PRODUCTS
TMetrix carries the following test and measurement products:
SERVICES
Explore our range of technical support and calibration services:
1 800 665 7301 | info@tmetrix.com

About Us | Events | Support | Resource Centre | Line Card | News | Blog | Contact Us

Products

  • CHEMICAL IMPEDANCE ANALYZER IM3590
    CHEMICAL IMPEDANCE ANALYZER IM3590 - 2
    Quick View
    HIOKI E E CORPORATION CHEMICAL IMPEDANCE ANALYZER IM3590 USD $ 10,397.52

    A high-performance analyzer designed for R&D applications involving electrochemical components, materials, batteries, and EDLCs. It enables precise impedance measurements essential for advanced evaluation and development.

    Key Features:

    • Wide frequency range: 1 mHz to 200 kHz for detailed ion and solution behavior analysis
    • Dual function: High-speed continuous LCR and sweep measurements with one device
    • Battery analysis: Measures internal impedance under no-load conditions
    • Ultra-fast sweep: Perform measurements in as little as 2 ms
    • High accuracy: ±0.05% basic precision for reliable R&D and testing
    • Advanced analysis: Supports Cole-Cole plots and equivalent-circuit modeling for electrochemical studies
    Learn More
  • EQUIVALENT CIRCUIT ANALYSIS FIRMWARE IM9000
    EQUIVALENT CIRCUIT ANALYSIS FIRMWARE IM9000
    Quick View
    HIOKI E E CORPORATION EQUIVALENT CIRCUIT ANALYSIS FIRMWARE IM9000 USD $ 1,751.73

    An advanced firmware upgrade for the IM3570 that enables quick and accurate equivalent circuit analysis, ideal for in-depth component evaluation and quality control.

    Key Features:

    • Automatically selects the optimal equivalent circuit model from five typical options
    • Minimizes discrepancies between measured and ideal frequency characteristics
    • Determines acceptance/rejection of L, C, and R elements with precision
    • Evaluates resonance sharpness (mechanical quality coefficient)
    • Enables detailed analysis of piezoelectric elements and inductors through resonance
    Learn More
  • IMPEDANCE ANALYZER IM3570
    IMPEDANCE ANALYZER IM3570
    Quick View
    HIOKI E E CORPORATION IMPEDANCE ANALYZER IM3570 USD $ 11,179.47

    A high-speed, high-precision LCR meter ideal for low-ESR and impedance testing in advanced electronic components like polymer capacitors, inductors, and piezoelectric elements.

    Key Features:

    • Continuous LCR/DCR/sweep measurements with one instrument
    • Ultra-fast testing speeds: 1.5 ms (1 kHz), 0.5 ms (100 kHz)
    • High accuracy: ±0.08% basic accuracy for Z parameter
    • Ideal for low-ESR measurement of functional polymer capacitors
    • Suitable for resonance testing of piezoelectric elements
    • Accurate DCR and L-Q testing of inductors, coils, and transformers
    Learn More
  • IMPEDANCE ANALYZER IM7580A
    IMPEDANCE ANALYZER IM7580A - 2
    Quick View
    HIOKI E E CORPORATION IMPEDANCE ANALYZER IM7580A USD $ 14,517.66

    The Hioki IM7580A is a compact, high-speed impedance analyzer for 1 MHz to 300 MHz testing, ideal for both production and R&D. It works seamlessly with the IM9201 SMD fixture for reliable component testing.

    Key Features:

    • 1 MHz to 300 MHz frequency range
    • 0.5 ms test speed
    • ±0.72% basic accuracy
    • Compact half-rack size with palm-sized test head
    • Reliable contact check functions
    • Frequency, level, and time sweeps in Analyzer Mode
    • RF I-V method for precise measurement
    Learn More
  • IMPEDANCE ANALYZER IM7581
    IMPEDANCE ANALYZER IM7581 - 2
    Quick View
    HIOKI E E CORPORATION IMPEDANCE ANALYZER IM7581 USD $ 17,671.64

    The Hioki IM7581 is a compact, high-speed impedance analyzer designed for accurate testing from 100 kHz to 300 MHz. It’s ideal for both production and development environments.

    Key Features:

    • 100 kHz to 300 MHz frequency range
    • 0.5 ms fastest test speed
    • ±0.72% basic accuracy
    • Compact half-rack size, palm-sized test head
    • Reliable contact check via DCR, Hi-Z reject, or waveform judgment
    • Supports frequency, level, and time sweeps in Analyzer Mode
    • Uses RF I-V method for precise measurement
    Learn More
  • Impedance Analyzer IM7587 3 GHz
    Impedance Analyzer IM7587 3 GHz
    Quick View
    HIOKI E E CORPORATION IMPEDANCE ANALYZER IM7587 3 GHz USD $ 29,638.88

    The Hioki Impedance Analyzer IM7587 3 GHz provides precision, speed, and versatility for impedance measurements from 1 MHz to 3 GHz, ideal for both R&D and mass production applications in electronic component testing.

