Products

The AH401D Picoammeter is a compact and high precision 4 channel charge integration electrometer designed for accurate low current measurements. Built with an advanced charge integration input stage and a 20 bit delta sigma ADC, the instrument ensures reliable sensing of extremely small currents with minimal noise. Its simultaneous multi channel sampling, Ethernet connectivity, and trigger input make it a powerful solution for beam monitoring, detector measurements, and scientific instrumentation. The AH401D is engineered for stable performance, high linearity, and precise signal acquisition in demanding laboratory environments.

Key Features

• 4 channel simultaneous sampling picoammeter
• Advanced charge integration input stage for precise current sensing
• 20 bit delta sigma ADC with digital noise reduction filter
• Eight selectable input current ranges
• Measurement ranges from 50 pA up to 2 µA
• Ultra high resolution down to 50 aA
• User selectable integration time from 1 ms to 1 s
• Continuous current to voltage conversion without dead time
• Ethernet interface with TCP/IP and UDP communication
• External trigger input for synchronized measurements
• Compact low noise design for close placement to signal sources
• Plug and play oscilloscope software for configuration and analysis

The AH501D Picoammeter is a high performance 4 channel bipolar electrometer designed for precise low current measurements in advanced research and detector monitoring systems. Built with a transimpedance input stage and high resolution 24 bit conversion, the instrument delivers accurate simultaneous current measurements across multiple channels. With an integrated bias voltage source, analog monitoring outputs, and Ethernet connectivity, the AH501D provides a complete solution for beam position monitoring, detector analysis, and scientific instrumentation.

Key Features

• 4 channel simultaneous sampling bipolar picoammeter
• 24 bit high resolution current measurement
• Three selectable input current ranges
• Bipolar current measurement capability
• Measurement range from ±2.5 nA up to ±2.5 mA
• Ultra high resolution down to 300 aA
• Fast sampling with minimum period of 38.4 microseconds
• Integrated low noise bias voltage source up to 30 V
• Analog monitor outputs for real time signal observation
• Ethernet interface with TCP/IP and UDP communication
• External trigger and gate input for synchronized acquisition
• Compact design to reduce cable noise interference
• Plug and play oscilloscope software for configuration and analysis

AIM-TTi 1908 Series – 5.5 Digit Dual Display Multimeter
High-performance, bench-top or portable multimeter for professional-grade precision and versatility.

Key Features:

• 5.5-digit resolution with dual display
• True RMS AC + frequency, capacitance & temperature measurements
• Dual measurement capability for parallel data monitoring
• USB standard (1908); USB, RS232, LAN/LXI on 1908P
• Optional GPIB interface (1908P)
• Powered by AC mains or internal rechargeable batteries
• High accuracy up to 0.02%, resolution down to 1µV and 0.1µA
• Ideal for both laboratory and field applications
• PC-Link software included for remote control and data logging

A precision AC power supply designed for EMC testing, pre-compliance setups, and product development labs.

Key Features:

• 1000W power output at 230V
• Low harmonic distortion for clean AC testing
• Delivers up to 4.4A RMS and 10A peak currents
• EN61000–3–2 compliant for harmonic emissions
• Available with UK, Schuko, or USA sockets
• Comprehensive built-in overload protection
• Simple connection via standard power connectors

Reliable, flexible, and programmable power delivery for bench, system, and ATE applications.

Key Features:

• PowerFlex technology for variable V/A within power limits
• Up to 60V and 20A, 180W or 420W per output
• Dual or single isolated outputs
• CV or CC operation with settings lock (S-Lock)
• Selectable OVP trips and remote sense terminals
• RS232, USB, LAN/LXI standard on P models
• GPIB available as option (P models only)
• Compact, rugged 3U quarter or half rack design
• Analog remote control (CPX400SA model)

The AMC-PICO-8 Picoammeter is a high performance 8 channel bipolar electrometer designed for precision current measurements in advanced instrumentation environments. Built in the MTCA.4 format, the device combines a specialized transimpedance input stage with 20 bit simultaneous sampling ADCs to deliver fast and accurate current sensing. With sampling speeds up to 1 MSPS and floating input capability up to ±300 V, the system supports demanding detector readout and scientific measurement applications. Its FPGA based signal processing and PCI Express communication ensure reliable data acquisition and efficient system integration.

