Products

Low Noise Amplifiers from Exodus Advanced Communications are engineered to deliver exceptional signal clarity and sensitivity across a wide frequency range. Designed for high-performance RF applications, these amplifiers provide ultra low noise figures, high gain, and reliable operation in demanding environments. With coverage from 10 kHz to 50 GHz, Low Noise Amplifiers are ideal for aerospace, defense, telecommunications, and scientific research systems.

Key Features

• Ultra wide frequency coverage from 10 kHz to 50 GHz
• Extremely low noise figure for high sensitivity applications
• High gain performance up to 60 dB
• Output power up to 2 W depending on model
• Advanced RF design for superior signal fidelity
• Available in hermetically sealed and rugged configurations
• Suitable for benchtop, laboratory, and field deployment
• Stable performance across varying environmental conditions
• Designed for satellite communication, radar, and RF testing
• Compact and reliable design for easy integration

Exodus Millimeter AMPs – 18 GHz to 50 GHz

• High-performance millimeter-wave solid-state power amplifiers (SSPAs)
• Frequency range: 18 GHz to 50 GHz for high-frequency RF applications
• Output power scalable from 5 W to 1 kW for modules and systems
• CW and linearized designs for precision signal amplification
• Built with GaN, GaAsFET, chip-and-wire hybrid, and waveguide technologies
• Suitable for radar, EW, RF communications, and EMC testing
• Modular, benchtop, and rackmount formats for flexible deployment

• Three or four high performance outputs each with full functionality
• Range switching gives variable voltage/current combinations
• Shared power mode provides double power from a single output
• Low output noise and ripple via linear final regulation
• High setting resolution of up to 1mV and 0.1mA
• Variable OVP and OCP trips on all outputs which can be linked (MX-Q Series 2 units only)
• Individual or combined output on/off control with programmable delay sequencing.
• Selectable voltage tracking (isolated tracking)
• Selectable current meter averaging
• Switchable remote sense capability
• Graphic LCD (colour on Series 2) provides simultaneous output metering
• Numeric or spin-wheel control of all parameters
• 50 setting memories per output plus 50 linked memories
• 3U rack case for bench or rack mounting (4U rack kit accessory available)
• RS-232, USB and LAN (LXI) interfaces (P models)
• GPIB option (P models only)
• Duplicate power & sense terminals at rear (P models)
• Software control from Test Bridge software (free download – P models only)

Series 2 (“S2”) models add:

• Colour display
• Enhanced channel power sharing
• ‘TripLink’ feature: Link channels to trip together on OVP or OCP
• New MX103Q SELV Model

Key Features

• Supports wafers up to 200 mm (optional 300 mm upgrade)
• Operates at cryogenic temperatures down to 10 K
• Semi-automated with optional full automation via autoloader
• Compatible with liquid nitrogen, liquid helium, or cryo-cooler
• Ice- and condensation-free probing for stable performance
• Up to eight probe positioners or probe card integration
• Solid vibration-isolated frame for precision measurements
• Velox software with intuitive alignment and automation

The Aim-TTi PL Series DC Power Supply combines precision, flexibility, and reliability in a compact linear regulated design. Available in single, dual, and triple output configurations, it delivers exceptional control and accuracy for laboratory, R&D, and testing environments.

Key Features:

• Single, dual, or triple output models
• Voltage range from 6V/8A to 60V/1.5A
• High-performance linear regulation for low noise
• Compact and space-saving design
• True analog controls for smooth operation
• S-Lock function to instantly lock settings
• V-Span feature to customize voltage range
• Low current measurement and meter averaging
• Selectable remote sense terminals
• Independent, Isolated Tracking, and True Parallel modes
• High current, low voltage output on triple models
• Optional interfaces: RS-232, USB, LAN (LXI), and GPIB
• Analog remote control of voltage and current (single output only)

Key Features

• Entry-level manual wafer probing in vacuum < 1×10⁻⁴ mbar
• Supports wafers up to 150 mm or single dies
• Up to six probe positioners for flexible testing
• Optional thermal chuck from -60°C to +300°C
• Probing possible with open chamber lid at atmosphere
• Stable, vibration-isolated frame for precise results
• Ergonomic design with hinged topside lid for easy access
• Independent control of chuck stage and positioners
• Fast, manual step-and-repeat wafer testing

Cascade PM300 – 300 mm Analytical Probe Station

Key Features:

• Industry benchmark for manual wafer probing and failure analysis.
• Superior mechanical stability with granite base for precision and repeatability.
• High-precision probe positioning with independent X-Y coarse and fine adjustments.
• Configurable for DC, RF, mmW, WLR, FA, and 3D IC testing.
• Wide thermal range: -60°C to +200°C (PM300PS) / +15°C to +300°C (PM300).
• Optional electromagnetic shielding (PM300PS) for ultra-low-noise environments.
• Spacious, ergonomic design supporting up to 12 positioners.
• Upgradeable platform to support future testing needs.

Experience precision RF signal analysis on the go with this lightweight, handheld analyzer designed for both lab and field use.

Key Features:

• Frequency range: 1MHz to 1.3GHz (PSA1303) or 2.7GHz (PSA2703)
• RBW: 300Hz to 10MHz
• -115dBm typical noise floor
• Dual markers with absolute/difference values
• AM/FM demodulation in zero span
• Auto-find & smart marker peak tracking
• USB for waveform saving and PC connection
• Live, View, and Reference trace modes
• 6-hour lithium-ion battery operation
• Weighs just 0.58 kg
• Optional U01 Upgrade: Limit lines, data logging, triggering, compensation tables

High-performance, battery-powered spectrum analyzers ideal for RF engineers and field use.

