HIOKI E E CORPORATION

The Hioki PQ3198 Analyzer is a high-precision power quality analyzer designed to detect, log, and analyze electrical anomalies in single- to three-phase systems. Ideal for industrial equipment, EV chargers, and aviation systems, it ensures reliable troubleshooting and energy management.

Key Features

• IEC 61000-4-30 Ed.3 Class A compliant measurement
• High-accuracy voltage (±0.1%), current (±0.1%), and power (±0.2%) recording
• Detects voltage dips, swells, interruptions, frequency fluctuations, and inrush current
• Harmonics and supraharmonics measurement up to 80 kHz
• Transient voltage measurement up to 6000 V peak at 2 MS/s
• Two-circuit measurement with efficiency calculation
• GPS synchronization for multi-device setups (optional)
• Intuitive PQ ONE software for analysis and report creation
• Remote monitoring via GENNECT One and cloud-based services

Key Features:

• Industry-leading precision for OCV and AC-IR testing of EV battery cells
• Ultra-high resolution for advanced cell grading (down to 0.01 µΩ)
• Fast testing speeds with excellent reproducibility
• MIR mode enables parallel testing without interference
• Channel-specific correction and multiplexer support
• Reliable long-term system operation with route resistance monitoring
• Easy integration with existing systems (BT3562A command compatibility)
• Compact, lightweight design for lab or production lines

Key Features:

• Fastest insulation tester in the industry with results in as little as 50 ms
• Wide test voltage range: 25 V to 1000 V with 1 V resolution
• Quick residual voltage discharge for faster takt times
• Contact check function prevents false readings from poor connections
• Short-circuit check detects micro-shorts before testing
• Built-in LAN and RS-232C for system integration
• Compact, lightweight design ideal for battery and production line testing
• Models available: ST5520 (I/O output) and ST5520-01 (BCD output)

The Hioki VT1005 Divider allows safe, accurate measurement of high voltages up to 5000 V and evaluation of inverter efficiency with exceptional precision. Its broad frequency range, high noise immunity, and differential input design make it ideal for power system and high-voltage inverter applications.

Key Features

• Maximum input voltage: 5000 V AC/DC
• Differential input method for precise measurement
• ±0.08% DC accuracy, ±0.04% at 50/60 Hz, ±0.17% at 50 kHz
• Frequency band: DC to 4 MHz (-3 dB)
• Excellent amplitude flatness: ±0.1% up to 200 kHz
• Phase flatness: ±0.1° up to 500 kHz
• Noise resistance: CMRR 80 dB typical (100 kHz)
• Detects efficiency improvements on the order of 0.1%
• Safely measures high voltages that standard analyzers cannot handle

The Hioki PW4001 Analyzer is a portable, high-precision 4-channel power analyzer built for vehicle, motor, and inverter testing. It combines lab-grade measurement accuracy with field-ready portability, supporting high-frequency applications up to 600 kHz and real-world vehicle testing.

Key Features

• ±0.04% basic DC accuracy for precise measurements
• Frequency bandwidth from DC to 600 kHz
• Operates in harsh environments from -20°C to 50°C
• Auto phase shift correction for Hioki current sensors
• Direct CAN/CAN FD input and output for vehicle data acquisition
• Compact, portable design for field or lab use
• Motor and inverter efficiency evaluation with 1 ms data updates
• Direct voltage input up to 1500 V DC
• High-speed sampling at 2.5 MHz for waveform analysis

The Hioki IM7583 Impedance Analyzer is a high-speed, reliable LCR measurement device ideal for testing electronic components in high-volume production environments. It combines precision, compact design, and flexible operation for a wide range of applications.

Key Features

• Test frequency range: 1 MHz to 600 MHz
• Fastest analog test speed: 0.5 milliseconds
• Basic accuracy: ±0.65% rdg.
• Half-rack body with palm-sized test head for flexible placement
• RF I-V method for accurate impedance measurement
• Contact check with DCR testing, Hi-Z reject, or waveform judgment
• Frequency sweeps, level sweeps, and time interval measurements in Analyzer Mode
• Comparator function for automated PASS/FAIL judgments

The Hioki IM7585 Impedance Analyzer is a high-speed, high-precision LCR and impedance measurement device designed for R&D and production environments. It delivers fast, accurate testing of electronic components from 1 MHz to 1.3 GHz.

Key Features

• Test frequency range: 1 MHz to 1.3 GHz
• Fastest test speed: 0.5 milliseconds (analog measurement)
• Exceptional stability with 0.07% measured value variability at 1 GHz
• Basic accuracy: ±0.65% rdg.
• Half-rack body with a palm-sized test head for flexible placement
• RF I-V method for precise impedance analysis
• Contact check with DCR testing, Hi-Z reject, or waveform judgment
• Frequency sweeps, level sweeps, and time interval measurements in Analyzer Mode
• Comparator function for PASS/FAIL judgments

The Hioki IM9201 SMD Test Fixture is a high frequency test fixture designed exclusively for the IM7580 series impedance analyzers. Supporting six common SMD package sizes, it enables stable, repeatable impedance measurements up to 3 GHz for advanced component evaluation in R&D and production environments.

