Uncategorized

Key Features:

• Fully automated battery testing for large cells and mid-sized packs up to 100 V
• Simultaneous measurement of internal resistance (AC-IR) and open-circuit voltage (OCV)
• Wide resistance range: 3 mΩ to 3.1 kΩ with 0.1 μΩ resolution
• Voltage measurement ranges: 6 V, 60 V, and 100 V with high precision
• Equipped with LAN interface for production line integration
• Fast, accurate AC four-terminal method
• Resistant to static electricity (±30 kV contact discharge)
• Ideal for production, shipping inspection, and quality control

Key Features:

• Fastest insulation tester in the industry with results in as little as 50 ms
• Wide test voltage range: 25 V to 1000 V with 1 V resolution
• Quick residual voltage discharge for faster takt times
• Contact check function prevents false readings from poor connections
• Short-circuit check detects micro-shorts before testing
• Built-in LAN and RS-232C for system integration
• Compact, lightweight design ideal for battery and production line testing
• Models available: ST5520 (I/O output) and ST5520-01 (BCD output)

A professional-grade video generator designed for testing Dolby Vision, HDR, and DSC on DisplayPort™ 1.4a sink devices. Ideal for R&D debugging, compliance testing, and high-resolution validation.

Key Features:

• Supports 8K @ 30 Hz and 4K @ 120 Hz resolutions (8K @ 60 Hz with DSC)
• DP 1.4a Link Layer CTS tool for sink testing*
• HDCP 2.2/2.3 CTS tool for transmitter compliance*
• HDR and Dolby Vision test capability with 32 GB extended memory
• Supports DSC, FEC, LTTPR, and MST (4 streams)
• USB-C output with included converter
• No restrictions on video format, audio format, frame rate, or infoframes

A versatile and cost-effective interoperability test solution for HDMI 1.4 source devices, designed to streamline R&D debugging and automated testing.

Key Features:

• HDMI 1.4 and DisplayPort interface support
• Compatible with TSI Test System Interface API
• Ready-made test routines for streamlined functionality testing
• Comprehensive analysis of video, audio, CEC, and metadata
• Ideal for testing Blu-Ray players, laptops, set-top boxes, game consoles, and tablets
• Supports both R&D debugging and test automation environments

The Hioki SP7001 and SP7002 Non-Contact CAN Sensors revolutionize CAN bus signal acquisition by eliminating the need to strip wire insulation or use sub-harnesses. Designed for effortless data capture, these sensors utilize advanced non-contact technology to accurately acquire CAN and CAN FD signals from vehicle buses, ensuring wires remain undamaged and the CAN bus unaffected. With support for a wide operating temperature range (-40°C to 85°C) and robust vibration resistance, these sensors are ideal for automotive development, evaluation, and on-road testing.

• 16K Video Generator & Analyzer
• Dolby Vision™, HDR 10 and HDR 10+
• validating DP 1.4a & DP 2.0 Link Layer on DP Sinks and Sources
• Power Input +12 Vdc (AC/DC converter included)
• Module Size/Weight TBD for Weight and Size

• Compact sized DisplayPort™ 1.2 compliant Reference Sink
• HBR2 and MST capable Sink and Branch device
• Cerified as the platform for DP 1.2 LL CTS Ext1 tests
• Optional MST Debug panel and AUX Channel Monitor
• Debug and Test Controller GUI enables monitoring and previewing any MST stream
• User programmable EDID and DPCD

•  HDMI 2.1 Test Equipment (FRL)
• Enhanced Gaming Features (VRR, ALLM)
• FEC, Forward Error Correction
• HDCP 2.2 & HDCP 2.3 support  TMDS Support
• Dolby Vision™ Test Tool
• 8K@60 fps Support (12 Gbps/channel)
• eARC Support (end of 2019)
• DSC Support (ESTIMATED 2020)
• UCD Console GUI for debugging
• High level API for easy integreation

• Automated tests for USB-C™ DisplayPort™ Alt Mode
• Electrical Test to verify whole USB-C connector with single cable insert
• Test USB 2.0 and USB 3.0
• 4K@60 support
• Easily set test parameters with provided Software
• Easily run tests from the commandline
• Unigraf’s Test System Interface (TSI) Support
• Third Part Test Management Software
• Support e.g. NI TestStand Support

• UHD / 4K compliant test equipment
• HDMI 2.0 and DP 1.2 input and output in one unit
• DCP Approved HDCP 2.3 CTS Test Tool
• HDCP 1.3 and HDCP 2.3 support
• Sink and source video, audio and configuration parameters
• USB 3.0 connected
• UCD Console GUI for debugging
• High level API for easy integration

• Test DP over USB-C video and audio
• Test USB-C Power Delivery with DP Alt Mode
• DCP Apporved HDCP 2.3 CTS Tests
• Verify interface signal continuity
• 4K@60 support
• HDCP 1.3 and HDCP 2.3 support
• Capture video and audio, monitor and control interface parameters
• USB signal pass-thru
• UCD Console GUI for debugging
• High level API for easy integration

• VESA Certified DP 1.4 Link Layer CTS Test Tool
• DCP Approved HDCP 2.3 CTS Tool
• 8K and 4K Reference Sink, Source & Repeater
• DP 1.4 / HBR3 input and output in one unit
• USB-C input and output with supplied converter cable
• MST support (4 streams)
• DSC Sink, FEC and LTTPR support
• HDCP 1.3 and HDCP 2.3 support
• High level API for easy integration

USB-C DisplayPort Alt Mode Test Unit DP 1.4a, HBR3 & PD 3.0

• 8K and 4K Reference Sink & Source
• DP 1.4a Link Layer CTS for Sinks & Sources
• HDCP 2.3 CTS for Transmitters & Receivers
• DP 1.4a features:
  * Up to HBR3 simultaneous input and output in one unit
  * DSC Sink & Source with off-line encoding and decoding
  * FEC and LTTPR support
  * MST support (4 streams)
• USB-C v1.3 with Power Delivery 3.0
  * DP Alt Mode
  * Capable to sink & source 9V@3A
  * PD Role swaps supported
• USB3.2Gen2 (10Gbit/s) bypass between test interfaces
• HDCP 1.3 and HDCP 2.3 support