PRODUCTS
TMetrix carries the following test and measurement products:
SERVICES
Explore our range of technical support and calibration services:
1 800 665 7301 | [email protected]

About Us | Events | Support | Resource Centre | Line Card | News | Blog | Careers | Contact Us

Products

Showing 1–16 of 24 results

  • 3506-10 C Meter - 01
    3506-10 C Meter - 03
    Quick View
    HIOKI E E CORPORATION 3506-10 C Meter

    The Hioki 3506-10 C Meter is a high-speed dual-band capacitance meter designed specifically for ceramic capacitor testing on automated production lines. Built for seamless integration with taping machines and sorting systems, it delivers fast, stable, and repeatable measurements even in demanding manufacturing environments.

    Key Features

    • Dual measurement frequencies of 1 kHz and 1 MHz
    • Ultra-fast analog test time of 0.6 ms at 1 MHz
    • Stable low-capacitance measurement for MLCC production
    • Enhanced noise resistance for reliable inline testing
    • BIN function for efficient component screening
    • Designed for integration with taping machines and sorters
    • Excellent repeatability for high-volume manufacturing

     

    Learn More
  • MEMORY HiCORDER MR6000
    Quick View
    HIOKI E E CORPORATION MEMORY HiCORDER MR6000 USD $ 15,210.78

    The Hioki MR6000 Memory HiCorder sets a new benchmark in waveform recording, combining cutting-edge technology, intuitive design, and world-class performance. Built from the ground up, it’s engineered to tackle both current and future measurement challenges with ease and precision.

    Key Features:

    • Large, intuitive touch panel for efficient and user-friendly operation
    • Simultaneous multi-channel isolation measurement at up to 200 MS/s (with High Speed Analog Unit U8976)
    • Significantly faster data saving for a seamless experience
    • Real-time data saving without interrupting ongoing measurements
    Learn More
  • MEMORY HiCORDER MR8741 - 1
    Quick View
    HIOKI E E CORPORATION MEMORY HiCORDER MR8741 USD $ 6,710.59

    The Hioki Rack-mounted Multi-channel System Recorder (MR8741/MR8740) is a powerful, high-speed, single-device solution for waveform recording and generation. Ideal for test systems, it offers high-resolution, isolated multi-channel measurements with fast sampling capabilities.

    Key Features:

    • Integrated waveform recording and generation in one device
    • Equipped with DVM Unit MR8990 for high-accuracy 24-bit resolution measurements
    • Supports up to 16 channels (MR8741) for multi-channel testing
    • Isolated input between channels and from input to chassis (up to 300 V AC/DC)
    • High-speed sampling up to 20 MS/s
    • Compact rack-mountable design (4U height, under 180 mm depth)
    • Monitor display and setting access via DVI-D and mouse
    • Enables remote measurement and control via LAN
    • Browser-based screen monitoring or advanced control via Hioki 9333 LAN Communicator
    Learn More
  • MEMORY HiCORDER MR8827 - 1
    MEMORY HiCORDER MR8827 - 2
    Quick View
    HIOKI E E CORPORATION MEMORY HiCORDER MR8827 USD $ 11,073.17

    The Hioki Memory Recorder is a high-speed, fully-isolated data acquisition system designed for precise and simultaneous measurement of multiple analog and logic signals. Ideal for testing, simulation, and system diagnostics, it combines waveform generation and recording in one powerful unit.

    Key Features:

    • Generate and record waveforms using a single device
    • Simulate issues by outputting previously recorded problematic waveforms to test devices
    • Supports 32 analog + 32 logic channels, expandable to 28 analog + 64 logic channels
    • High-speed sampling up to 20 MS/s with fully isolated inputs
    • Ensures safe measurement with complete analog input isolation
    • Equipped with a large-capacity 512M-word memory
    • Simultaneously measures high voltage and ultra-low voltage system signals

     

    Learn More
  • Memory HiCorder MR8848 - 01
    Quick View
    HIOKI E E CORPORATION Memory HiCorder MR8848

    The Memory HiCorder MR8848 is a rugged, high-speed data acquisition recorder designed for capturing critical transient events in demanding industrial and infrastructure environments.

