Products

The BT4560-50 Battery Impedance Meter provides accurate Electrochemical Impedance Spectroscopy (EIS) measurements for high-capacity batteries in EVs and ESSs. Designed for R&D and manufacturing, it simplifies the testing of internal battery resistance, charge transfer, and electrode behavior, while enabling multi-battery evaluation systems.

Key Features

• EIS measurement frequency: 0.01 Hz to 1.05 kHz
• Simultaneous impedance, voltage, and temperature measurement
• Dedicated evaluation software for R&D analysis
• Compatible with third-party equivalent circuit analysis
• LAN interface for production line integration and multi-channel testing
• Measures very low impedances: 1 mΩ or less
• Four-terminal pair probes reduce noise and ensure stable readings

The BT4560-60 Battery Impedance Meter delivers reliable Electrochemical Impedance Spectroscopy (EIS) measurements for EVs, energy storage systems, and high-capacity battery R&D and production. Engineered for precision and efficiency, it enables quick assessment of battery cell health, internal resistance, and electrode performance.

Key Features

• EIS measurement frequency: 0.01 Hz to 10 kHz
• Simultaneous impedance, voltage, and temperature measurement
• Dedicated software for R&D evaluation
• Compatible with third-party equivalent circuit analysis
• Scalable multi-battery testing via SW1001/SW1002 Switch Mainframes
• Measures very low impedances: 1 mΩ or less
• Four-terminal pair measurement for stable, noise-resistant readings

Cannabis Extraction Chillers are engineered for precise cooling of ethanol, alcohol, and hydrocarbon solvents used in CBD and THC extraction. Designed for speed and reliability, these systems enhance extraction efficiency and throughput.

Key Features

• Cooling capability down to -80°C and below
• High cooling capacity up to 20kW at ultra-low temperatures
• Supports ethanol, alcohol, and hydrocarbon extraction
• Cryogenic and compressor-based system options
• Fast pull-down times for improved processing speed
• Compact footprint for easy integration
• Programmable touchscreen control with remote access
• Suitable for both large-scale and small-batch operations
• Built for high reliability with global support

The CAR AWG 6000 is a high-performance, 4-quadrant battery simulator designed for EMC testing on vehicle supply lines. This powerful unit delivers precise voltage variations up to ±70V and 200A, compliant with international automotive standards.

Key Features:

• 4-quadrant voltage/current amplifier
• Battery simulation up to ±70V and 200A
• Compliant with ISO 7637-2, LV 124, LV 148, and more
• Arbitrary waveform generation at 20MSa/s, 16kSa
• Bandwidth up to 1 MHz for small signals
• Simulates pulse 2b, pulse 4, crank profiles, and AC ripple
• Selectable output impedance: 0–200 mΩ
• Overvoltage and overcurrent protection
• Integrated impulse recording function (IRF)
• Remote control via CAR-Remote software and Ethernet

A powerful battery simulator designed for high-voltage automotive testing up to 1500V. Compact, efficient, and ISO 7637-4:2020 compliant.

Key Features:

• Output voltage up to 1500V DC
• Supports 30A at 500V, 10A at 1500V
• Constant power delivery of 15kW
• Slew rate up to 100V/µs for rapid rise time
• Remote PC control via CAR-Remote software
• Parallel stacking up to 10 units (100A total)
• Compliant with ISO 7637-2, ISO 7637-4, FMC1280
• Compact desktop design with built-in Ethernet
• Robust overvoltage and overcurrent protection

Cascade Autonomous DC delivers fully automated DC wafer probing with unmatched precision and efficiency powered by Contact Intelligence™.

Key Features:

• Autonomous DC wafer probing with hands-free 24/7 operation
• Contact Intelligence™ technology for dynamic probe correction and reliable pad placement
• High throughput with up to 4x faster flicker noise thermal testing on pads as small as 30 µm
• Unattended operation for overnight or weekend testing without user intervention
• Automatic probe alignment compensating for thermal drift to reduce soak time
• Flexible probe layouts supporting single DUT and multi-DUT configurations
• Ease of use – start testing with just one button, ideal for operators at all levels

Cascade Autonomous RF delivers fully automated RF and mm-wave wafer probing with Contact Intelligence™ for unmatched accuracy and efficiency.

Key Features:

• Autonomous RF wafer probing with hands-free 24/7 operation
• Contact Intelligence™ for on-the-fly probe correction and pad placement
• Automatic calibration up to 500 GHz with WinCal XE software
• Calibration drift monitoring with auto re-calibration when needed
• Reduced soak time through dynamic probe re-alignment across temperatures
• Unattended operation for continuous overnight and weekend testing
• Supports 200 mm and 300 mm probe stations including CM300xi, SUMMIT200, Summit 12000, and Elite 300
• Simplified one-button operation, suitable for operators at all levels

Cascade Autonomous Silicon Photonics delivers fully automated wafer and die-level photonics probing with Contact Intelligence™ for unmatched accuracy.