    Key Features:

    • Frequency range: 1 MHz to 3 GHz
    • Test speed: 0.5 ms
    • Measurement variability: 0.07%
    • Basic accuracy: ±0.65% reading
    • RF I-V measurement technique
    • Compact half-rack design with palm-sized test head
    • Robust contact check capabilities
    • Analyzer mode: frequency and level sweeps, time interval measurements
    Learn More
  • AGX Regenerative AC & DC Power Source
    AGX Regenerative AC & DC Power Source
    Quick View
    Pacific Power Source Inc. AGX Series: All-in-One Regenerative AC & DC Power Source

    Applications:

    • Aerospace & Defense – Avionics, MIL-STD-704, EMC compliance, 400Hz & wild frequency testing
    • EV Charging & V2G/V2H Testing – On-board chargers, grid-tied inverters, smart grid simulation
    • Energy Storage & Renewable Systems – Home ESS, solar PV/grid-tied inverter testing
    • Industrial Power Simulation – Frequency conversion, harmonic analysis, transient simulations
    • Smart Grid & Compliance Testing – IEC 61000, RTCA DO-160, IEEE 1547, and more

     

    Learn More
  • AFX Series: AC & DC Power Source
    Quick View
    Pacific Power Source Inc. AFX Series: High Power, Energy-Efficient AC & DC Power Source

    Applications

    • Aerospace & Avionics – Frequency conversion (400Hz & wild frequency testing), MIL-STD compliance
    • EV Charging & Power Electronics – On-board chargers (OBC), V2G/V2H testing, battery simulation
    • Renewable Energy Systems – Solar PV/grid-tied inverter testing, home ESS & smart grid simulations
    • Power Supply & Industrial Testing – AC/DC power supply evaluation, network server & data center testing
    • Research & Development Labs – High-frequency power testing, compliance verification, transient simulations

     

    Learn More
  •
    Quick View
    Pacific Power Source Inc. ADF Series: High-Performance Programmable AC Power Source

    Applications

    • Aerospace & Avionics Testing – 400Hz & wild frequency (360Hz-800Hz) compliance
    • EV Charging & Power Electronics – AC/DC conversion, V2G, V2H, and OBC testing
    • Renewable Energy & Smart Grid – Solar PV inverters, energy storage & grid simulation
    • Industrial Power & Manufacturing – AC power supply testing, production line QA
    • R&D & Compliance Labs – IEC61000, MIL-STD-704, RTCA DO-160 testing
    • Railway Power Systems – 16.6Hz & 400Hz frequency compliance

     

    Learn More
  • RGS Series: Regenerative Grid Simulator frm TMetrix in Canada
    Quick View
    Pacific Power Source Inc. Regenerative Grid Simulator RGS Series

    High-Power 4-Quadrant AC & DC Power Source with Load Option

    • Powerful & Versatile: 12kVA / kW to 21kVA / kW in a 4U chassis. Parallel units up to 168kVA/kW (single cabinet)or 252kVA/kW (dual cabinet).
    • Multi-Phase Flexibility: Supports single-phase, split-phase, and three-phase configurations with AC, DC, or AC+DC output.
    • Grid Simulation & Compliance Testing: Emulates real-world power grid conditions, simulating disturbances, harmonics, and interharmonics for accurate renewable energy testing (solar inverters, EV charging, microgrid, and UPS applications).
    • Regenerative Efficiency: Over 90% energy recovery back to the grid reduces power consumption and operational costs.
    • Advanced Control & Monitoring: SmartSource Suite enables remote control via an intuitive web browser interface with LAN, USB, GPIB, and RS232 connectivity.

     

    Learn More
  • RLS Series_ Regenerative AC_DC Load Simulator
    Quick View
    Pacific Power Source Inc. Regenerative AC/DC Load Simulator – RLS Series

    4-Quadrant Programmable Load with Energy Recovery

    • Powerful & Scalable: 6kVA/kW to 21kVA/kW in a compact 4U chassis. Parallel units up to 168kVA/kW per cabinet or 252kVA/kW in dual cabinets.
    • Versatile Load Simulation: AC and DC load capability with single-phase, split-phase, and three-phase configurations.
    • Grid-Ready Compliance Testing: Supports IEEE 1547, UL 1741, IEC 61000-3, IEC 61000-4 compliance testing.
    • Energy-Efficient Regeneration: Returns over 90% of absorbed power back to the grid, reducing operational costs.
    • Dynamic Load Emulation: Simulates linear and non-linear loads, harmonics, transient conditions, and waveform distortions.
    • High-Speed Smart Control: SmartSource Suite for real-time test automation and remote monitoring.

