Products

The SR-2 Standard Resistor is a high-precision calibration box designed for accurate verification of super megohmmeters. Featuring 24 ultra-precision resistors in a sealed metal enclosure, it supports stable calibration across a wide resistance range under high-voltage conditions.

Key Features

• Designed for calibration of super megohmmeters
• Resistance range from 1 M to 10,000 MΩ in 24 selectable points
• Supports calibration up to 1,000 V DC
• Ultra-precision resistors housed in a sealed metal case
• Flexible terminal plate allows multiple connection combinations
• Ideal for laboratories, quality control, and instrument verification
• Supplied with inspection data sheet for traceability

The SW2001 High Voltage Multiplexer is a durable and reliable solution designed to simplify complex motor testing setups. It allows safe and seamless switching between high voltage testing and 4 terminal low voltage measurements, helping manufacturers improve efficiency, accuracy, and equipment protection across production lines.

Key Features

• Consolidates six motor tests into one multiplexer system
• Enables safe switching between high voltage and low voltage measurements
• Supports resistance, inductance, surge, hipot, insulation resistance, and partial discharge tests
• Available in 4, 8, and 16 channel configurations
• Reduces test time and manual reconnections
• Protects low voltage instruments from stored energy damage
• Designed for long service life with high durability relays

T3DMM Series – Digital Multimeters deliver precision, speed, and display-rich features, ideal for professional labs, R&D, and production testing.

Key Features:

• Available in 4.5-digit (60,000 counts) and 6.5-digit (2,200,000 counts) models
• True RMS AC voltage and current measurement
• 4.3” TFT-LCD with 480×272 resolution
• Multiple display modes: Number, Histogram, Trend Chart, Bar Meter, Statistics
• Advanced math functions: Max, Min, Avg, Std Dev, dBm/dB, Relative, Pass/Fail
• Supports remote operation via USB, LAN, SCPI commands
• Built-in cold terminal thermocouple compensation
• Wide range of measurements: Voltage, Current, Resistance, Capacitance, Frequency, Period, Temperature
• Internal 1GB storage and USB host for external data access
• User-friendly softkey interface and built-in help system

The VIR Generator U8794 is a high-precision signal generation unit designed to simulate sensor outputs for ECU inspection, component testing, and maintenance applications.

Key Features

• Generates DC voltage, DC current, and resistance simulation signals
• Ideal for ECU inspection, electronic component testing, and equipment maintenance
• Eight fully isolated output channels for safe multi-signal simulation
• High-accuracy resistance simulation with automatic current calculation
• Designed exclusively for use with Memory HiCorder MR8740 series
• Supports sensor simulation testing without physical sensors
• Compact and lightweight design for bench and field environments

The Waveform Generator U8793 is a plug-and-play module for Hioki Memory HiCorders that enables arbitrary waveform output and anomaly simulation for advanced testing scenarios.

Key Features

• Outputs arbitrary waveform signals on up to two channels
• Reproduces waveforms recorded with a Memory HiCorder up to 15 V
• Generates customized arbitrary waveforms up to 15 V output
• Built-in function generator and sweep function
• Isolated design between unit and outputs and between channels
• Supports anomaly simulation and scenario-based testing
• Includes Waveform Maker software for easy waveform creation
• Designed for use with compatible Hioki Memory HiCorder models

Wireless Adapter Z3210 instantly transforms Hioki measuring instruments into smart, Bluetooth®-enabled devices. This adapter eliminates manual data entry, supports instant report generation, and increases productivity through seamless wireless communication.

Key Features:

• Simple plug-in setup for Hioki-compatible instruments.
• Enables wireless Bluetooth® communication for real-time data transfer.
• Eliminates manual reporting and transcription errors.
• Compatible with the free GENNECT Cross app for report creation.
• Supports Excel® Direct Input for automatic data entry.
• Complies with wireless regulations in over 50 countries.
• Compact, lightweight, and easy to attach or detach.

High-Precision Current Measurement with BNC Connectivity

• Precision Current Sensing: ±1% accuracy ensures reliable real-time current monitoring.
• BNC Connector for Seamless Connectivity: Works with oscilloscopes, ADCs, spectrum analyzers, and power analyzers.
• Clamp-On Design for Non-Intrusive Measurement: Safely monitor live current flow without circuit disruption.
• 50 Ohm Termination Compatible: Output reduces by half when using a 50Ω termination.
• High-Voltage Safety Considerations: Conductive case requires adequate insulation for user safety.

