Products

Cascade SUMMIT200 Advanced 200 mm Probe Station

Key Features:

• High-accuracy electrical measurements for DC, RF, mmW, and THz applications.
• Up to 5X faster time to accurate data with automated wafer handling.
• Wide thermal range from -60°C to +300°C with IceShield™.
• PureLine™, AttoGuard®, and MicroChamber® technologies for ultra-low noise performance.
• Precision sub-micron positioning with advanced 4-axis stage and VueTrack PRO.
• Flexible platform for device characterization, FA, WLR, and design debug.
• Velox control software with modern UI, workflow guide, and automation tools.
• Ergonomic operation with quick manual wafer access and roll-out stage.

Cascade TESLA300 is a 300 mm semi- and fully-automated probe system for advanced on-wafer power device characterization, ensuring safe, precise, and high-power testing.

Key Features:

• On-wafer device testing up to 10,000 V DC / 600 A
• AttoGuard™ and FemtoGuard™ chuck technologies for low-leakage, high-accuracy measurements
• MicroVac™ chuck ensures thin wafer stability and minimal contact resistance
• TÜV-certified safety system with full enclosure and interlocks
• Wide thermal range: -60°C to +300°C with TopHat chamber
• Roll-out chuck and auxiliary mounts for flexible wafer handling
• Remote operation and full software integration with Velox and analyzers
• Material Handling Unit (MHU301) for automated wafer loading and barcode recognition

Cascade CM300xi-SiPh Probe System – 300 mm Wafer and Die-Level Photonics Testing

Key Features:

• Integrated silicon photonics wafer and die-level probing solution.
• Autonomous SiPh Measurement Assistant for hands-free calibration.
• OptoVue™ technology for real-time, in-situ optical calibrations.
• Supports vertical, horizontal edge, and wafer-level edge coupling.
• Dark, shielded, frost-free environment with SiPh TopHat.
• Thermal capability from -40°C to +125°C.
• Exclusive SiPh-Tools and Photonics Controller Interface (PCI) software.
• Partnerships with Keysight and PI for precision instrumentation.
• Easy setup and automation with Velox and Velox Dash™ interface.

Cascade CM300xi-ULN Probe System – Ultra Low Noise 300 mm Wafer Prober

Key Features:

• Ultra-low noise measurements with patented PureLine™ 3 technology.
• Ideal for flicker noise (1/f), RTN, and phase noise testing of ultra-sensitive devices.
• Fully shielded MicroChamber™ for EMI/RFI protection and frost-free low-temperature operation.
• Plug-and-Go TestCell Power Management eliminating ground-loop noise.
• Autonomous 24/7 operation with optimized motorized probe positioners.
• Wide thermal range from -65°C to +300°C with fA/fF measurement precision.
• Integrated Velox software for simple, efficient automation.

A compact and flexible semi-automated wafer probe system designed for RF/DC modeling, device characterization, and advanced measurement needs.

Key Features:

• Mechanical platen lift for safer RF set-ups and reduced operator errors
• Fully compatible with Autonomous RF/DC measurement assistants and Velox Dash™ app
• Reconfigurable platen inserts (TopHat, PCH, IceShield) for versatile test configurations
• Spacious platen design supporting RF and DC setups with ease
• Compact footprint with field-upgradable components
• Integrated Low-Volume MicroChamber and FemtoGuard thermal triaxial chuck

Key Features

• Supports wafers up to 200 mm (optional 300 mm upgrade)
• Operates at cryogenic temperatures down to 10 K
• Semi-automated with optional full automation via autoloader
• Compatible with liquid nitrogen, liquid helium, or cryo-cooler
• Ice- and condensation-free probing for stable performance
• Up to eight probe positioners or probe card integration
• Solid vibration-isolated frame for precision measurements
• Velox software with intuitive alignment and automation

Key Features

• Entry-level manual wafer probing in vacuum < 1×10⁻⁴ mbar
• Supports wafers up to 150 mm or single dies
• Up to six probe positioners for flexible testing
• Optional thermal chuck from -60°C to +300°C
• Probing possible with open chamber lid at atmosphere
• Stable, vibration-isolated frame for precise results
• Ergonomic design with hinged topside lid for easy access
• Independent control of chuck stage and positioners
• Fast, manual step-and-repeat wafer testing

Cascade PM300 – 300 mm Analytical Probe Station

Key Features:

• Industry benchmark for manual wafer probing and failure analysis.
• Superior mechanical stability with granite base for precision and repeatability.
• High-precision probe positioning with independent X-Y coarse and fine adjustments.
• Configurable for DC, RF, mmW, WLR, FA, and 3D IC testing.
• Wide thermal range: -60°C to +200°C (PM300PS) / +15°C to +300°C (PM300).
• Optional electromagnetic shielding (PM300PS) for ultra-low-noise environments.
• Spacious, ergonomic design supporting up to 12 positioners.
• Upgradeable platform to support future testing needs.

Cascade TESLA300 – Advanced On-Wafer Power Device Characterization

Key Features:

• High-voltage and high-current testing up to 10 kV / 600 A.
• Integrated AttoGuard™ and FemtoGuard™ technology for ultra-low leakage and capacitance.
• MicroVac™ chuck surface for thin wafer handling and low contact resistance.
• TÜV-certified safety system with interlocks and full enclosure.
• Top-lift wafer loading eliminates lift pins for accurate vertical device measurements.
• Full thermal range from -60°C to +300°C with efficient transition times.
• Seamless integration with Keysight and Keithley analyzers.
• Remote operation capability for safe offsite control.
• Velox and Velox Dash™ software for intuitive automation.

