Products

The FMC-MOTDRV22 Motor Driver is a cost efficient dual channel stepper motor control board designed for systems that require reliable motion control within an FPGA based environment. Built according to the ANSI VITA 57.1 FMC standard, this mezzanine card enables precise control of bipolar stepper motors while providing integrated diagnostics and protection features. With programmable chopper modes, motor load detection, and flexible voltage options, the FMC-MOTDRV22 Motor Driver offers a dependable solution for automation, instrumentation, and scientific motion control systems.

Key Features

• Dual channel stepper motor driver design
• Compatible with ANSI VITA 57.1 FMC standard carrier boards
• Supports bipolar stepper motors for precision motion control
• Maximum output up to 12 V or 24 V at 1.8 A per coil depending on model
• Programmable chopper slope with three operating modes
• Integrated motor load detection without external sensors
• Load dependent current control for efficient motor operation
• Diagnostic monitoring and system protection features
• Protection against overcurrent, short to ground, undervoltage and overheating
• Encoder interface support for motor position monitoring
• Flexible configuration with internal or external power supply options
• Dedicated cabling solutions available for easy installation

The FMC-PICO-1M4 Ammeter is a high precision four channel current measurement board designed for accurate monitoring of very low bipolar currents in advanced electronic systems. Built as a Low Pin Count FPGA Mezzanine Card compliant with the VITA 57.1 FMC standard, this module combines high resolution data acquisition with low latency performance. With 20 bit resolution and sampling speeds up to 1 MSPS, the FMC-PICO-1M4 Ammeter provides reliable current monitoring for scientific instrumentation, accelerator systems, and precision measurement environments.

Key Features

• Four channel high precision floating ammeter design
• 20 bit resolution analog to digital conversion
• Sampling rate up to 1 MSPS for fast data acquisition
• Independent and simultaneous sampling for each channel
• Multiple measurement ranges depending on board version
• Bipolar current measurement capability
• Floating input channels up to ±300 V relative to FMC ground
• Low noise analog front end for precise measurements
• Minimal temperature dependence for stable performance
• Optional factory calibration with EEPROM stored calibration data
• External trigger support for synchronized acquisition
• Separate SPI communication links for each channel
• Compatible with VITA 57.1 FMC Low Pin Count carrier boards

Gas Chillers are designed for precise and efficient cooling of nitrogen, argon, and clean dry air in demanding process applications. Built for reliability and flexibility, these systems deliver ultra-low temperatures with fast response times.

Key Features

• Cooling capability down to -95°C
• Supports nitrogen, argon, air, and clean dry air
• Open loop and closed loop configurations available
• Fast temperature transitions for process efficiency
• No LN2 or LCO2 required for operation
• Auto cascade and cryogenic cooling options
• Advanced control for consistent performance
• Designed for industrial and high precision applications
• Compliant with global industry standards

The HV-PANDA HV Board is a high voltage Advanced Mezzanine Card designed for MTCA.4 systems that require reliable and precise high voltage delivery. This double width AMC board integrates four independent high voltage channels capable of delivering up to 6 kV output. Built using proven high voltage technology, the HV-PANDA HV Board ensures stable operation and secure power control for detector and instrumentation applications. With integrated safety interlocks, flexible channel configurations, and dedicated monitoring software, the board offers a dependable solution for advanced scientific and industrial systems.

Key Features

• Double width AMC board designed for MTCA.4 systems
• Four independent high voltage channels
• Maximum output up to 6 kV per channel depending on configuration
• Multiple channel rating options including 6 kV, 4 kV, and 500 V
• Maximum power up to 6 W per channel
• Positive or negative polarity configuration available
• Front panel interlocks for individual channel safety control
• Additional 12 V power input for high voltage operation
• RTM interface for MTCA backplane connectivity
• Reliable high voltage technology for detector applications
• Graphical user interface for simple system control
• Dedicated drivers for configuration and monitoring

LN2 Cryogenic Chillers are compact and portable cooling systems designed for ultra-low temperature applications. Using liquid nitrogen, these chillers deliver rapid cooling, high capacity, and precise temperature control for demanding industrial processes.

