Discount Products: Look through products available for a 25% – 50% discount in 2020. The items provided on a first come, first serve basis. View Discounted Products
Model 9100 is a Single/Dual Channel, 2U, half-rack size, bench-top power amplifier designed for signal amplification. With unprecedented signal purity, Model 9100 amplifies signals from DC to over 500kHz. The unit has a fixed gain of x15 however the same amplifier is available with custom gain and no signal purity or performance degradation whatsoever.
Model 9100 operates as an amplifying buffer for signals emitted from waveform, function, or pulse generators. Most of these generators produce signals limited to 20Vp-p into high impedance. Model 9100 can convert these voltages to levels as high as 300Vp-p. The amplifier has a current driving capability of ±150mA from a 0.1? source. While the output can drive small capacitive or inductive loads, for full high speed potential it is recommended that the load characteristics should be mainly resistive. Model 9100 can withstand load capacitance and inductance up to 0.01µF and 0.5 mH without any performance deterioration.
The advanced power amplifier is supplied with floating input and output connectors allowing flotation from ground level up to 250VDC. The only limitation is that both the input and output grounds must connect to the same level. This capability is extremely important in applications where the amplifying device must reside on the same ground level as its source. The floating capability can be added or removed using a simple, user-accessible, jumper connection.
The amplifier case was designed to stack on top or below other Tabor products. It can also be mounted alongside a Tabor generator in a standard 19″ rack. The waveform-amplifier combo is an ideal solution for virtually any high-voltage, wide bandwidth application.
Model 9100 power amplifier is yet another of Tabor`s cost-effective solutions for a full range of high voltage applications.
ACA TMetrix Inc. is a leading Canadian distributor of test and measurement instruments and design tools. For over 55 years we have provided products manufactured by the world’s leading instrument manufacturers. Leading Distributor of Design Tools and Test Equipment in Canada.
|9100-15-G(1)||300Vp-p Single-Channel Signal Amplifier|
|Gain||15 = x15, 20 = 20Vp-p, fixed(2)|
|Signal Ground||G = Grounded, F = Floating|
|S-Rack mount||19″ Single Rack Mounting Kit|
|D-Rack mount||19″ Dual Rack Mounting Kit|
|Case Kit||Professional Carry Bag|
(1) Standard configuration.
(2) Custom gain from x10 to x20 can be ordered however, bandwidth cannot be maintained. Consult the factory before ordering gain above 15.
Note: Options and Accessories must be specified at the time of your purchase.Datasheet