1 800 665 7301 | info@tmetrix.com

Products


  • AE Techron 8700 Series High-Frequency Power Amplifier

    Key Features:

    • Power output from 4 kW to 24 kW (up to 120 kVA)
    • Voltage range up to ±400 Vp / 350 VDC
    • Current output up to 360 ARMS continuous
    • Wide bandwidth: DC to 250 kHz
    • High slew rate: up to 300 V/µs
    • Switch-mode efficiency with linear performance
    • Scalable for both bench and rack applications
    • Drives reactive and resistive loads with no power loss
    • THD less than 0.8% with ultra-low noise floor
    • Ideal for EMC, MIL-PRF, ISO 61000, and automotive testing

     

  • AE Techron 9100 Series High-Current Power Amplifiers

    Key Features:

    • Power output up to 5 kW continuous (4.2 kW for 9105 model)
    • Wide bandwidth: DC to 250 kHz
    • Voltage output up to 200 Vp
    • Current output from 50A to 150A peak
    • Fast 7 µs rise/fall time for surges and dropouts
    • Slew rate up to 150 V/µs
    • Four-quadrant operation (source and sink)
    • Stable with highly capacitive loads
    • Works from single-phase AC mains (100–250 VAC)
    • Ideal for automotive, aviation, and EMC conducted immunity testing

     

  • AE Techron RLY Amplifiers – Precision Power for Relay Testing

    Key Features:

    • Designed for rigorous power utility industry testing
    • Peak currents up to 200 amperes for challenging applications
    • Wide bandwidth: DC–10 kHz (current) and DC–100 kHz (voltage)
    • Low distortion and minimal phase error for accurate results
    • Suitable for power grid modeling and relay verification
    • Four-quadrant operation for enhanced versatility
    • Multiple models for varied voltage and current requirements

     

  • Aetec 7794 High Current Industrial Amplifier

    Key Features:

    • Up to 200 Ap / 100 Vp; DC to 150 kHz bandwidth
    • Stable with resistive, inductive, or capacitive loads
    • Controlled-voltage or controlled-current operation
    • Switchable rail supply for optimized load impedance
    • 60A continuous output at 13.8V DC
    • ±95V DC and >35 V/µs slew rate
    • Four-quadrant operation: sourcing and sinking
    • Extensive protection against overvoltage, overcurrent, overtemperature
    • Rack-mountable chassis with LCD fault diagnostics

     

  • AETechron 7796 Amplifier – High-Current, Low-Impedance Industrial Power
    Ideal for precision testing, EMC simulations, and MRI systems.

    Key Features:

    • Delivers over 200 Ap peak current, up to ±180V
    • DC to 100 kHz bandwidth for versatile signal reproduction
    • Four-quadrant operation (source/sink modes)
    • Operates in both voltage and current-controlled modes
    • Handles in-rush currents up to 200A
    • Field-configurable rail supply modes for load optimization
    • Advanced protection against voltage, current, and thermal faults
    • Stackable for higher voltage or current (up to 800 Ap)

     

  • AIM-TTi 1908 Series – 5.5 Digit Dual Display Multimeter
    High-performance, bench-top or portable multimeter for professional-grade precision and versatility.

    Key Features:

    • 5.5-digit resolution with dual display
    • True RMS AC + frequency, capacitance & temperature measurements
    • Dual measurement capability for parallel data monitoring
    • USB standard (1908); USB, RS232, LAN/LXI on 1908P
    • Optional GPIB interface (1908P)
    • Powered by AC mains or internal rechargeable batteries
    • High accuracy up to 0.02%, resolution down to 1µV and 0.1µA
    • Ideal for both laboratory and field applications
    • PC-Link software included for remote control and data logging

     

  • A precision AC power supply designed for EMC testing, pre-compliance setups, and product development labs.

    Key Features:

    • 1000W power output at 230V
    • Low harmonic distortion for clean AC testing
    • Delivers up to 4.4A RMS and 10A peak currents
    • EN61000–3–2 compliant for harmonic emissions
    • Available with UK, Schuko, or USA sockets
    • Comprehensive built-in overload protection
    • Simple connection via standard power connectors

     

  • Reliable, flexible, and programmable power delivery for bench, system, and ATE applications.

    Key Features:

    • PowerFlex technology for variable V/A within power limits
    • Up to 60V and 20A, 180W or 420W per output
    • Dual or single isolated outputs
    • CV or CC operation with settings lock (S-Lock)
    • Selectable OVP trips and remote sense terminals
    • RS232, USB, LAN/LXI standard on P models
    • GPIB available as option (P models only)
    • Compact, rugged 3U quarter or half rack design
    • Analog remote control (CPX400SA model)

     

  • Key Features:

    • Wide frequency range: 9 kHz – 8 GHz
    • High gain: 29 dB up to 6 GHz, 27 dB from 6 – 8 GHz
    • Low noise figure: < 2.7 dB @ 1 GHz
    • Compact aluminum housing (85 × 36 × 29 mm, 130 g)
    • ESD-protected input for safe operation
    • Operates on simple +12 V DC power supply
    • Rugged and lightweight design for field and lab use

     

  • A modular, scalable, and intelligent matrix switching system designed for precision in multi-channel test applications.