Key Features

• 8 channel simultaneous bipolar current measurement
• High resolution 20 bit analog to digital conversion
• Sampling rate up to 1 MSPS for fast data acquisition
• MTCA.4 Advanced Mezzanine Card architecture
• Floating input capability up to ±300 V relative to chassis ground
• Transimpedance input stage with advanced signal conditioning
• Multiple selectable measurement ranges depending on configuration
• Integrated FPGA for high speed signal processing
• Digital channel calibration with onboard EEPROM storage
• Trigger based acquisition with pre trigger memory capture
• PCI Express communication interface for system control
• Scatter gather DMA support for high speed data transfer

The BatReg² Battery Cycler is a high-precision bidirectional and regenerative battery testing system designed for advanced battery research, cycling, and charging applications. Built with state-of-the-art digital control and regenerative technology, it enables accurate testing while efficiently returning excess energy to the grid. With output ratings up to 100 V and ±150 A, this system delivers reliable performance for laboratories, research centers, and battery development facilities.

Key Features

• High-precision bidirectional and regenerative battery cycler
• Output capability up to 100 V and ±150 A
• Multiple regulation modes including Constant Voltage, Constant Current, and Constant Power
• 24-bit resolution at 100 kHz for precise output setting and readback
• Built-in polarity detection for safe battery connection
• Embedded web server interface for monitoring and configuration
• Integrated 24-bit Arbitrary Waveform Generator running at 100 kHz
• 4-channel precision oscilloscope for advanced signal monitoring
• High efficiency regenerative design that returns energy to the grid
• Low output noise and ripple due to high switching frequency architecture
• Ethernet connectivity supporting TCP/IP and UDP communication
• Optional trigger, analog control, auxiliary ADC, and K-type thermocouple inputs

The BEST Beam Stabilization System is a complete turnkey solution designed to control and stabilize photon beam position and intensity in synchrotron radiation X ray beamlines. Developed to support high precision beamline experiments, the system integrates advanced hardware with powerful software tools to deliver reliable beam monitoring and correction. With a distributed architecture and FPGA driven control algorithms, the BEST system allows researchers to optimize beam stability, improve experimental accuracy, and maintain consistent beam performance in demanding scientific environments.

Key Features

• Complete turnkey system for photon beam position and intensity stabilization
• Designed for synchrotron radiation X ray beamline applications
• Simultaneous control of beam position X and Y and beam intensity I0
• Distributed architecture for flexible installation near beamline components
• High speed FPGA based hardware for low latency correction performance
• Advanced control algorithms operating across several kHz frequency range
• Integrated readout unit based on high precision picoammeter technology
• Dedicated control and interface unit for system configuration and monitoring
• Gigabit Ethernet connectivity for network integration
• High throughput communication interface for real time system control
• Compatible with EPICS based beamline control systems
• Software tools for detector configuration and beamline optimization

Bio-Freezers are high-performance laboratory freezers designed for safe storage of pharmaceuticals, vaccines, and biological samples. Built with advanced temperature control and forced-air circulation, they ensure stability and reliability in demanding lab environments.

Key Features

• Temperature range: -10°C to -30°C with 0.1°C increments
• Forced-air circulation for uniform cooling
• Large LED display and multiple sensors for accurate monitoring
• Auto defrost function for consistent performance in high humidity
• 60mm thick insulation for superior temperature stability
• Safety door lock and password protection to prevent unauthorized access
• CFC-free/HCFC refrigerant for eco-friendly operation
• Inner lighting for easy viewing of contents
• Available in multiple sizes: 23, 39, and 47 CuFt

Cannabis Extraction Chillers are engineered for precise cooling of ethanol, alcohol, and hydrocarbon solvents used in CBD and THC extraction. Designed for speed and reliability, these systems enhance extraction efficiency and throughput.