Key Features:

• Frequency range: 10MHz to 3.6GHz or 6.0GHz
• -120dBm typical noise floor
• Resolution bandwidths from 300Hz to 10MHz
• AM/FM audio demodulation with zero span
• Live, View & Reference traces with markers
• Smart marker tracking with peak detection
• USB data logging & real-time PC view
• Compact, lightweight (0.56 kg) with >3hr battery
• Optional U02 features: limit lines, OBW, ACPR, AM/FM waveform demodulation

Pulse RF Amplifiers from Exodus Advanced Communications are engineered to deliver high peak power and precision performance across a wide frequency range. Designed for pulse-based RF applications, these solid state power amplifiers provide reliable signal amplification with excellent gain stability and fast response. Built using advanced semiconductor technologies, Pulse RF Amplifiers support demanding applications such as radar systems, RF immunity testing, and high power pulse transmission.

Key Features

• Wide frequency range from 1 MHz to 18 GHz
• High peak output power up to 20 kW for system configurations
• Solid state pulse amplifier design for reliable RF performance
• Advanced technologies including LDMOS, GaN, and GaAsFET
• High gain performance up to 69 dB
• Fast response for pulse signal applications
• CW and pulse optimized designs for accurate signal control
• Rugged construction for demanding RF environments
• Available in benchtop, rackmount, and modular formats
• Ideal for radar, HIRF testing, and RF communication systems

• Wide range of voltage/current combinations
• Up to 80V and up to 50A within the same power envelope
• Low output ripple and noise of <3mV rms at full power
• High setting resolution of 1mV
• Analogue control interfaces for voltage and current
• Bench or rack mounting, front and rear terminals
• USB and LAN (LXI) interfaces with GPIB optional (QPX600DP, QPX1200SP and QPX750SP)

Cascade TESLA300 – Advanced On-Wafer Power Device Characterization

Key Features:

• High-voltage and high-current testing up to 10 kV / 600 A.
• Integrated AttoGuard™ and FemtoGuard™ technology for ultra-low leakage and capacitance.
• MicroVac™ chuck surface for thin wafer handling and low contact resistance.
• TÜV-certified safety system with interlocks and full enclosure.
• Top-lift wafer loading eliminates lift pins for accurate vertical device measurements.
• Full thermal range from -60°C to +300°C with efficient transition times.
• Seamless integration with Keysight and Keithley analyzers.
• Remote operation capability for safe offsite control.
• Velox and Velox Dash™ software for intuitive automation.

A high-purity 20MHz DDS function generator designed for engineers requiring precision signal output, advanced modulation, and digital control.

Key Features:

• Frequency range: 0.001Hz to 20MHz
• High resolution: 6 digits or 1mHz
• Excellent stability (1ppm) and 10ppm one-year accuracy
• Digital control for phase-continuous sweep (linear or logarithmic)
• Output range: 5mV to 20V peak-to-peak from 50 or 600 Ohms
• Low distortion sine wave with high spectral purity
• Built-in modulation: AM, FSK, gated mode, tone switching
• Store and recall multiple instrument setups
• USB and RS232 interfaces for remote control

High-performance dual-channel function and arbitrary waveform generator with up to 240 MHz output for advanced test and signal needs.

Key Features:

• Frequency range from 40 MHz to 240 MHz
• Dual independent or coupled full-performance channels
• Precise phase control: 0.001° resolution
• Arbitrary waveform support up to 800 MS/s
• Replay rates up to 80 MHz
• Wide range of built-in and user-defined waveforms
• Pulse generation up to 100 MHz, low jitter
• Internal/external modulation, sweep, gated, and burst modes
• USB, LAN (LXI compliant), and optional GPIB
• PC software for waveform generation and editing

The Aim-TTi TGP3100 Series Pulse and Universal Generator combines digital precision with high-speed performance for advanced signal generation. Ideal for R&D, test automation, and education, it delivers superior waveform quality, flexibility, and ease of use.

Key Features:

• Frequency range up to 25MHz or 50MHz
• Pulse, double pulse, PRBS, and arbitrary waveform generation
• 5ns to 800s adjustable rise and fall times
• Pulse period, width, and delay resolution down to 100ps
• High drive output up to 20V pk-pk into 50Ω
• Noise generator function with user-defined distribution
• AM, FM, PM, FSK, BPSK, PWM, and PDM modulation options
• Sine wave generation up to 50MHz
• 16-bit vertical resolution, 800MS/s sampling rate
• Front USB port for waveform storage
• USB, LAN (LXI), and optional GPIB interfaces

The Aim-TTi TGR205x RF Signal Generator combines precision, performance, and flexibility for modern RF applications. Available in 1.5GHz (TGR2051) and 3GHz (TGR2053) models, it delivers exceptional accuracy, stability, and modulation capability—all within an intuitive, compact design.

Key Features:

• Frequency range: 150 kHz to 1.5/3 GHz
• High signal purity: phase noise < -117 dBc/Hz at 1 GHz
• Output amplitude: -127 dBm to +13 dBm, 0.1 dBm resolution
• 1 ppm frequency accuracy with low drift
• Internal/external AM, FM, PM modulations
• Digital modulations: ASK, FSK, PSK, OOK, MSK, GMSK, 3FSK, 4FSK, HMSK
• Fast amplitude and frequency sweeps with 5 ms settling time
• Internal waveform generator: sine, square, ramp, triangle, PRBS, and custom patterns
• Simple color touch screen operation
• Remote programming via USB, LAN (LXI), and optional GPIB