    Key Features

    • Durable, shock-resistant portable design for field use
    • Isolated analog channels for safe multi-system measurements
    • 32 analog and 64 logic channels for complex signal analysis
    • High-speed sampling to capture fast transient waveforms
    • Large-capacity memory for long-duration recording
    • Built-in waveform and numerical analysis for pass or fail judgments
    • Optional on-site printer for secure, tamper-proof documentation

     

    Learn More
  • Memory HiCorder MR8870 - 01
    Memory HiCorder MR8870 - 03
    Quick View
    HIOKI E E CORPORATION Memory HiCorder MR8870

    The Memory HiCorder MR8870 is a compact, high-speed data acquisition recorder designed for waveform observation and RMS variation recording in maintenance and fault analysis applications.

    Key Features

    • Dual recording mode for instantaneous waveforms and RMS variations
    • Two isolated analog channels with 2 MW internal memory
    • Real-time saving of measured values to CF card
    • Synchronize two instruments to record four channels at once
    • High-speed performance up to 1 MS per second
    • Compact handheld design for easy field transport
    • Sharp QVGA TFT wide LCD for clear waveform viewing
    • Ideal for elevator, motor, inverter, and machine diagnostics

     

    Learn More
  • Memory-HiCorder-MR8875-05
    Quick View
    HIOKI E E CORPORATION Memory HiCorder MR8875

    The Memory HiCorder MR8875 is a high-speed, portable data acquisition recorder designed for vehicle testing, performance evaluation, and advanced multichannel measurements.

    Key Features

    • 1000 V direct input with instantaneous DC and RMS measurement
    • Up to 16 to 60 channels with plug-and-play input modules
    • High-speed simultaneous logging down to 2 microseconds
    • Real-time recording directly to SD card for long-term logging
    • 16-bit high-resolution measurement for accurate results
    • Direct CAN bus input for onboard vehicle analysis
    • Built-in FFT and waveform calculation for advanced analysis
    • Intuitive touch screen interface for fast setup and operation
    • Designed to withstand vibration and extreme temperatures

     

    Learn More
  • Memory HiCorder MR8880
    Memory HiCorder MR8880
    Quick View
    HIOKI E E CORPORATION Memory HiCorder MR8880

    The Memory HiCorder MR8880 is a rugged, field-ready waveform recorder designed to capture high- and low-voltage signals safely in industrial and maintenance applications.

    Key Features

    • Direct 600 V input for three-phase power measurements
    • CAT III 600 V isolation for safe high-voltage testing
    • Four completely isolated analog channels
    • Simultaneous recording of three-phase systems plus one spare channel
    • Wide operating temperature range from minus 10 to 50 degrees Celsius
    • Shock- and vibration-resistant housing with side protectors
    • Built-in trigger and pre-trigger functions for precise event capture
    • Presets function for fast and consistent setup

     

    Learn More
  • Pulse Generator MR8791 -01
    Quick View
    HIOKI E E CORPORATION Pulse Generator MR8791

    The Pulse Generator MR8791 is a plug-and-play input module for Hioki Memory HiCorders, designed for precise control simulation testing of electronic control systems.

    Key Features

    • Outputs pulse and pattern waveforms on up to eight channels
    • Supports TTL level and open-collector output signals
    • Designed for control simulation testing of ECUs and control boards
    • Suitable for engine, airbag, brake, and power steering systems
    • Wide frequency range for pulse and logic pattern generation
    • Built-in self-test function for reliable operation
    • Isolated design between unit and output channels
    • Compact form factor for laboratory and test bench integration

     

    Learn More
  • PXI-XJLink2 JTAG Controller
    PXI-XJLink2 JTAG Controller
    Quick View
    XJTAG PXI-XJLink2 JTAG Controller

    Key Features:

    • PXI/cPCI JTAG controller for seamless integration into PXI-based test systems
    • Supports up to 4 JTAG chains on a Unit Under Test (UUT)
    • Configurable I/O pin-out for maximum flexibility across projects
    • Fully compatible with other XJLink2 controllers
    • TCK clock speeds up to 166 MHz
    • Programmable voltage domains from 1.1 V to 3.3 V in 0.1 V steps
    • Built-in voltage meter and frequency counter on all I/O pins
    • Adjustable signal termination with auto-skew control
    • Includes LabVIEW™ Virtual Instruments (VIs) for easy integration
    • Self-contained licence for use on multiple PXI racks or servers

     

    Learn More
  • VIR Generator U8794
    VIR Generator U8794
    Quick View
    HIOKI E E CORPORATION VIR Generator U8794

    The VIR Generator U8794 is a high-precision signal generation unit designed to simulate sensor outputs for ECU inspection, component testing, and maintenance applications.