Key Features

• Cooling capability down to -80°C and below
• High cooling capacity up to 20kW at ultra-low temperatures
• Supports ethanol, alcohol, and hydrocarbon extraction
• Cryogenic and compressor-based system options
• Fast pull-down times for improved processing speed
• Compact footprint for easy integration
• Programmable touchscreen control with remote access
• Suitable for both large-scale and small-batch operations
• Built for high reliability with global support

Cascade Autonomous DC delivers fully automated DC wafer probing with unmatched precision and efficiency powered by Contact Intelligence™.

Key Features:

• Autonomous DC wafer probing with hands-free 24/7 operation
• Contact Intelligence™ technology for dynamic probe correction and reliable pad placement
• High throughput with up to 4x faster flicker noise thermal testing on pads as small as 30 µm
• Unattended operation for overnight or weekend testing without user intervention
• Automatic probe alignment compensating for thermal drift to reduce soak time
• Flexible probe layouts supporting single DUT and multi-DUT configurations
• Ease of use – start testing with just one button, ideal for operators at all levels

Cascade Autonomous RF delivers fully automated RF and mm-wave wafer probing with Contact Intelligence™ for unmatched accuracy and efficiency.

Key Features:

• Autonomous RF wafer probing with hands-free 24/7 operation
• Contact Intelligence™ for on-the-fly probe correction and pad placement
• Automatic calibration up to 500 GHz with WinCal XE software
• Calibration drift monitoring with auto re-calibration when needed
• Reduced soak time through dynamic probe re-alignment across temperatures
• Unattended operation for continuous overnight and weekend testing
• Supports 200 mm and 300 mm probe stations including CM300xi, SUMMIT200, Summit 12000, and Elite 300
• Simplified one-button operation, suitable for operators at all levels

Cascade Autonomous Silicon Photonics delivers fully automated wafer and die-level photonics probing with Contact Intelligence™ for unmatched accuracy.

Key Features:

• Flexible vertical and edge coupling with single fibers or fiber arrays
• OptoVue™ technology for real-time in-situ calibrations
• Exclusive TopHat environment for dark, frost-free thermal testing (-40°C to +125°C)
• Sub-micron placement accuracy with Z displacement sensing
• Collision avoidance technology for safe fiber alignment
• SiPh-Tools software for automated alignment, calibration, and data management
• Partnership with Keysight and PI for seamless instrumentation and precision positioning
• Available on CM300xi-SiPh and SUMMIT200 probe stations

Cascade CM300xi – 300 mm Semi-/Fully-Automated Probe System

Key Features:

• Supports DC, AC, RF/microwave, WLR, FA, and design debug applications
• Wide thermal range from -60°C to +300°C with IceShield or TopHat compatibility
• Reliable, repeatable probe contact in a moisture-free, EMI-shielded environment
• Contact Intelligence™ technology for autonomous alignment and accurate measurements
• Modular design with upgrade paths for semi- or fully-automated configurations
• Handles up to 50 wafers with SEMI-standard cassette automation
• Fast transition times with MicroVac™ and FemtoGuard™ low-noise technologies
• Intuitive Velox software and Velox Dash™ touchscreen interface for simplified operation

Engineered for precision and safety, the EPS150TESLA delivers accurate on-wafer power device characterization up to 3,000 V and 100 A, making it a trusted choice for high-voltage and high-current testing.

Key Features:

• On-wafer power device characterization up to 3,000 V (triaxial) / 10,000 V (optional coaxial).
• High-current probing up to 100 A with ultra-low contact resistance.
• Triax chuck design for accurate low-leakage measurements.
• Shielded test environment with advanced grounding and arcing protection.
• Seamless integration with analyzers via SIGMA kit and optimized signal path.
• Safe probe tip exchange and thin-wafer handling capability.

Cascade EPS200MMW mmW and THz Probe System

Key Features:

• Complete mmW, THz, and load-pull measurement solution.
• Accurate probing up to 500 GHz with T-Wave Probes and VDI Extenders.
• SlimVue Microscope with 1 μm resolution and quick lens exchange.
• Resolves pads smaller than 50 μm with precision optics.
• Sigma Application Kits for broadband, load-pull, coax RF, and waveguide setups.
• Rock-solid mechanical design with submicron stage accuracy.
• Motorized positioner with ±1 μm separation repeatability.
• Stable and repeatable probe placement for THz frequencies.