Products

The Hioki 3269 Power Supply is a four-channel unit designed to provide stable power to Hioki flat bandwidth AC/DC current probes, including the 3273-50 to 3276 series, CT6700, and CT610 series. It enables accurate current measurement output for Memory HiCorders, oscilloscopes, and other data acquisition instruments.

Key Features

• Supplies power to Hioki current probes 3273-50 to 3276, CT6700, CT610 series
• Four-channel power output for multi-probe setups
• Compatible with Memory HiCorders and oscilloscopes
• Output voltage: ±12 V ±0.5 V, maximum 2.5 A (total of all channels)
• Compact and lightweight design: 80 × 119 × 200 mm, 1.1 kg
• Wide AC input range: 100–240 V AC, 50/60 Hz, 170 VA max
• Simple integration into data acquisition setups
• Note: Requires compatible current sensor to operate

Reliable, flexible, and programmable power delivery for bench, system, and ATE applications.

Key Features:

• PowerFlex technology for variable V/A within power limits
• Up to 60V and 20A, 180W or 420W per output
• Dual or single isolated outputs
• CV or CC operation with settings lock (S-Lock)
• Selectable OVP trips and remote sense terminals
• RS232, USB, LAN/LXI standard on P models
• GPIB available as option (P models only)
• Compact, rugged 3U quarter or half rack design
• Analog remote control (CPX400SA model)

The EASY-DRIVER Power Supply is a compact digital bipolar power supply series designed for precise current control and flexible integration in laboratory and industrial environments. Delivering up to 200 W output power, this highly configurable unit combines advanced digital control with reliable Ethernet connectivity for seamless monitoring and operation. With multiple output configurations and low noise performance, the EASY-DRIVER Power Supply provides a cost effective and high performance solution for powering sensitive electronic loads.

Key Features

• Compact bipolar digital power supply with output power up to 200 W
• Multiple output ratings including ±1 A at ±12 V, ±2 A at ±20 V, ±5 A at ±20 V and ±10 A at ±20 V
• Digital current control loop for precise and stable operation
• Low noise and high bandwidth output performance
• Ethernet connectivity with TCP IP and UDP communication
• Multi DSP architecture for reliable digital signal processing
• Local display for output current and voltage monitoring
• LED indicators for real time system status
• Built in protections including over voltage and over temperature
• External interlock signal and inductive load discharge circuitry
• Compatible with laboratory equipment and standalone installations

Compact and quiet bench power supply with precision linear regulation and a range of output options for lab or system use.

Key Features:

• Linear regulated bench DC power supply
• Single, dual, and triple output options
• Up to 56V and 5A with up to 130W output
• 4-digit voltage and current display per output
• Constant voltage or constant current operation
• Switchable local/remote sensing
• Silent, fan-free convection cooling
• Compact design saves bench space
• Optional RS232 or USB interfaces (on select models)
• Auxiliary output (1.5–5V/2A) on EL302RT

A versatile bench power supply series with mixed-mode regulation, ideal for lab or system environments.

Key Features:

• Single, dual, or triple outputs with up to 420W power
• Output ranges: 18V/10A, 20V/20A, 35V/5A, 42V/10A
• Dual model: 2×35V/4A or 150V/2A (combined)
• Triple model includes 1.5–5V/5A auxiliary output
• Independent 4-digit meters for each output
• Local or remote sensing with constant V or I modes
• Silent, fan-free operation for most models
• Compact, space-saving design
• RS232 or USB interfaces on select models

The FAST-PS-1K5 Power Supply is a high performance bipolar digital power supply designed for demanding laboratory, industrial and research applications. Delivering up to 1.5 kW of output power, this advanced system provides precise current and voltage control along with integrated monitoring tools and flexible communication interfaces. With digital control architecture, built in web server functionality and high stability sensing technology, the FAST-PS-1K5 Power Supply offers a reliable solution for battery testing, superconducting magnet systems and advanced power electronics applications.