Key Features

• Ultra-low temperature capability down to -100°C
• Cooling capacity up to 20kW at -90°C
• Rapid temperature transition rates for fast processing
• Compact and portable design with small footprint
• On-demand cooling with automatic LN2 control
• High temperature stability up to ±0.5°C
• Supports in-line and tank-based cooling systems
• Advanced control options for flow and pressure
• Suitable for a wide range of industrial applications

Low Temperature Chillers are designed for precise and reliable cooling of fluids and gases in demanding industrial environments. Engineered for performance and flexibility, these chillers deliver consistent temperature control across a wide range of applications.

Key Features

• Wide temperature range from -100°C to +300°C
• Cooling capacity up to 30kW
• Available as fluid, gas, or cryogenic chillers
• Air or water cooled condenser options
• Compatible with various process fluids
• High reliability for continuous operation
• Custom and standard configurations available
• Suitable for multiple industrial applications
• Built to ISO 9001:2015 and ITAR standards

Medical Refrigerators are designed for precise and reliable storage of vaccines, pharmaceuticals, and biological samples. Built for hospitals, labs, and blood banks, they offer uniform cooling and high sanitation standards.

Key Features

• Temperature range: 2°C to 10°C for precise storage
• Heavy-duty air-cooled refrigeration for uniform cooling
• Chemical and germ-resistant interior and exterior coating
• Heat-treated pair glass doors prevent condensation and ice formation
• Available in 1-door and 2-door configurations
• Removable pull-out drawers for easy access
• Auto-stop functionality for safety
• Compliant with CDC guidelines for vaccine and blood storage
• Suitable for lab, pharmaceutical, and medical applications

The NGPS Power Supply is a high stability digital power supply series designed for demanding industrial and scientific applications. Delivering up to 10 kW of output power and scalable up to 40 kW through parallel operation, this advanced system provides precise current and voltage control with exceptional temperature stability. Equipped with Gigabit Ethernet connectivity, an embedded web server, waveform generation capability and a built in oscilloscope, the NGPS Power Supply offers a powerful and flexible solution for laboratories, research facilities and high performance power systems.

Key Features

• High stability digital power supply with output power up to 10 kW
• Parallel operation capability allowing up to 40 kW system power
• Precise current and voltage control using advanced digital architecture
• Temperature stabilized internal section for extremely low drift
• High speed 10/100/1000 Mbit Ethernet communication
• Ultra fast SFP interface supporting update rates up to 100 kHz
• Embedded Linux operating system with web based configuration interface
• Built in Arbitrary Waveform Generation for custom signal control
• Integrated four channel oscilloscope for real time monitoring
• Remote sensing terminals for accurate voltage control at the load
• Optional analog control input for compatibility with legacy systems
• Low noise and high efficiency performance for demanding applications

Key Features

• Supports wafers up to 200 mm (optional 300 mm upgrade)
• Operates at cryogenic temperatures down to 10 K
• Semi-automated with optional full automation via autoloader
• Compatible with liquid nitrogen, liquid helium, or cryo-cooler
• Ice- and condensation-free probing for stable performance
• Up to eight probe positioners or probe card integration
• Solid vibration-isolated frame for precision measurements
• Velox software with intuitive alignment and automation

PAO Chillers are engineered for precise and reliable cooling in military, aerospace, and industrial applications. Designed for use with polyalphaolefin fluids, these systems ensure consistent performance in demanding environments.

Key Features

• Designed for PAO heat transfer fluid applications
• Ideal for military, aerospace, and industrial cooling
• Portable and stand alone system design
• Advanced touchscreen controller with diagnostics
• Real time monitoring and performance graphing
• Remote communication capabilities
• Optional pressure and flow control features
• High reliability for critical applications
• Built to ISO and ITAR compliance standards

Key Features

• Entry-level manual wafer probing in vacuum < 1×10⁻⁴ mbar
• Supports wafers up to 150 mm or single dies
• Up to six probe positioners for flexible testing
• Optional thermal chuck from -60°C to +300°C
• Probing possible with open chamber lid at atmosphere
• Stable, vibration-isolated frame for precise results
• Ergonomic design with hinged topside lid for easy access
• Independent control of chuck stage and positioners
• Fast, manual step-and-repeat wafer testing

Cascade PM300 – 300 mm Analytical Probe Station

Key Features:

• Industry benchmark for manual wafer probing and failure analysis.
• Superior mechanical stability with granite base for precision and repeatability.
• High-precision probe positioning with independent X-Y coarse and fine adjustments.
• Configurable for DC, RF, mmW, WLR, FA, and 3D IC testing.
• Wide thermal range: -60°C to +200°C (PM300PS) / +15°C to +300°C (PM300).
• Optional electromagnetic shielding (PM300PS) for ultra-low-noise environments.
• Spacious, ergonomic design supporting up to 12 positioners.
• Upgradeable platform to support future testing needs.