    Key Features

    • Generates DC voltage, DC current, and resistance simulation signals
    • Ideal for ECU inspection, electronic component testing, and equipment maintenance
    • Eight fully isolated output channels for safe multi-signal simulation
    • High-accuracy resistance simulation with automatic current calculation
    • Designed exclusively for use with Memory HiCorder MR8740 series
    • Supports sensor simulation testing without physical sensors
    • Compact and lightweight design for bench and field environments

     

    Learn More
  • Waveform Generator U8793
    Waveform Generator U8793
    Quick View
    HIOKI E E CORPORATION Waveform Generator U8793

    The Waveform Generator U8793 is a plug-and-play module for Hioki Memory HiCorders that enables arbitrary waveform output and anomaly simulation for advanced testing scenarios.

    Key Features

    • Outputs arbitrary waveform signals on up to two channels
    • Reproduces waveforms recorded with a Memory HiCorder up to 15 V
    • Generates customized arbitrary waveforms up to 15 V output
    • Built-in function generator and sweep function
    • Isolated design between unit and outputs and between channels
    • Supports anomaly simulation and scenario-based testing
    • Includes Waveform Maker software for easy waveform creation
    • Designed for use with compatible Hioki Memory HiCorder models

     

    Learn More
  • XJLink-PF40 JTAG Controller
    XJLink-PF40 JTAG Controller
    Quick View
    XJTAG XJLink-PF40 JTAG Controller

    Key Features:

    • Portable USB-C to JTAG controller with 40 I/O pins
    • Supports up to 8 separate JTAG TAP chains with independent frequencies
    • Compact and rugged aluminium casing for lab, production, or field use
    • Configurable JTAG pin-out to suit any Unit Under Test (UUT)
    • Electrical protection against –30 V to +30 V input
    • Four programmable I/O voltages (1.2 V to 3.3 V, in 0.1 V steps)
    • Built-in voltmeter and frequency counter on all pins
    • High-speed operation with TCK up to 166 MHz
    • USB bus-powered with locking Type-C connector
    • Self-contained licence for maximum flexibility

     

    Learn More
  • XJLink2 JTAG Controller
    XJLink2 JTAG Controller
    Quick View
    XJTAG XJLink2 JTAG Controller

    Key Features:

    • Compact USB JTAG controller for flexible board testing
    • Supports up to 4 JTAG chains per UUT
    • Lightweight, portable, and ideal for lab, production, or field use
    • Configurable pin-out for easy adaptation to any PCB design
    • High-speed TCK clock up to 166 MHz
    • Two programmable voltages from 1.1 V to 3.3 V in 0.1 V steps
    • Built-in voltmeter and frequency counter on all I/O pins
    • +5 V tolerant signals with auto-skew control
    • USB bus-powered, no external PSU needed
    • Self-contained licence, usable on multiple PCs

     

    Learn More
  • XJLink2-3070 JTAG Controller
    XJLink2-3070 JTAG Controller
    Quick View
    XJTAG XJLink2-3070 JTAG Controller

    Key Features

    • Approved by Keysight Technologies for i3070 ICT integration
    • Fully compatible with all XJTAG projects
    • High-speed programming with TCK up to 166 MHz
    • Supports up to 4 JTAG chain connections to UUT
    • Configurable interface voltages (1.1 V to 3.3 V)
    • Adjustable signal slew rate and drive strength
    • Automatic signal skew control for maximum reliability
    • Frequency counter on all I/O pins (up to 200 MHz input)
    • Fits into one i3070 utility card slot (multiple units supported)
    • Enables test + programming in a single stage to boost throughput
    • Supports additional protocols including I²C, SPI, and vendor-specific interfaces
    • Flexible software licensing options for stand-alone or network operation

     

    Learn More
  • XJQuad Multiport JTAG Controller
    XJQuad Multiport JTAG Controller
    Quick View
    XJTAG XJQuad Multiport JTAG Controller

    Key Features:

    • 4-port JTAG tester for simultaneous testing of up to 4 boards
    • High-speed USB 2.0 interface with robust performance
    • Supports up to 4 TAP chains per UUT
    • Configurable JTAG pin-out for simplified connectivity
    • Parallel or independent testing on each port
    • Programmable voltages from 1.1 V to 3.3 V in 0.1 V steps
    • Built-in voltmeter and frequency counter on all I/O pins
    • Automatic signal skew control for reliable operation
    • Self-contained licence for use across multiple PCs
    • Ideal for production lines and PCB manufacturers

     

    Learn More

Showing 1–16 of 24 results