1 800 665 7301 | info@tmetrix.com

Uncategorized

Showing 1–16 of 30 results


    • Versatile Current Sensing: Accurately measure small and large currents, from sub-milliamp levels to thousands of amps.
    • High-Speed Pulse Monitoring: Patented distributed termination technology enables ultra-fast rise time measurement (as short as 2ns).
    • Enhanced Noise Immunity & Safety: Double shielding minimizes external noise, making these monitors ideal for high-voltage applications.
    • Robust Construction: Sealed models are suitable for high-voltage insulating oil or vacuum environments.
    • Broad Compatibility: Works with oscilloscopes, spectrum analyzers, power analyzers, digital voltmeters, ADCs, and more.

     

  • High-Precision Current Measurement with BNC Connectivity

    • Precision Current Sensing: ±1% accuracy ensures reliable real-time current monitoring.
    • BNC Connector for Seamless Connectivity: Works with oscilloscopes, ADCs, spectrum analyzers, and power analyzers.
    • Clamp-On Design for Non-Intrusive Measurement: Safely monitor live current flow without circuit disruption.
    • 50 Ohm Termination Compatible: Output reduces by half when using a 50Ω termination.
    • High-Voltage Safety Considerations: Conductive case requires adequate insulation for user safety.

     

  • High-Precision Voltage Measurement Up to 500kV

    • High-Voltage Measurement Capability: Supports up to 500kV in insulating oil and customizable calibration for air use.
    • Precision Division Ratios: Models with 5000:1, 10,000:1, and custom ratios, ensuring reliable voltage scaling.
    • Temperature-Compensated Accuracy: ±1% over 20°C to 80°C, providing stable voltage readings.
    • Robust Design for Harsh Environments: Sealed for high-voltage insulating oil use, with custom air calibration available.
    • Safe Operation with Ground Loop Control: The outer conductor is isolated from the case, allowing controlled grounding connections.

     

  • Precision Pulse Output Up to 500kV

    • Wide Voltage Range: Supports 100kV to 500kV pulse outputs for high-energy applications.
    • Fast Pulse Transmission: Pulse durations from 0.25 to 50 microseconds, ensuring efficient energy transfer.
    • Insulating Oil Immersion: Open-construction design for operation in high-voltage insulating oil, reducing breakdown risks.
    • Advanced Overvoltage Protection: Designed with built-in safety factors (50-100%) to prevent damage from overvoltages.
    • Reliable Flashover Protection: Corona ring-to-core insulation prevents damage from accidental flashovers.

     

  • Multi-Range DC Power Supply with digital control, 3 or 4 Outputs, 315 to 420W with/without Remote Interfaces

    • hree or four high performance outputs each with full functionality
    • Range switching gives variable voltage/current combinations
    • Shared power mode provides double power from a single output
    • Low output noise and ripple via linear final regulation
    • High setting resolution of up to 1mV and 0.1mA
    • Variable OVP and OCP trips on all outputs
    • 50 setting memories per output plus 50 linked memories
    • Selectable voltage tracking (isolated tracking)
    • Selectable current meter averaging
    • Switchable remote sense capability
    • Graphic LCD provides simultaneous output metering
    • Numeric or spin-wheel control of all parameters
    • Individual or combined output on/off control with programmable delay sequencing.
    • 3U half-rack case for bench or rack mounting (4U rack kit accessory available)
    • RS-232, USB and LAN (LXI) interfaces (P models), GPIB option
    • Duplicate power & sense terminals at rear (P models)

     

  • with 10MHz to 3.6 or 6.0GHz bandwidth options

    True hand-held battery powered RF spectrum analyzers.

    • 10MHz to 3600MHz or 6000MHz frequency range
    • Resolution bandwidths from 300Hz to 10MHz (1:3:10)
    • -120dBm typical noise floor at -40dBm ref. level/10kHz RBW
    • Measurement in dBm or dBµV, mV or µW
    • Zero span mode with AM and FM audio demodulation
    • Trace modes of normal, peak hold and trace average
    • Live, View and Reference traces in contrasting colours
    • Twin markers with readout of absolute & difference values
    • Smart marker movement with selectable peak tracking
    • Frequency counter with down to 10Hz resolution
    • Frequency presets and independent state storage
    • Auto-find automatically sets sweep parameters for the highest signal found
    • Unlimited storage for waveforms, set-ups and screens
    • User assignable file names, file stamping from real-time clock
    • USB interfaces for Flash drives and PC connection
    • Comprehensive status and context sensitive help screens
    • Rechargeable lithium ion battery giving more than 3 hours continuous operation from a charge
    • Smaller and lighter than other spectrum analyzers (weight only 0.56 kg)

     

  • DC Power Supply single output, 80V/50A 750W PowerFlex+, LAN & USB interfaces, GPIB Option

    • Wide range of voltage/current combinations
    • Up to 80V and up to 50A within the same power envelope
    • Low output ripple and noise of <3mV rms at full power
    • High setting resolution of 1mV
    • Analogue control interfaces for voltage and current
    • Bench or rack mounting, front and rear terminals
    • LAN (LXI), USB, GPIB interfaces (GPIB optional on QPX750SP)

