PRODUCTS
TMetrix carries the following test and measurement products:
SERVICES
Explore our range of technical support and calibration services:
1 800 665 7301 | info@tmetrix.com

About Us | Events | Support | Resource Centre | Line Card | News | Blog | Contact Us

Products

  • CHEMICAL IMPEDANCE ANALYZER IM3590
    CHEMICAL IMPEDANCE ANALYZER IM3590 - 2
    Quick View
    HIOKI E E CORPORATION CHEMICAL IMPEDANCE ANALYZER IM3590

    A high-performance analyzer designed for R&D applications involving electrochemical components, materials, batteries, and EDLCs. It enables precise impedance measurements essential for advanced evaluation and development.

    Key Features:

    • Wide frequency range: 1 mHz to 200 kHz for detailed ion and solution behavior analysis
    • Dual function: High-speed continuous LCR and sweep measurements with one device
    • Battery analysis: Measures internal impedance under no-load conditions
    • Ultra-fast sweep: Perform measurements in as little as 2 ms
    • High accuracy: ±0.05% basic precision for reliable R&D and testing
    • Advanced analysis: Supports Cole-Cole plots and equivalent-circuit modeling for electrochemical studies
    Learn More
  • EQUIVALENT CIRCUIT ANALYSIS FIRMWARE IM9000
    EQUIVALENT CIRCUIT ANALYSIS FIRMWARE IM9000
    Quick View
    HIOKI E E CORPORATION EQUIVALENT CIRCUIT ANALYSIS FIRMWARE IM9000

    An advanced firmware upgrade for the IM3570 that enables quick and accurate equivalent circuit analysis, ideal for in-depth component evaluation and quality control.

    Key Features:

    • Automatically selects the optimal equivalent circuit model from five typical options
    • Minimizes discrepancies between measured and ideal frequency characteristics
    • Determines acceptance/rejection of L, C, and R elements with precision
    • Evaluates resonance sharpness (mechanical quality coefficient)
    • Enables detailed analysis of piezoelectric elements and inductors through resonance
    Learn More
  • IMPEDANCE ANALYZER IM3570
    IMPEDANCE ANALYZER IM3570
    Quick View
    HIOKI E E CORPORATION IMPEDANCE ANALYZER IM3570

    A high-speed, high-precision LCR meter ideal for low-ESR and impedance testing in advanced electronic components like polymer capacitors, inductors, and piezoelectric elements.

    Key Features:

    • Continuous LCR/DCR/sweep measurements with one instrument
    • Ultra-fast testing speeds: 1.5 ms (1 kHz), 0.5 ms (100 kHz)
    • High accuracy: ±0.08% basic accuracy for Z parameter
    • Ideal for low-ESR measurement of functional polymer capacitors
    • Suitable for resonance testing of piezoelectric elements
    • Accurate DCR and L-Q testing of inductors, coils, and transformers
    Learn More
  • IMPEDANCE ANALYZER IM7580A
    IMPEDANCE ANALYZER IM7580A - 2
    Quick View
    HIOKI E E CORPORATION IMPEDANCE ANALYZER IM7580A

    The Hioki IM7580A is a compact, high-speed impedance analyzer for 1 MHz to 300 MHz testing, ideal for both production and R&D. It works seamlessly with the IM9201 SMD fixture for reliable component testing.

    Key Features:

    • 1 MHz to 300 MHz frequency range
    • 0.5 ms test speed
    • ±0.72% basic accuracy
    • Compact half-rack size with palm-sized test head
    • Reliable contact check functions
    • Frequency, level, and time sweeps in Analyzer Mode
    • RF I-V method for precise measurement
    Learn More
  • IMPEDANCE ANALYZER IM7581
    IMPEDANCE ANALYZER IM7581 - 2
    Quick View
    HIOKI E E CORPORATION IMPEDANCE ANALYZER IM7581

    The Hioki IM7581 is a compact, high-speed impedance analyzer designed for accurate testing from 100 kHz to 300 MHz. It’s ideal for both production and development environments.

    Key Features:

    • 100 kHz to 300 MHz frequency range
    • 0.5 ms fastest test speed
    • ±0.72% basic accuracy
    • Compact half-rack size, palm-sized test head
    • Reliable contact check via DCR, Hi-Z reject, or waveform judgment
    • Supports frequency, level, and time sweeps in Analyzer Mode
    • Uses RF I-V method for precise measurement
    Learn More
  • Impedance Analyzer IM7587 3 GHz
    Impedance Analyzer IM7587 3 GHz
    Quick View
    HIOKI E E CORPORATION IMPEDANCE ANALYZER IM7587 3 GHz

    The Hioki Impedance Analyzer IM7587 3 GHz provides precision, speed, and versatility for impedance measurements from 1 MHz to 3 GHz, ideal for both R&D and mass production applications in electronic component testing.

    Key Features:

    • Frequency range: 1 MHz to 3 GHz
    • Test speed: 0.5 ms
    • Measurement variability: 0.07%
    • Basic accuracy: ±0.65% reading
    • RF I-V measurement technique
    • Compact half-rack design with palm-sized test head
    • Robust contact check capabilities
    • Analyzer mode: frequency and level sweeps, time interval measurements
    Learn More
  • AE Techron 7234
    AE Techron 7234
    Quick View
    AE Techron AE Techron 7234 : Up to 50 Ap/158 Vp, DC to 250 kHz, Single-Phase

    Single-phase, 2U, industrial amplifier/battery simulator

    • Bench-sized
    • Powered from 120V/230VAC
    • Source and Sink (4 quadrant)
    • Rugged Design
    • 3-Year, No-Fault Warranty

    Key Performance Capabilities:

    • Drop outs and surges as fast as 1.2µs
    • Small signal response up to 1 MHz
    • 13.5 VDC at up to 28A
    • Field-selectable ±40V, 75V or 150V potential

     

    Learn More
  • Tabor Model 9100
    Tabor Model 9100
    Quick View
    Tabor Electronics Ltd. Tabor Model 9100 – 300Vp-p Single-Channel Signal Amplifier
    • High voltage output to 300Vp-p (±150V)
    • Output current to 150 mA
    • Full power bandwidth from DC to >500kHz
    • Slew rate to 200V/µs
    • Low distortion
    • Low cost
    • Custom Configuration of gain and signal Ground

     

    Learn More
  • Tabor Model 9100A
    Tabor Model 9100A
    Quick View
    Tabor Electronics Ltd. Tabor Model 9100A – 400Vp-p Single-Channel Signal Amplifier
    • Single channel
    • High voltage output to 400Vp-p (±200V)
    • Output current to 125 mA
    • Full power bandwidth from DC to >500kHz
    • Slew rate to 400V/µs
    • Monitor Output
    • Precise signal amplification for multiple applications
    • Compatible with any of the Tabor waveform generators

     

    Learn More
  • Tabor Model 9200
    Tabor Model 9200
    Quick View
    Tabor Electronics Ltd. Tabor Model 9200 – 300Vp-p Dual-Channel Signal Amplifier
    • High voltage output to 300Vp-p (±150V)
    • Output current to 100 mA per channel
    • Full power bandwidth from DC to >500kHz
    • Slew rate to 200V/µs
    • Low distortion
    • Low cost
    • Custom Configuration of: Gain, Signal Ground

     

    Learn More
  • Vitrek 4700 Precision High Voltage Meter
    Vitrek 4700 Precision High Voltage Meter
    Quick View
    Vitrek Corporation Vitrek 4700 Precision High Voltage Meter
    • Dual inputs allows Differential or Phaseto-Phase voltage measurement
    • High speed DSP provides up to 60 filtered readings per second
    • True RMS AC measurement from 0.01Hz to 600Hz—covering VLF to aviation frequencies
    • AC noise rejection 78dB—for rock solid, six digit DC Measurements
    • Optional battery pack goes up to 11 hours between charges
    • G Series—high input impedance probes for electrostatic applications
    • CE mark Certified to EN61010
    • Available ISO 17025 accredited calibration
    • Three year extended warranty (one year standard warranty)

     

    Learn More
  • Vitrek 4700 Precision
    Vitrek 4700 Precision
    Quick View
    Vitrek Corporation Vitrek 4700 Precision High Voltage Meter
    • The S type Channel card provides economical, high-performance power measurement with a basic 0.1% accuracy and enough bandwidth to handle waveforms up to 1.25 MHz.
    • The A-type ultra-precision Channel card offers a 2-year accuracy rating of 0.03% of reading and bandwidth up to 1.25 MHz.
    • The W type Wideband Channel card performs precision power measurements on the toughest real-world waveforms, with sampling speed fast enough to tame waveforms up to 5Mhz

     

    Learn More
  • Vitrek 95X Series Hipot Testers
    Vitrek 95X Series Hipot Testers
    Quick View
    Vitrek Corporation Vitrek 95X Series Hipot Testers
    • The S type Channel card provides economical, high-performance power measurement with a basic 0.1% accuracy and enough bandwidth to handle waveforms up to 1.25 MHz.
    • The A-type ultra-precision Channel card offers a 2-year accuracy rating of 0.03% of reading and bandwidth up to 1.25 MHz.
    • The W type Wideband Channel card performs precision power measurements on the toughest real-world waveforms, with sampling speed fast enough to tame waveforms up to 5Mhz

     

    Learn More
  • Vitrek V7X Series Hipot Testers
    Vitrek V7X Series Hipot Testers
    Quick View
    Vitrek Corporation Vitrek V7X Series Hipot Testers
    • 3″ Color Touch Display – Easy To Use Intuitive User Interface
    • 6 Functions Choose From – AC/DC Hipot, IR, Ground Bond, Continuity & Built-in Switching
    • Made in the USA – Designed & Built in San Diego CA
    • Compact, Lightweight, Rugged, Fan Free, Fast (100mS min test time) & Accurate
    • 5KV AC/DC Hipot, 20mA max source current
    • Ground Bond 1-30A RMS (42 A peak), 100µΩ Resolution
    • 100 nano-Amp Leakage Current Resolution
    • Low Cost of Ownership – 2 Year Calibration Interval

     

    Learn More
  • AE Techron 8500 Series
    AE Techron 8500 Series
    Quick View
    AE Techron AE Techron 8500 Series : 4 kW to 20 kW (up to 125 kVA), up to 500A continuous, single-phase and three-phase

    Key Performance Capabilities:

    • Bandwidth: DC to 50 kHz
    • Voltage: 0 to 250 VRMS; 0 to 350 VDC
    • Current: 100 to 500 ARMS
    • Distortion: 0.1%
    • Power: 4 kW to 20 kW*Power levels up to 5X rated power when driving reactive loads
    • High power efficiency and density

    *Models available with output from 4 kW to 20 kW (capable of up to 125 kVA).

     

    Learn More
  • Hioki AC Grounding HiTester 3157
    Hioki AC Grounding HiTester 3157
    Quick View

    Hioki AC Grounding HiTester 3157 USD $ 3,298.14
    • Compliant with a multitude of standards
    • Constant-current testing (max. 31.0 A) with feedback control
    • [ SOFT START ] function
    • Fluorescent tube display (VFD)
    • Test data count function
    • Setting value store function
    • Light weight and compact dimensions

     

    Learn More