     

    Learn More
  •
    Quick View
    Pacific Power Source Inc. Regenerative Electronic Load – ELZ Series

    High-Power AC/DC Load Simulator with PHIL Interface

    • Scalable Power Density: Available in 30kVA/kW, 45kVA/kW, and 55kVA/kW models, with parallel cabinets up to 550kVA/kW.
    • Versatile AC/DC Load Capability: Supports single-phase, split-phase, three-phase, and multi-channel configurations.
    • Dual Constant Power Voltage Ranges:
      • AC Voltage: 5-220V L-N / 9-380V L-L & 5-440V L-N / 9-760V L-L
      • DC Voltage: 0-335Vdc & 9-650Vdc
    • Advanced PHIL Interface (Option H): High-speed analog I/O for real-time frequency, voltage, and current control.
    • Regenerative Power Efficiency: Returns over 90% of absorbed energy back to the grid, reducing operational costs & heat dissipation.
    • Dynamic Load Simulation: Simulates harmonics, transient conditions, and waveform distortions for real-world power testing.
    • SmartSource Suite for Remote Control: Web-based monitoring and test automation via LAN, USB, GPIB, and RS232.

     

    Learn More
  • regenerative AC DC power source AZX Series
    regenerative AC DC power source AZX Series
    Quick View
    Pacific Power Source Inc. Regenerative AC DC Power Source – AZX

    The AZX Series (Regenerative AC / DC Power Source) is a family of high power, single, split and three phase, AC, DC and AC+DC output capable Power Sources with full energy recovery to the AC mains when sinking power from the equipment under test. Available models range from 30 kVA to 440 kVA. Using a modern color touch screen based user interface for ease of use, the AZX Series is cost effective and fully programmable for both basic frequency conversion and advanced AC power line or DC power disturbance test applications requiring up to 1000 Hz fundamental frequency.

    The energy recovery capability allows both sourcing and sinking of current and power up to 100% of rated power. Adding the Load Option (Option L) adds full electronic regenerative AC & DC Load programming capability to the AZX.

     

    Learn More
  • MOHR CT100B Series TDR Cable Analyzers
    MOHR CT100B Series TDR Cable Analyzers
    Quick View

    MOHR CT100B Series TDR Cable Analyzers

    High‐Resolution Portable TDR with Frequency‐Domain Analysis Tools

    Ideal for testing all types of microwave/RF and digital cables and connectors

    • Rugged portable TDR with S‐parameter tools
    • Resolves connector detail (<1 cm)
    • 75 μm (0.003 in.) cursor resolution
    • 16‐bit digital sampling at up to 250 KSPS
    • Stores thousands of TDR traces
    • USB host/client, 10/100 Ethernet
    • Lightweight, bright color screen
    • Internet streaming and remote control

     

    Learn More
  • Regatron Advanced testing
    Regatron Advanced testing
    Quick View
    Regatron AG Regatron Advanced testing according to EMC standards with REGATRON’s series TC.ACS
    • compact and completely modular design
    • high effectiveness in all operation modes, few requirements on building infrastructure
    • ability to use an existing liquid cooling system directly
    • optional matched liquid-to-air cooling unit TC.LAE available
    • possibility of upgrading to systems of up to 1 MVA
    • high level of system dynamics, ≤ 5 kHz modulation bandwidth
    • non-restrictive capability of refeeding in the Q4 operation mode
    • possibility of operating as an autonomous 4-Q and 3-phase quasi-analogue amplifier
    • possibility of “Hardware-in-the loop”-operation (HIL mode)
    • user friendly application software with pre-configured test patterns
    • possibility of integrating into a complete SAS simulation and test system
    • galvanic isolation available as an option without derating the simulator port data

     

    Learn More
  •
    Quick View

    CT100 Series High -Resolution Metallic TDR Cable Testers

    Next-gen Time-Domain Reflectometers replace the Tektronix® 1502C

    The new CT100 and CT100HF are the industry’s highest-resolution portable metallic TDRs, designed for testing all coaxial and twisted-pair cables and interconnects used in modern microwave/RF and digital systems. These are the only portable instruments that exceed all TDR specifications of the Tektronix® 1502C Metallic TDR Cable Tester, while providing next-generation improvements in TDR analysis, data storage, connectivity, and ergonomics.

    CT100 Series TDRs feature 8-10x sharper spatial resolution and100-1000x better Distance-to-Fault (DTF) resolution than competing TDR instruments, and have multi-GHz bandwidth similar to competing FDR (Frequency-Domain Reflectometer) instruments with similar or better cable fault sensitivity andorders-of-magnitude better DTF precision.

    These instruments’ unique combination of fast system rise-time,high-resolution time-base, and precision 16-bit impedance measurements allow you to identify and correct subtle changes in cable and connector performance before system failure. Some of the CT100 Series’ innovative features are described below. Also, please read CT100 Series Features for more information.

     

    Learn More