10 is a versatile voltage output sensor designed for general purpose leak current testing as well as load current measurement. Using a high-permeability magnetic core and shielding structure, it delivers accurate and stable measurement of weak AC currents. This makes it an excellent choice for insulation fault checks, grounding inspections, and routine electrical maintenance.

Key Features

• Designed for general purpose leak current testing
• Supports both leak current and load current measurement
• High accuracy voltage output for reliable diagnostics
• Ideal for identifying insulation faults and grounding issues
• Compatible with power quality analyzers and data recorders
• Clamp design suitable for insulated conductors

The Hioki Clamp On Leak Sensor 9675 is a high-accuracy voltage output sensor designed for reliable leak current measurement on insulated conductors. Built with a high-permeability magnetic core and magnetic shielding, it enables stable and precise detection of extremely small AC leak currents. This sensor is ideal for grounding inspections, insulation fault checks, and preventive electrical maintenance in industrial and commercial environments.

Key Features

• High accuracy of ±1.0 percent for reliable leak current detection
• Designed specifically for AC leak current measurement at 50 Hz and 60 Hz
• Ideal for testing ground conductors and identifying insulation faults
• High-permeability magnetic core for measuring very weak currents
• Voltage output compatible with power quality analyzers and recorders
• Compact, lightweight clamp design for easy field use

The Hioki Clamp On Sensor 9272-05 is a high-accuracy AC current sensor designed for precise measurement of low-frequency currents in inverter-controlled equipment. With excellent phase accuracy and a wide frequency range from 1 Hz to 100 kHz, it is ideal for harmonic analysis, FFT analysis, and waveform observation when used with compatible power meters, power analyzers, or Memory HiCorders.

Key Features

• Optimized for low-frequency AC current measurement in inverter systems
• Wide frequency bandwidth from 1 Hz to 100 kHz for waveform and harmonic analysis
• High amplitude and phase accuracy for precise power and efficiency testing
• Selectable 20 A and 200 A AC measurement ranges
• Designed for use with power analyzers, Memory HiCorders, and sensor units
• CAT III 600 V rated for safe industrial and laboratory measurements
• Large clamp diameter suitable for thicker conductors

The Hioki Clamp On Sensor 9660 is a 100 A AC voltage output clamp sensor designed for accurate load current measurement in industrial and commercial applications. Compatible with power meters, PQAs, and data acquisition systems, it delivers reliable readings in narrow or constrained spaces.

Key Features

• Measures AC load current up to 100 A
• High accuracy: ±0.3% amplitude, ±1° phase
• Compact design fits conductors up to 15 mm
• Voltage output compatible with power meters and PQAs
• Ideal for inverter devices and commercial power lines
• Easy connection via 3-meter cord with BNC output

The Hioki Clamp On Sensor 9661 is a 500 A AC voltage output clamp sensor designed for precise load current measurements in industrial and commercial applications. Compatible with power meters, PQAs, and other data acquisition equipment, it ensures accurate readings in constrained spaces.

Key Features

• Measures AC load current up to 500 A
• High accuracy: ±0.3% amplitude, ±0.5° phase
• Compact design fits conductors up to 46 mm
• Voltage output compatible with power meters and PQAs
• Ideal for inverter devices and commercial power lines
• Easy connection via 3-meter cord with BNC output