Key Features

• High performance bipolar digital power supply with power ratings up to 1.5 kW
• Accurate current and voltage control for precision power applications
• Output models available up to 100 A and 100 V
• Digital control loop for flexible configuration and load adaptation
• Integrated web server for monitoring and system configuration
• Built in waveform generation and triggering capabilities
• Four channel oscilloscope monitoring at 100 ksps
• High precision current sensing using 0 FLUCS DCCT technology
• Gigabit Ethernet connectivity with additional SFP communication slots
• Optional four quadrant operation with dedicated external crate
• Quench protection support for superconducting magnet systems
• Local display and interface for monitoring voltage and current

The FAST-PS-M Power Supply is a high performance monopolar digital power supply designed for applications that require stable current and voltage control. With output power up to 900 W, this advanced power system integrates a digital control loop, embedded web server and built in waveform and monitoring tools. Its high precision sensing technology and fast communication interfaces make the FAST-PS-M Power Supply an ideal solution for research laboratories, industrial test systems and precision electronics applications.

Key Features

• High performance monopolar digital power supply with output power up to 900 W
• Precise current and voltage control with digital regulation
• Built in Arbitrary Waveform Generator operating at 100 ksps
• Integrated four channel oscilloscope with high precision monitoring
• Embedded web server interface for configuration and control
• High speed Ethernet connectivity with 10/100/1000 Mbit support
• Dual SFP communication slots for fast feedback and system integration
• Low noise output and high bandwidth performance
• High precision sensing using 0 FLUCS current transducer technology
• Local colour display and interface for monitoring and configuration
• Internal protections including over voltage and over current protection
• Optional analog control input for amplifier compatibility

Compact, versatile, and efficient, the FX Series is ideal for test labs, R&D, and educational use.

Key Features:

• PowerFlex autoranging outputs (up to 105W per channel)
• Dual or triple output models (210W or 246W total)
• SELV compliant and high safety design
• Rotary, touch, and USB control options
• Low ripple noise (<2mV), high resolution (1mV/1mA)
• Voltage tracking and simultaneous V/I control
• Remote USB interface with SCPI protocol
• 25 user-defined memory presets
• Switchable remote sense & intelligent cooling
• Includes Test Bridge software for logging & automation

The Hioki 3153 HiTESTER is an all-in-one solution for insulation resistance and AC/DC voltage withstand testing. It is fully programmable for automated multi-point testing, making it ideal for industrial, manufacturing, and electrical safety applications.

Key Features

• Programmable insulation testing from 50 V to 1200 V DC
• Dielectric strength testing for AC/DC voltages up to 5 kV
• Store and program up to 32 test files with 50 steps each
• Optional scanner for automatic multi-point testing
• Accurate voltage generation via PWM method, independent of supply voltage
• Ramp timer function for controlled voltage rise/fall during testing
• Digital display of measured voltage, current, and resistance
• Compact design with full remote operation capability

The Hioki 3930 High Voltage Scanner is a passive auxiliary device designed to streamline multi-point high-voltage testing when paired with the Hioki 3153 or a sequencer. Its isolated channels allow safe and efficient AC/DC voltage testing while minimizing connection changes, making it ideal for industrial testing and quality control applications.

Key Features

• Supports AC/DC high-voltage output up to 5 kV
• Multi-point testing: 8 channels per unit, up to 32 channels with 4 connected units
• Fully isolated HV I/O, control lines, and power supply
• Operates in multi-mode or single-mode scanning for flexible testing
• Compatible with Hioki 3153 program function or standard sequencer
• Fast operation with <6 ms response and recovery time
• Includes HV test leads, control connector cable, and grounding cable

The Hioki BT5525 Tester is engineered for battery production lines to detect microscopic insulation defects and contamination before shipment. It ensures safety, reduces false negatives, and accelerates high-speed testing, making it ideal for modern battery manufacturing.

