Products

Teledyne Test Tools Digital Power Meters provide reliable, high-precision AC and DC power measurements in a compact design. Ideal for R&D, QA, and compliance testing.

Key Features:

• Bandwidth: DC, 0.1 Hz to 100 kHz
• High-resolution 4″ and 5″ TFT LCD displays
• 19 power measurement parameters
• 16-bit ADC and 300 kHz sampling rate (T3PM1100)
• Waveform, harmonic, and integration functions
• External current sensor input (T3PM1100)
• Supports IEC 62301 and IEC 61000-4-7 standards
• Interfaces: USB, LAN, RS-232C
• Front/rear terminal inputs for flexible testing

The Teledyne T3SA Series Spectrum Analyzers deliver high-performance signal analysis from 9 kHz to 3.2 GHz in a compact, easy-to-use design. Ideal for R&D, education, production, and pre-compliance testing, it features a large touchscreen and advanced digital IF technology.

Key Features:

• All Digital IF technology10.1”
• WVGA (1024 x 600) touchscreen display
• Frequency range from 9 kHz to 3.2 GHz
• -161 dBm/Hz displayed average noise level (typical)
• -98 dBc/Hz @ 10 kHz offset phase noise (typical)
• Total amplitude accuracy < 0.7 dB
• 1 Hz minimum resolution bandwidth (RBW)
• Built-in preamplifier for improved sensitivity

Typical Applications

● Research Laboratory
● Development Laboratory
● Repair and Maintenance
● Calibration Laboratory
● Automatic Production Test
● General bench-top use

Single Phase Power Meter Compatible with DC Measurement and Current/Power Integration Measurement

Key Features:

• Compatible with the SPECpower® (*1) benchmarking for server power consumption
• DC measurement mode, AC, and AC+DC measurement
• Integration function for current and power
• ±0.1% high basic accuracy (*2) For complete details, please refer to the specifications)
• Extended period of guaranteed accuracy of 3 years
• Complete accuracy over a wide input range

Single-phase, 2U, industrial amplifier/battery simulator

• Bench-sized
• Powered from 120V/230VAC
• Source and Sink (4 quadrant)
• Rugged Design
• 3-Year, No-Fault Warranty

Key Performance Capabilities:

• Drop outs and surges as fast as 1.2µs
• Small signal response up to 1 MHz
• 13.5 VDC at up to 28A
• Field-selectable ±40V, 75V or 150V potential

Single Phase Power Meter for Production and Inspection Lines

Key Features of HiTESTER 3333 Single-Phase Power Meter:

• Ideal for replacing portable instruments, ±0.1% basic accuracy
• Extended period of guaranteed accuracy of 3 years
• 50mA to 20A AC current range (300 V Max., Accuracy guaranteed up to 30 A)
• Print out with the 9442 and RS-232C interface

• High voltage output to 300Vp-p (±150V)
• Output current to 150 mA
• Full power bandwidth from DC to >500kHz
• Slew rate to 200V/µs
• Low distortion
• Low cost
• Custom Configuration of gain and signal Ground

• Single channel
• High voltage output to 400Vp-p (±200V)
• Output current to 125 mA
• Full power bandwidth from DC to >500kHz
• Slew rate to 400V/µs
• Monitor Output
• Precise signal amplification for multiple applications
• Compatible with any of the Tabor waveform generators

• High voltage output to 300Vp-p (±150V)
• Output current to 100 mA per channel
• Full power bandwidth from DC to >500kHz
• Slew rate to 200V/µs
• Low distortion
• Low cost
• Custom Configuration of: Gain, Signal Ground

3-Channel AC/DC Power Meter for Single-Phase to 3P4W Equipment such as Motors, Inverters, Power Conditioners, and Power Supplies

• Voltage/current/power basic accuracy of ±0.1% *
• Direct input up to 1000 V AC/DC / 65 A
• Harmonic measurement as standard feature, IEC61000-4-7 compliant
• Little instrument loss, even with large currents. DCCT input with an input resistance of 1 mΩ or less.
• Power factor effect of ±0.1% f.s. delivers highly accurate measurements even for no-load testing of transformers with a low power factor
• Measurement of multiple connections in the optimal range for each due to independent ranges for each channel
• Measure up to 5000 A AC with optional current sensor

Key Performance Capabilities:

• Bandwidth: DC to 50 kHz
• Voltage: 0 to 250 V_RMS; 0 to 350 VDC
• Current: 100 to 500 A_RMS
• Distortion: 0.1%
• Power: 4 kW to 20 kW*Power levels up to 5X rated power when driving reactive loads
• High power efficiency and density

*Models available with output from 4 kW to 20 kW (capable of up to 125 kVA).

3-Channel AC/DC Power Meter for Single-Phase to 3P4W Equipment such as Motors, Inverters, Power Conditioners, and Power Supplies.

XJDeveloper is a graphical application that allows you to quickly and easily set up and run tests on your circuit. With XJDeveloper you can reduce your time to market by reusing your test scripts all the way through the product design process and then in manufacturing.