     

    • 150kHz to 3GHz (TGR2053) and 150kHz to 1.5GHz (TGR2051) frequency range
    • High signal purity, phase noise <-117dBc/Hz (typical) at 1GHz output and 10kHz offset
    • Amplitude range of -127dBm to +13dBm
    • 0.1dBm amplitude setting resolution
    • Internal or external analogue modulations (AM, FM, PM)
    • Amplitude can be set in dBm, dBμV or in linear Volts.
    • Internal or external digital modulations – ASK, OOK, FSK, 3FSK, 4FSK, GFSK, MSK, GMSK, HMSK & PSK with U01 option
    • Modulation Synchronisation
    • Fast amplitude and/or frequency sweeps with comprehensive triggering
    • 5ms sweep settling time
    • 1ppm frequency accuracy, <1ppm drift in first year
    • Modulation waveform output on the rear panel
    • Internal waveforms include: Sine, Square, Ramp, Triangle, PRBS (various lengths) and user-defined pattern
    • Simple operation with the colour touch screen
    • Programmable via USB, LAN (LXI) and GPIB (optional), SCPI compatible
    • Compatible with previous Aim-TTi RF generators

     

    • 3GHz RF analog signal generator
    • AM, FM, PM, Sweep & Pulse Modulation
    • Exceptionally Low Phase Noise of -145dBc/Hz @100MHz and 10@kHz offset
    • Field ready, with 10” touch screen suited for day and night use and 2 hour battery operation
    • Remotely programmable via MATLAB, Python, LabVIEW and other software programming environments.
    • Removable uSD card for instrument security

     

    • 20 Amp Operation: Full performance with 20 amp service
    • Automatic Power Reduction: Reduces power usage during idle periods
    • Heat Only Mode: Reduces power usage when cold temperatures are not used
    • WhisperStream Technology: quieter, smooth-sounding operation, 56 dBA
    • Frost Free Test Environment: dry air purge for tester interface, prevents condensation:
      0.5 to 3scfm (0.25 to 1.5 l/s)
    • Heated Defrost: quickly removes moisture buildup from internal chiller
    • DUT Temperature Control : Proprietary control algorithm enables DUT temperature to be directly controlled
    • Transition Rate*
      -55 to +125°C, approx. 10 seconds
      125 to -55°C, approx. 10 seconds
    • System Airflow Output*
      4 to 18scfm (1.9 to 8.5 l/s) Continuous
    • Temperature Range*
      -80 to +225°C (60Hz) No LN2 or LCO2 Required

     

    • High reliability thermal cycling without thermoelectric modules
    • Temperature range: -65 to 175°C
    • Cooling power:
      • 40W at -40°C for lower power devices
      • 55W at -55°C and 120W at -40°C.
    • Transition rate: up to <35 sec over 25 to -40°C
    • Easy and secure thermal connection to in-circuit or test socked DUT
    • Touch-screen controller: user-programmable temperatures, graphing, data logging
    • Communications options: Ethernet, USB, IEEE, RS232

     

  • -60° to +200°C

    • Economy model with high thermal capacity
    • Precise temperatures with fast transitions from -60 to 200°C
    • No annual leak testing required per EU 517/2014 F-Gas Regulation
    • Effective testing and conditioning of electronic components, boards, and modules
    • Available for 50 and 60Hz operation
    • No need for Liquid Nitrogen (LN2) or Liquid Carbon Dioxide (LCO2)
    • Remote communications and set up and touch screen operation
    • User Defined Temperature Limits

     

     

    • High voltage output to 300Vp-p (±150V)
    • Output current to 150 mA
    • Full power bandwidth from DC to >500kHz
    • Slew rate to 200V/µs
    • Low distortion
    • Low cost
    • Custom Configuration of gain and signal Ground

     

    • Single channel
    • High voltage output to 400Vp-p (±200V)
    • Output current to 125 mA
    • Full power bandwidth from DC to >500kHz
    • Slew rate to 400V/µs
    • Monitor Output
    • Precise signal amplification for multiple applications
    • Compatible with any of the Tabor waveform generators

     

    • High voltage output to 300Vp-p (±150V)
    • Output current to 100 mA per channel
    • Full power bandwidth from DC to >500kHz
    • Slew rate to 200V/µs
    • Low distortion
    • Low cost
    • Custom Configuration of: Gain, Signal Ground

     

    • 12GHz RF Analog Signal Generator
    • Extremely fast switching speed of <100μs
    • AM, FM, PM Sweep & Pulse Modulation
    • Extra small, compact module platform
    • Exceptionally Low Phase Noise of -145dBc/Hz @100MHz and 10@kHz offset
    • SPI and micro-USB integrated interfaces
    • Remotely programmable via MATLAB, Python, LabVIEW
    • and other software programming environments.
    • Flixible modular platform for OEM and custom requirements
    • and applications, to satisfy specific customer demands.
    • Multi instrument synchronization capability

     


Showing 1–16 of 30 results