The Polarity Inverters series provides a reliable solution for switching the output polarity of high power converters. Designed to work seamlessly with monopolar power supplies such as NGPS systems, these polarity switching units support current ratings up to 1000 A and voltage up to 250 V. With integrated safety interlocks and enabling signals, the system ensures secure polarity inversion for demanding industrial and scientific applications.

Key Features

• Reliable polarity switching for power converters up to 1000 A
• Maximum voltage rating of 250 V for high power applications
• Compatible with monopolar power supplies including NGPS systems
• Available in multiple current ratings including 200 A, 420 A, 630 A and 1000 A
• Auxiliary AC power input from 100 to 240 VAC at 50 or 60 Hz
• Integrated interlock and enabling signals for safe switching operations
• Supports control signals up to 240 V at 16 A and 10 A
• Designed for applications requiring polarity reversal such as magnet degaussing
• Standard rack mounting design with 19 inch enclosure options
• Durable industrial construction for reliable long term operation

The PS1112S Power Supply is a compact low noise power supply designed to deliver stable 12 V output for sensitive measurement and instrumentation systems. Built with a mixed switching linear architecture, this high efficiency unit ensures extremely low ripple and noise levels that help maintain measurement accuracy. With a maximum output power of 14 W and a robust stainless steel enclosure, the PS1112S Power Supply is an ideal solution for powering precision electronic devices and scientific instruments.

Key Features

• Low noise fixed voltage power supply with stable 12 V output
• Maximum output power of 14 W for precision electronic systems
• Maximum output current of 1.2 A depending on input conditions
• Mixed switching linear power architecture for low noise performance
• Extremely low ripple and noise in the DC to 1 MHz frequency range
• Compact and durable stainless steel enclosure
• Designed for accurate measurement and instrumentation systems
• High efficiency design while maintaining low noise operation
• Suitable for powering electrometers and precision measurement devices
• Optimized for laboratory and research equipment applications

The PS1215 Power Supply is a compact, high-precision dual-voltage power supply delivering ±15 V output for sensitive instrumentation. Engineered with a mixed switching-linear design, it ensures ultra-low noise performance for high-accuracy devices, particularly the 0-FLUCS current transducer series. Housed in a robust stainless steel enclosure, it provides 27 W of clean power while minimizing cable-related noise pickup, making it ideal for laboratory and research applications.

Key Features

• Dual-voltage output: ±15 V for precision instruments
• Maximum output power: 27 W with AC derating
• Ultra-low noise: 0.001 % for clean DC operation
• Mixed switching-linear design for efficiency and low ripple
• Compact and durable stainless steel enclosure
• Compatible with 0-FLUCS DC Current Transducer series
• Two cable options for voltage-output or current-output transducers
• Ideal for high-precision DCCT measurements
• Reduces cable length noise pickup for sensitive setups
• Optimized for laboratory and high-accuracy instrumentation

The QDS Quench Detection System is a 4-channel precision device designed for fast and reliable superconducting magnet protection. Each channel supports independent multi-range measurement, floating up to 100 V, and provides high-resolution data for both absolute and differential quench detection. Configurable detection windows from 1 ms to 1 s and Ethernet connectivity allow seamless control and integration with magnet power systems. Ideal for laboratories and industrial applications requiring high-accuracy magnet monitoring.

Key Features

• 4 independent floating channels up to 100 V
• Multi-tap precision measurement: ±20 V to ±20 mV ranges
• Ultra-high resolution: 2.4 μV to 2.5 nV
• Configurable detection windows from 1 ms to 1 s
• Absolute and differential quench detection modes
• 24-bit resolution and 100-kHz sampling rate per channel
• Fast 10/100/1000 Mbit Ethernet connectivity (TCP-IP/UDP)
• Interlock and output status signals for system integration
• Persistent Switch driver outputs: 12 V and 24 V
• Remote firmware updates via CAEN ELS website