    Key Features:

    • Modular design with up to 4 plugin switch cards
    • 6×32 channel matrix, up to 2A per channel
    • Remote control via TCP/IP interface
    • Integrated diagnostics & safety monitoring
    • Compatible with LabView, Python, C++, CANoe, and more
    • Auto-cooling with smart fan activation
    • Rack-mountable 4HU chassis with high build quality
    • Expandable switching lines with CU-600 matrix
    • Unlimited waveform size with dual waveform output
    • Protocol generation and oscilloscope waveform simulation

     

  • The complete turnkey solution for testing high-voltage transient emissions and immunity under ISO 7637-4 standards.

    Key Features:

    • Full ISO 7637-4 compliance
    • Pulse A: Switching noise simulation (100 kHz–10 MHz)
    • Pulse B: Low-frequency sinusoidal testing (3 kHz–300 kHz)
    • 75W high-power RF amplifier for clean signal output
    • Configurable burst generation (1–1000 cycles)
    • Galvanically isolated digital I/O and EUT interlock
    • Scalable and modular hardware for custom test setups
    • Integrated overvoltage and transient protection
    • WaveMaster software with graphical waveform creation
    • Compatible with LabView, Python, C++, and more

     

  • The CAR AWG 6000 is a high-performance, 4-quadrant battery simulator designed for EMC testing on vehicle supply lines. This powerful unit delivers precise voltage variations up to ±70V and 200A, compliant with international automotive standards.

    Key Features:

    • 4-quadrant voltage/current amplifier
    • Battery simulation up to ±70V and 200A
    • Compliant with ISO 7637-2, LV 124, LV 148, and more
    • Arbitrary waveform generation at 20MSa/s, 16kSa
    • Bandwidth up to 1 MHz for small signals
    • Simulates pulse 2b, pulse 4, crank profiles, and AC ripple
    • Selectable output impedance: 0–200 mΩ
    • Overvoltage and overcurrent protection
    • Integrated impulse recording function (IRF)
    • Remote control via CAR-Remote software and Ethernet

     

  • A powerful battery simulator designed for high-voltage automotive testing up to 1500V. Compact, efficient, and ISO 7637-4:2020 compliant.

    Key Features:

    • Output voltage up to 1500V DC
    • Supports 30A at 500V, 10A at 1500V
    • Constant power delivery of 15kW
    • Slew rate up to 100V/µs for rapid rise time
    • Remote PC control via CAR-Remote software
    • Parallel stacking up to 10 units (100A total)
    • Compliant with ISO 7637-2, ISO 7637-4, FMC1280
    • Compact desktop design with built-in Ethernet
    • Robust overvoltage and overcurrent protection

     

  • Cascade Autonomous DC delivers fully automated DC wafer probing with unmatched precision and efficiency powered by Contact Intelligence™.

    Key Features:

    • Autonomous DC wafer probing with hands-free 24/7 operation
    • Contact Intelligence™ technology for dynamic probe correction and reliable pad placement
    • High throughput with up to 4x faster flicker noise thermal testing on pads as small as 30 µm
    • Unattended operation for overnight or weekend testing without user intervention
    • Automatic probe alignment compensating for thermal drift to reduce soak time
    • Flexible probe layouts supporting single DUT and multi-DUT configurations
    • Ease of use – start testing with just one button, ideal for operators at all levels

     

  • Cascade Autonomous RF delivers fully automated RF and mm-wave wafer probing with Contact Intelligence™ for unmatched accuracy and efficiency.

    Key Features:

    • Autonomous RF wafer probing with hands-free 24/7 operation
    • Contact Intelligence™ for on-the-fly probe correction and pad placement
    • Automatic calibration up to 500 GHz with WinCal XE software
    • Calibration drift monitoring with auto re-calibration when needed
    • Reduced soak time through dynamic probe re-alignment across temperatures
    • Unattended operation for continuous overnight and weekend testing
    • Supports 200 mm and 300 mm probe stations including CM300xi, SUMMIT200, Summit 12000, and Elite 300
    • Simplified one-button operation, suitable for operators at all levels

     

  • Cascade Autonomous RF delivers fully automated RF and mm-wave wafer probing with Contact Intelligence™ for unmatched accuracy and efficiency.

    Key Features:

    • Autonomous RF wafer probing with hands-free 24/7 operation
    • Contact Intelligence™ for on-the-fly probe correction and pad placement
    • Automatic calibration up to 500 GHz with WinCal XE software
    • Calibration drift monitoring with auto re-calibration when needed
    • Reduced soak time through dynamic probe re-alignment across temperatures
    • Unattended operation for continuous overnight and weekend testing
    • Supports 200 mm and 300 mm probe stations including CM300xi, SUMMIT200, Summit 12000, and Elite 300
    • Simplified one-button operation, suitable for operators at all levels