Single Phase Power Meter Compatible with DC Measurement and Current/Power Integration Measurement

Key Features:

• Compatible with the SPECpower® (*1) benchmarking for server power consumption
• DC measurement mode, AC, and AC+DC measurement
• Integration function for current and power
• ±0.1% high basic accuracy (*2) For complete details, please refer to the specifications)
• Extended period of guaranteed accuracy of 3 years
• Complete accuracy over a wide input range

Key Features:

• Measure even harmonic waveform components using the True RMS method
  
• Expanded -25°C to 65°C operating temperature range
  
• Connect the CT6280 flexible sensor to measure up to 4199 A in thick or paired wires
  
• Drop proof design withstands drop from a height of 1 meter

• CAT IV 600 V, CAT III 1000 V
  When using P2000: CAT III 2000 V, CAT IV 1000 V
  
• Easily get into tight spaces between cables thanks to thin sensor with a minimum cross-section span of 11 mm
  
• Measure up to 2000 A AC
  
• AC A, AC and DC V, DC+AC V, resistance, frequency, and more
• Easily transfer measurement data to your smartphone or tablet by using our free app GENNECT Cross or to an Excel® file (*1)
• Harmonic analysis from 1st to 30th order with GENNECT Cross (*1)

Pencil-style Pocket Digital Multimeter for General Electrical Maintenance, Testing and Hobbyists

Key Features:

• Test lead and main unit in a single body
  
• Overload protection to 600 V at resistance or continuity functions
  
• LED light brightly illuminates test points

• Simply clip clamps onto wire insulation
  
• Green LED arrow clearly shows phase direction, perfect for visual reports
  
• CAT III 1000V
  
• Rotating LED indicator shows the phase sequence for a 3-phase power supply at a glance
  
• Intermittent beeps signal positive phase; continuous tone signals reverse phase
  
• Magnetic base allows the instrument to be secured on a distribution panel

Single Phase Power Meter for Production and Inspection Lines

Key Features of HiTESTER 3333 Single-Phase Power Meter:

• Ideal for replacing portable instruments, ±0.1% basic accuracy
• Extended period of guaranteed accuracy of 3 years
• 50mA to 20A AC current range (300 V Max., Accuracy guaranteed up to 30 A)
• Print out with the 9442 and RS-232C interface

Quantify composite layer resistance and interface resistance in Li-ion battery electrode sheets

The RM2610 Electrode Resistance Measurement System is an advanced tool designed for precise quantification of composite layer resistivity and interface resistance in Li-ion battery electrode sheets. Using cutting-edge inverse problem analysis, the system isolates and calculates resistance values critical for optimizing battery performance. Its intuitive design includes a constant current source and a multi-probe setup, enabling rapid measurements and detailed analysis.

With the ability to measure resistance variations caused by material properties, composition, and manufacturing conditions, the RM2610 accelerates the development of high-performance batteries. This system supports both positive and negative electrodes and provides visual insights into uniformity and density effects. Ideal for research and manufacturing environments, the RM2610 ensures reliable, accurate measurements essential for advancing lithium-ion battery technology.

Rapid 6.4ms Super Megohm and Low Current Testing

Key Features

• 300 times better noise resistance
• Max. 1000 V output: SM7110
• Max. 2 × 10^19 Ω display
• Min. 0.1 fA resolution
• Built-in EXT I/O, RS-232C, GP-IB and USB
• Flexible, Multipurpose Design, High Resistance
• Meter/Electrometer/Picoammeter/IR Meter
• Measure resistance of materials by combining with optional electrode

HDO4000A oscilloscopes have 4 analog input channels, 12-bit resolution using Teledyne LeCroy’s HD4096 high-definition technology, up to 1 GHz of bandwidth and a compact form factor with a large 12.1” multi-touch display. They are ideal for debug and troubleshooting of power electronics designs, digital power management or power integrity analysis, automotive electronics systems, and deeply embedded or mechatronic designs.