Key Features

• Proprietary BDD function detects minuscule internal short-circuits caused by contamination
• Stable insulation resistance testing even in noisy environments
• Contact check function prevents erroneous judgments
• Maximum test voltage of 500 V for battery cell, module, and pack testing
• High-speed charging up to 50 mA and discharging up to 40 mA for faster testing
• Compact design allows integration into battery production systems
• Cost-effective solution for small to large battery cells and packs
• PC application for waveform review and CSV data export

The Hioki IR5050 High Voltage Insulation Tester delivers precise and reliable insulation resistance testing up to 5 kV and 10 TΩ. Designed for professionals, it offers advanced diagnostics, wireless connectivity, and rugged durability — making it ideal for industrial maintenance and electrical testing.

Key Features:

• Measures insulation resistance up to 10 TΩ
• Test voltages from 250 V to 5000 V DC
• Calculates and displays PI, DAR, and DD diagnostics automatically
• Supports both wireless (Bluetooth) and USB data transfer
• Compact, lightweight design with IP65-rated carrying case
• Step and ramp voltage testing for advanced insulation analysis
• CAT IV and CAT III safety ratings for enhanced protection
• Compatible with GENNECT Cross app for real-time reporting

Key Features:

• Safely measure solar PV insulation resistance while generating power
• CAT III 2000 V and CAT IV 1000 V safety rating for reliable high-voltage testing
• 5 kV test voltage and 10 TΩ insulation resistance range
• Specialized PV insulation measurement mode compliant with IEC 62446-1
• Automatically calculates and displays PI, DAR, and DD diagnostics
• Flexible voltage adjustment from 250 V to 5000 V
• Data memory with wireless and USB connectivity options
• Compact, lightweight design with IP65-rated carrying case for durability

Key Features:

• Fastest insulation tester in the industry with results in as little as 50 ms
• Wide test voltage range: 25 V to 1000 V with 1 V resolution
• Quick residual voltage discharge for faster takt times
• Contact check function prevents false readings from poor connections
• Short-circuit check detects micro-shorts before testing
• Built-in LAN and RS-232C for system integration
• Compact, lightweight design ideal for battery and production line testing
• Models available: ST5520 (I/O output) and ST5520-01 (BCD output)

The Aim-TTi LD400 Series DC Electronic Load is a versatile and high-performance solution for testing DC power supplies, batteries, and converters. With precise control, multiple operating modes, and advanced transient testing, it ensures dependable and accurate performance for laboratory and production environments.

Key Features:

• Wide operating range: 0–80V and 0–80A
• 400W continuous and 600W short-term power dissipation
• Multiple modes: constant current, voltage, resistance, conductance, and power
• Operates at <1V for high-current testing up to 40A
• Built-in transient generator with variable slew rate
• High accuracy with fine-level setting resolution
• Variable drop-out voltage for battery discharge testing
• Graphical LCD with intuitive soft-key control
• Analog and TTL remote control functions
• USB, RS232, and LAN (LXI) interfaces; optional GPIB (LD400P)
• Front and rear input terminals for flexible connections

• Three or four high performance outputs each with full functionality
• Range switching gives variable voltage/current combinations
• Shared power mode provides double power from a single output
• Low output noise and ripple via linear final regulation
• High setting resolution of up to 1mV and 0.1mA
• Variable OVP and OCP trips on all outputs which can be linked (MX-Q Series 2 units only)
• Individual or combined output on/off control with programmable delay sequencing.
• Selectable voltage tracking (isolated tracking)
• Selectable current meter averaging
• Switchable remote sense capability
• Graphic LCD (colour on Series 2) provides simultaneous output metering
• Numeric or spin-wheel control of all parameters
• 50 setting memories per output plus 50 linked memories
• 3U rack case for bench or rack mounting (4U rack kit accessory available)
• RS-232, USB and LAN (LXI) interfaces (P models)
• GPIB option (P models only)
• Duplicate power & sense terminals at rear (P models)
• Software control from Test Bridge software (free download – P models only)

Series 2 (“S2”) models add:

• Colour display
• Enhanced channel power sharing
• ‘TripLink’ feature: Link channels to trip together on OVP or OCP
• New MX103Q SELV Model