Applications:

• Aerospace & Defense – Avionics, MIL-STD-704, EMC compliance, 400Hz & wild frequency testing
• EV Charging & V2G/V2H Testing – On-board chargers, grid-tied inverters, smart grid simulation
• Energy Storage & Renewable Systems – Home ESS, solar PV/grid-tied inverter testing
• Industrial Power Simulation – Frequency conversion, harmonic analysis, transient simulations
• Smart Grid & Compliance Testing – IEC 61000, RTCA DO-160, IEEE 1547, and more

Applications

• Aerospace & Avionics – Frequency conversion (400Hz & wild frequency testing), MIL-STD compliance
• EV Charging & Power Electronics – On-board chargers (OBC), V2G/V2H testing, battery simulation
• Renewable Energy Systems – Solar PV/grid-tied inverter testing, home ESS & smart grid simulations
• Power Supply & Industrial Testing – AC/DC power supply evaluation, network server & data center testing
• Research & Development Labs – High-frequency power testing, compliance verification, transient simulations

Applications

• Aerospace & Avionics Testing – 400Hz & wild frequency (360Hz-800Hz) compliance
• EV Charging & Power Electronics – AC/DC conversion, V2G, V2H, and OBC testing
• Renewable Energy & Smart Grid – Solar PV inverters, energy storage & grid simulation
• Industrial Power & Manufacturing – AC power supply testing, production line QA
• R&D & Compliance Labs – IEC61000, MIL-STD-704, RTCA DO-160 testing
• Railway Power Systems – 16.6Hz & 400Hz frequency compliance

High-Power 4-Quadrant AC & DC Power Source with Load Option

• Powerful & Versatile: 12kVA / kW to 21kVA / kW in a 4U chassis. Parallel units up to 168kVA/kW (single cabinet)or 252kVA/kW (dual cabinet).
• Multi-Phase Flexibility: Supports single-phase, split-phase, and three-phase configurations with AC, DC, or AC+DC output.
• Grid Simulation & Compliance Testing: Emulates real-world power grid conditions, simulating disturbances, harmonics, and interharmonics for accurate renewable energy testing (solar inverters, EV charging, microgrid, and UPS applications).
• Regenerative Efficiency: Over 90% energy recovery back to the grid reduces power consumption and operational costs.
• Advanced Control & Monitoring: SmartSource Suite enables remote control via an intuitive web browser interface with LAN, USB, GPIB, and RS232 connectivity.

High-Power 4-Quadrant AC & DC Power Source

• High Power Density: Available in 30kVA/kW, 45kVA/kW, and 55kVA/kW models, with parallel cabinets scaling up to 550kVA/kW.
• Versatile Output Capability: AC, DC, or AC+DC modes in single-phase, split-phase, or three-phase configurations.
• Dual Constant Power Voltage Ranges:
  • AC Voltage: 0-240V L-N / 0-415V L-L & 0-480V L-N / 0-830V L-L
  • DC Voltage: 0-340Vdc & 0-680Vdc
• Grid Compliance Testing: Meets global standards like IEEE 1547, UL 1741, IEC 61000-3, IEC 61000-4
• Regenerative Power Efficiency: >90% energy recovery back to the grid, reducing power waste and operational costs
• PHIL Interface for Hardware-in-the-Loop (HIL) Testing: High-speed analog I/O for real-time frequency, voltage, and current control.
• SmartSource Suite for Remote Testing: Web-based real-time monitoring and control via LAN, USB, GPIB, and RS232.

4-Quadrant Programmable Load with Energy Recovery

• Powerful & Scalable: 6kVA/kW to 21kVA/kW in a compact 4U chassis. Parallel units up to 168kVA/kW per cabinet or 252kVA/kW in dual cabinets.
• Versatile Load Simulation: AC and DC load capability with single-phase, split-phase, and three-phase configurations.
• Grid-Ready Compliance Testing: Supports IEEE 1547, UL 1741, IEC 61000-3, IEC 61000-4 compliance testing.
• Energy-Efficient Regeneration: Returns over 90% of absorbed power back to the grid, reducing operational costs.
• Dynamic Load Emulation: Simulates linear and non-linear loads, harmonics, transient conditions, and waveform distortions.
• High-Speed Smart Control: SmartSource Suite for real-time test automation and remote monitoring.

High-Power AC/DC Load Simulator with PHIL Interface

• Scalable Power Density: Available in 30kVA/kW, 45kVA/kW, and 55kVA/kW models, with parallel cabinets up to 550kVA/kW.
• Versatile AC/DC Load Capability: Supports single-phase, split-phase, three-phase, and multi-channel configurations.
• Dual Constant Power Voltage Ranges:
  • AC Voltage: 5-220V L-N / 9-380V L-L & 5-440V L-N / 9-760V L-L
  • DC Voltage: 0-335Vdc & 9-650Vdc
• Advanced PHIL Interface (Option H): High-speed analog I/O for real-time frequency, voltage, and current control.
• Regenerative Power Efficiency: Returns over 90% of absorbed energy back to the grid, reducing operational costs & heat dissipation.
• Dynamic Load Simulation: Simulates harmonics, transient conditions, and waveform distortions for real-world power testing.
• SmartSource Suite for Remote Control: Web-based monitoring and test automation via LAN, USB, GPIB, and RS232.