Products

The Hioki IM3523A LCR Meter is a high-speed, reliable measurement instrument designed for production lines, providing precision and efficiency at a competitive price point. Its contact check function ensures improved measurement reliability for consistent results.

Key Features

• Measurement accuracy: ±0.05% across DC to 200 kHz
• Rapid 2 millisecond test speed
• Wide measurement range: 5 mV to 5 V, 10 μA to 50 mA
• Continuous testing under mixed conditions (C-D 120 Hz, ESR 100 kHz)
• Built-in comparator and BIN classification functions
• Contact check for enhanced measurement reliability
• Multiple measurement parameters: Z, Y, θ, X, G, B, Q, Rdc, Rs, Rp, Ls, Lp, Cs, Cp, D (tanδ)
• Interfaces: USB, LAN, EXT I/O for automation

The Hioki IM3533 LCR Meter is a precision measurement instrument designed for R&D environments and transformer, winding, and coil manufacturing. It combines high accuracy, advanced inductance analysis, and built-in DC bias to support modern compliance and production testing.

Key Features

• Measurement range from DC and 1 mHz to 200 kHz
• High accuracy of ±0.05 percent across a wide signal range
• Built-in DC bias for HDMI compliance and real-world testing
• Dedicated modes for turn ratio, mutual inductance, and inductance difference
• Continuous testing across mixed conditions such as C-D and ESR
• High precision low impedance mode for low inductance and ESR testing
• Touch screen interface with intuitive operation
• Advanced frequency sweep testing available on IM3533-01
• Cable length compensation settings for improved accuracy

The Hioki IM3536 LCR Meter is a versatile, high-precision instrument designed for both R&D and production applications. With a broad frequency range and high-speed measurements, it ensures accurate evaluation of capacitors, inductors, and coils under real-world conditions.

Key Features

• Measurement frequency: DC, 4 Hz to 8 MHz (customizable up to 10 MHz)
• High-speed measurement: 1 millisecond per test
• High-precision accuracy: ±0.05% reading
• Low-impedance measurement from 1 mΩ with excellent repeatability
• DC bias function for simulating real-use conditions
• Ideal for evaluating capacitors, inductors, and power supply components
• Interfaces: USB, GP-IB, RS-232C for automated data collection
• Cost-effective solution for both R&D and production lines

The Hioki IM7580A is a compact, high-speed impedance analyzer for 1 MHz to 300 MHz testing, ideal for both production and R&D. It works seamlessly with the IM9201 SMD fixture for reliable component testing.

Key Features:

• 1 MHz to 300 MHz frequency range
• 0.5 ms test speed
• ±0.72% basic accuracy
• Compact half-rack size with palm-sized test head
• Reliable contact check functions
• Frequency, level, and time sweeps in Analyzer Mode
• RF I-V method for precise measurement

The Hioki IM7581 is a compact, high-speed impedance analyzer designed for accurate testing from 100 kHz to 300 MHz. It’s ideal for both production and development environments.

Key Features:

• 100 kHz to 300 MHz frequency range
• 0.5 ms fastest test speed
• ±0.72% basic accuracy
• Compact half-rack size, palm-sized test head
• Reliable contact check via DCR, Hi-Z reject, or waveform judgment
• Supports frequency, level, and time sweeps in Analyzer Mode
• Uses RF I-V method for precise measurement

The Hioki Impedance Analyzer IM7587 3 GHz provides precision, speed, and versatility for impedance measurements from 1 MHz to 3 GHz, ideal for both R&D and mass production applications in electronic component testing.

Key Features:

• Frequency range: 1 MHz to 3 GHz
• Test speed: 0.5 ms
• Measurement variability: 0.07%
• Basic accuracy: ±0.65% reading
• RF I-V measurement technique
• Compact half-rack design with palm-sized test head
• Robust contact check capabilities
• Analyzer mode: frequency and level sweeps, time interval measurements

Teledyne Test Tools LCR Meters offer precision testing in a compact form, perfect for R&D labs and production lines.

Key Features:

• 3.5” high-resolution color LCD display
• Test frequency up to 300 kHz with continuous output
• 0.05% basic measurement accuracy
• Spot or full frequency range with OPEN/SHORT correction
• Automatic Level Control (ALC) for consistent voltage on components like MLCCs
• Measure up to 4 parameters simultaneously
• DCR measurement & built-in ±2.5 V DC bias
• PASS/FAIL indicator and 10-bin sorting function
• List measurement for automated test sweeps (up to 10 points)
• Interfaces: RS-232C, USB, handler, and USB storage
• Compact 2U, 1/2 rack size for automated test setups

The Aim-TTi LCR400 Precision LCR Meter delivers high-accuracy component testing in a compact, user-friendly design. With 0.1% basic accuracy and built-in comparator functions, it’s ideal for precision component measurement and quality control.

Key Features:

• 0.1% basic measurement accuracy for reliable results
• Automatic component recognition for ease of operation
• Dual 5-digit high-brightness displays for clear readings
• Built-in 4-terminal component fixture for stable connections
• Limits comparator with 8 Pass bins and 2 Fail bins
• Three selectable test frequencies with switchable bias
• RS232 standard interface for PC connectivity
• Optional SMD tweezers, Kelvin clips, and PC logging software

The Memory HiCorder MR8848 is a rugged, high-speed data acquisition recorder designed for capturing critical transient events in demanding industrial and infrastructure environments.