Key Features:

• Flexible vertical and edge coupling with single fibers or fiber arrays
• OptoVue™ technology for real-time in-situ calibrations
• Exclusive TopHat environment for dark, frost-free thermal testing (-40°C to +125°C)
• Sub-micron placement accuracy with Z displacement sensing
• Collision avoidance technology for safe fiber alignment
• SiPh-Tools software for automated alignment, calibration, and data management
• Partnership with Keysight and PI for seamless instrumentation and precision positioning
• Available on CM300xi-SiPh and SUMMIT200 probe stations

Cascade CM300xi – 300 mm Semi-/Fully-Automated Probe System

Key Features:

• Supports DC, AC, RF/microwave, WLR, FA, and design debug applications
• Wide thermal range from -60°C to +300°C with IceShield or TopHat compatibility
• Reliable, repeatable probe contact in a moisture-free, EMI-shielded environment
• Contact Intelligence™ technology for autonomous alignment and accurate measurements
• Modular design with upgrade paths for semi- or fully-automated configurations
• Handles up to 50 wafers with SEMI-standard cassette automation
• Fast transition times with MicroVac™ and FemtoGuard™ low-noise technologies
• Intuitive Velox software and Velox Dash™ touchscreen interface for simplified operation

Engineered for precision and safety, the EPS150TESLA delivers accurate on-wafer power device characterization up to 3,000 V and 100 A, making it a trusted choice for high-voltage and high-current testing.

Key Features:

• On-wafer power device characterization up to 3,000 V (triaxial) / 10,000 V (optional coaxial).
• High-current probing up to 100 A with ultra-low contact resistance.
• Triax chuck design for accurate low-leakage measurements.
• Shielded test environment with advanced grounding and arcing protection.
• Seamless integration with analyzers via SIGMA kit and optimized signal path.
• Safe probe tip exchange and thin-wafer handling capability.

Cascade EPS200MMW mmW and THz Probe System

Key Features:

• Complete mmW, THz, and load-pull measurement solution.
• Accurate probing up to 500 GHz with T-Wave Probes and VDI Extenders.
• SlimVue Microscope with 1 μm resolution and quick lens exchange.
• Resolves pads smaller than 50 μm with precision optics.
• Sigma Application Kits for broadband, load-pull, coax RF, and waveguide setups.
• Rock-solid mechanical design with submicron stage accuracy.
• Motorized positioner with ±1 μm separation repeatability.
• Stable and repeatable probe placement for THz frequencies.

Cascade EPS200RF 200 mm Manual Probe System

Key Features:

• Complete RF measurement package up to 67 GHz.
• Based on the PM8 platform for stability and flexibility.
• Supports Infinity, ACP, and |Z| probe technologies for different material types.
• High precision probing with RF chuck ±3 μm planarity.
• 500 μm platen stroke with ≤±1 μm accuracy for repeatable contact.
• Reliable probing for pads as small as 25 µm x 35 µm.
• Includes matching cables, substrates, and WinCal XE calibration software.
• Delivers accurate S-parameter measurements with automated calibration.

Key Features:

• 150 mm modular probe station with customizable base and starter kits.
• Flexible options for IV/CV, RF, mmWave, THz, high power, and failure analysis.
• Solid frame with built-in vibration isolation for measurement stability.
• Supports advanced microscopes, triax, coax, and RF chucks.
• Seamless integration with leading measurement instruments.
• Ergonomic design with quick pull-out stage for fast device handling.
• Re-configurable and upgradable to grow with future testing needs.

Cascade MPS150-SiPh Manual Silicon Photonics Probe Station

Key Features:

• Cost-effective entry-level photonics probe station.
• Supports surface coupling and horizontal edge coupling.
• Retro-mirror technology for precise fiber alignment.
• Tip-tilt base positioner with 6 degrees of freedom.
• Compatible with single fibers and fiber arrays.
• Optional eVue digital imaging or SlimVue high-performance microscope.
• Modular, upgradable design with platen extensions.
• Ergonomic and intuitive for users of all experience levels.

Key Features:

• Supports wafers and substrates up to 200 mm
• Operates in high vacuum down to <1×10⁻⁵ mbar or overpressure up to 4.0 bar
• Flexible setup with probe cards or up to eight positioners
• Optional thermal chuck from -60°C to +300°C with pressure regulation
• Accessories include IR black bodies and optical motion analysis tools
• Upgrade path to 300 mm wafers
• Solid station frame with built-in vibration isolation for stable measurements
• Ergonomic front-side loading with joystick control
• Velox software for efficient wafer alignment and step-and-repeat automation
• Ideal for MEMS, DC, RF, C-V, and optoelectronic testing

Cascade PAV200 – 200 mm Semi-Automated Vacuum Probe System

Key Features:

• Supports wafers and substrates up to 200 mm (optional upgrade to 300 mm)
• Operates in high vacuum down to < 1×10⁻⁴ mbar
• Semi-automated control with joystick and software-driven chuck movement
• Up to eight probe positioners and/or probe card integration
• Optional thermal chuck with -60°C to 300°C range
• Solid frame with vibration isolation for stable, accurate measurements
• Wide application support: DC, RF, MEMS, and optoelectronics
• Velox software for wafer alignment, mapping, and simplified automation