Key Features

• Designed exclusively for Hioki IM7580 series impedance analyzers
• Supports impedance measurement up to 3 GHz
• Accommodates six SMD package sizes in one fixture
• Dual device guides allow fast and accurate component placement
• Optimized for high frequency stability and repeatability
• Ideal for RF components, ferrite beads, and chip inductors

A high-speed, high-precision LCR meter ideal for low-ESR and impedance testing in advanced electronic components like polymer capacitors, inductors, and piezoelectric elements.

Key Features:

• Continuous LCR/DCR/sweep measurements with one instrument
• Ultra-fast testing speeds: 1.5 ms (1 kHz), 0.5 ms (100 kHz)
• High accuracy: ±0.08% basic accuracy for Z parameter
• Ideal for low-ESR measurement of functional polymer capacitors
• Suitable for resonance testing of piezoelectric elements
• Accurate DCR and L-Q testing of inductors, coils, and transformers

The Hioki IM7580A is a compact, high-speed impedance analyzer for 1 MHz to 300 MHz testing, ideal for both production and R&D. It works seamlessly with the IM9201 SMD fixture for reliable component testing.

Key Features:

• 1 MHz to 300 MHz frequency range
• 0.5 ms test speed
• ±0.72% basic accuracy
• Compact half-rack size with palm-sized test head
• Reliable contact check functions
• Frequency, level, and time sweeps in Analyzer Mode
• RF I-V method for precise measurement

The Hioki IM7581 is a compact, high-speed impedance analyzer designed for accurate testing from 100 kHz to 300 MHz. It’s ideal for both production and development environments.

Key Features:

• 100 kHz to 300 MHz frequency range
• 0.5 ms fastest test speed
• ±0.72% basic accuracy
• Compact half-rack size, palm-sized test head
• Reliable contact check via DCR, Hi-Z reject, or waveform judgment
• Supports frequency, level, and time sweeps in Analyzer Mode
• Uses RF I-V method for precise measurement

The Hioki Impedance Analyzer IM7587 3 GHz provides precision, speed, and versatility for impedance measurements from 1 MHz to 3 GHz, ideal for both R&D and mass production applications in electronic component testing.

Key Features:

• Frequency range: 1 MHz to 3 GHz
• Test speed: 0.5 ms
• Measurement variability: 0.07%
• Basic accuracy: ±0.65% reading
• RF I-V measurement technique
• Compact half-rack design with palm-sized test head
• Robust contact check capabilities
• Analyzer mode: frequency and level sweeps, time interval measurements

The Hioki LR8432 Heat Flow Logger is a compact, lightweight, 10-channel data logger designed to visualize heat flow and analyze the root causes of temperature change. It supports accurate heat energy measurement for thermal performance evaluation in automotive, construction, and R&D environments.

Key Features

• Measures heat flow using dedicated heat flow sensors
• Records temperature and voltage simultaneously
• Ten fully isolated analog input channels for stable measurements
• Fast 10 ms sampling across all channels
• Simultaneous recording of raw and calculated waveforms
• Supports heat transmission coefficient calculations
• Dual gauge display for easy comparison of heat flow and temperature
• Data recording to USB flash drive or CompactFlash card
• Ideal for insulation evaluation and thermal performance analysis

The Hioki LR8512 Wireless Pulse Logger is a compact, 2-channel device designed for pulse integration and RPM measurement. It’s ideal for monitoring vehicle speed, flow rates, and other ON/OFF signal applications, providing real-time data collection and wireless convenience.

Key Features

• Measures pulse totalization, logical ON/OFF signals, and revolutions
• Compact, 2-channel design for tight installation spaces
• Bluetooth® wireless connectivity for tablet or PC data download
• Three-way power: AC adapter, AA batteries, or external 5–13.5 V supply
• Stores up to 500,000 data points per channel
• Real-time monitoring with waveform and numerical trend display
• Optional magnetic strap for wall or equipment mounting
• Ideal for automotive, air conditioning, cogeneration, and fluid flow measurement

The Hioki LR8512 Wireless Pulse Logger is a compact, two-channel solution designed for pulse integration and RPM measurement in flow and speed applications. With Bluetooth connectivity and long battery life, it enables easy data collection in locations where wiring is difficult or unsafe.

Key Features

• Measures pulse signals for flow rate and rotational speed analysis
• Ideal for pulse integration and RPM measurement applications
• Two-channel compact design for flexible installation
• Wireless Bluetooth data transfer to smartphone, tablet, or PC
• Real-time and historical waveform viewing capability
• Large internal memory storing up to 500,000 data points per channel
• Long battery operation up to 14 days with AA batteries
• Optional magnetic mounting for easy placement anywhere

The Hioki LR8513 Wireless Clamp Logger is a compact, 2-channel device designed for accurate, wireless measurement of AC/DC load currents and AC leakage currents. It’s ideal for industrial, automotive, and PV system maintenance applications where real-time monitoring and safety are essential.

Key Features

• Measures AC/DC load current and AC leakage current
• Supports a wide variety of current sensors
• Safe measurement inside distribution panels with closed covers
• Simple power calculations using voltage and power factor
• Compact, 2-channel design for tight spaces
• Bluetooth® wireless connectivity for tablet or PC data download
• Three-way power: AC adapter, AA batteries, or external 5–13.5 V supply
• Stores up to 500,000 data points per channel
• Real-time waveform monitoring and historical data review
• Optional magnetic strap for flexible installation