Key Features

• Durable, shock-resistant portable design for field use
• Isolated analog channels for safe multi-system measurements
• 32 analog and 64 logic channels for complex signal analysis
• High-speed sampling to capture fast transient waveforms
• Large-capacity memory for long-duration recording
• Built-in waveform and numerical analysis for pass or fail judgments
• Optional on-site printer for secure, tamper-proof documentation

The Memory HiCorder MR8870 is a compact, high-speed data acquisition recorder designed for waveform observation and RMS variation recording in maintenance and fault analysis applications.

Key Features

• Dual recording mode for instantaneous waveforms and RMS variations
• Two isolated analog channels with 2 MW internal memory
• Real-time saving of measured values to CF card
• Synchronize two instruments to record four channels at once
• High-speed performance up to 1 MS per second
• Compact handheld design for easy field transport
• Sharp QVGA TFT wide LCD for clear waveform viewing
• Ideal for elevator, motor, inverter, and machine diagnostics

The Memory HiCorder MR8875 is a high-speed, portable data acquisition recorder designed for vehicle testing, performance evaluation, and advanced multichannel measurements.

Key Features

• 1000 V direct input with instantaneous DC and RMS measurement
• Up to 16 to 60 channels with plug-and-play input modules
• High-speed simultaneous logging down to 2 microseconds
• Real-time recording directly to SD card for long-term logging
• 16-bit high-resolution measurement for accurate results
• Direct CAN bus input for onboard vehicle analysis
• Built-in FFT and waveform calculation for advanced analysis
• Intuitive touch screen interface for fast setup and operation
• Designed to withstand vibration and extreme temperatures

The Memory HiCorder MR8880 is a rugged, field-ready waveform recorder designed to capture high- and low-voltage signals safely in industrial and maintenance applications.

Key Features

• Direct 600 V input for three-phase power measurements
• CAT III 600 V isolation for safe high-voltage testing
• Four completely isolated analog channels
• Simultaneous recording of three-phase systems plus one spare channel
• Wide operating temperature range from minus 10 to 50 degrees Celsius
• Shock- and vibration-resistant housing with side protectors
• Built-in trigger and pre-trigger functions for precise event capture
• Presets function for fast and consistent setup

The Pulse Generator MR8791 is a plug-and-play input module for Hioki Memory HiCorders, designed for precise control simulation testing of electronic control systems.

Key Features

• Outputs pulse and pattern waveforms on up to eight channels
• Supports TTL level and open-collector output signals
• Designed for control simulation testing of ECUs and control boards
• Suitable for engine, airbag, brake, and power steering systems
• Wide frequency range for pulse and logic pattern generation
• Built-in self-test function for reliable operation
• Isolated design between unit and output channels
• Compact form factor for laboratory and test bench integration

The RM3542C Resistance Meter is designed for high-precision, in-line testing of chip resistors and ferrite beads. It delivers fast, reliable, and safe measurement for modern production lines.

Key Features

• ΔR function for cross-stage process comparison (RM3542C-3)
• BIN grading for instant sorting into up to 7 categories (RM3542C-3)
• Jumper resistance support accelerates low-resistance measurements
• Low-stress testing ≤5 V prevents damage to delicate components
• Continuous contact monitoring ensures reliable results
• Galvanically isolated architecture for noise immunity on production lines
• Optimized integration time for high-speed, repeatable measurements

The RM3543 Resistance HiTESTER is a precision DC resistance meter designed to measure ultra-low and low shunt resistances with outstanding accuracy. Ideal for automated systems, this tester ensures repeatable results and reliable data for current sensing resistors, shunts, and other low-resistance components.

Key Features

• Measures super-low resistances: 0.1 mΩ with ±0.16% accuracy
• Ultra-high resolution: 0.01 μΩ for precise inspection
• Offset voltage correction minimizes thermoelectromotive effects
• Scaling function adjusts readings for mounted components
• Contact improvement function ensures stable and reliable measurements
• Advanced contact-check, comparator, and data export capabilities
• Intuitive interface with strong noise immunity
• GP-IB interface available on RM3543-01 for automated systems

The RM3544 Resistance Meter is a high-precision instrument designed for DC resistance measurement in motors, transformers, coils, and power contacts. Ideal for both manual and automated production lines, it ensures fast, reliable, and accurate inspection of electrical components.

Key Features

• High-precision measurement: 0.02% basic accuracy, 1 μΩ resolution
• Wide range: 30 mΩ to 3.5 MΩ, suitable for coils, transformers, and relays
• Maximum testing current: 300 mA
• Temperature correction ensures accurate results even with thermal fluctuations
• EXT I/O, RS-232C, and USB support (RM3544-01) for automated production line integration
• Optional LED comparator and audible PASS/FAIL tones for noisy environments
• Fast measurement speed: 21 ms (50 Hz) / 18 ms (60 Hz)