1 800 665 7301 | info@tmetrix.com

    • 3″ Color Touch Display – Easy To Use Intuitive User Interface
    • 6 Functions Choose From – AC/DC Hipot, IR, Ground Bond, Continuity & Built-in Switching
    • Made in the USA – Designed & Built in San Diego CA
    • Compact, Lightweight, Rugged, Fan Free, Fast (100mS min test time) & Accurate
    • 5KV AC/DC Hipot, 20mA max source current
    • Ground Bond 1-30A RMS (42 A peak), 100µΩ Resolution
    • 100 nano-Amp Leakage Current Resolution
    • Low Cost of Ownership – 2 Year Calibration Interval

     

  • Key Performance Capabilities:

    • Slew rates up to 60 V/µsec.
    • Up to 240A DC at +50VDC or –50VDC (4301-240 configuration).
    • Can provide pulses of up to 800 amps at voltages of up to ±100V (4301-240 configuration).
    • Adjustable compensation allows the system to maintain a 50V/2 µsec rise-time over a wide range of current outputs.

     

  • Key Performance Capabilities:

    • 4-Quadrant – Can source and sink current
    • ±80V – DC supply for 12V to 48V systems; meets 80V surge requirements
    • 300 kHz Sine – DC ripple tests for all major standards
    • 3µs Rise Time – Exceeds surge and dropout slew rate requirements
    • 3mΩ DC Source Impedance – Out-performs ISO 7637-2 requirements
    • Supports ground reference and supply offset testing required for ISO 16750-2 Sect. 4.8 and other similar standards

     

    • Frequency Range 10 Hz – 1GHz, 3GHz or 6GHz
    • 4000x faster in your pre-certifcation work
    • compact design and +12V power supply
    • 162.5 MHz full gapless real-time analysis bandwidth
    • Weighted Real-time Spectrogram

     

    • requency Range from DC up to 40 GHz
    • 685 MHz Real-time analysis bandwidth
    • Dynamic range of more than 100 dB
    • Multi-GHz real-time scanning up to 40 GHz
    • all 6dB RBWs acc. to CISPR, MIL, DO, ANSI, FCC
    • fastest super-heterodyn receiver on the planet

     

    • Compliant with a multitude of standards
    • Constant-current testing (max. 31.0 A) with feedback control
    • [ SOFT START ] function
    • Fluorescent tube display (VFD)
    • Test data count function
    • Setting value store function
    • Light weight and compact dimensions

     

    • Uninterrupted polarity switching function
    • Safety conductor current measurement function
    • Automatic measurement functionality
    • 110% voltage application jack
    • Circuit breaker for device under measurement
    • Save measurement data for 100 devices
    • Improved test reliability
    • Simple, interactive operation
    • Ability to store up to 30 sets of measurement conditions

     

    • 5-range testing voltage of 50 V/100 MΩ to 1000 V/4000 MΩ
    • Stable & medium-speed digital readings, 0.8 second response time of PASS/ FAIL decisions
    • Drop proof onto concrete from 1m (3.28 feet)
    • Bright LED, luminous LCD, test lead with bright LED lamp to illuminate near hand (Also available in the IR4056-21)
    • Continuity check via 200 mA testing
    • Built in AC/DC voltage meter, useful for testing solar power generation systems and electric vehicles

    Guarantee3years  CEDROPPROOF

    • Top “primary supply level” safety class rating for voltage detectors
    • CAT IV 1000 V design meets CE Mark qualifications
    • Continuously indicate battery status with green indicator lamp
    • Both visual and audible voltage detection indication
    • Automatic power switching prevents battery discharge

    Guarantee3years  CE

    • Dynamic set up: During a simple frame reading, users can define elements to be acquired, recorded, visualized and surveyed in real time.
    •  Macro-command: Users can write and execute complex test sequences thanks to macro-command functions.
    •  Local & Distant Integration: AT-DIAG can be driven and interrogated by external software. It can also be used with a computer through Ethernet.
    • Communication ports: Communication is done through RS232, NI CAN acq. Card, specific acquisition card or system.
    •  Protocols: FREERUNNING, KWP2000, CAN, LIN, FlexRay, ARINC, … Possibility to implement new protocols (customized protocol, …).
    •  Multi-product & Multi-protocol Communication: Communication can be set up with multiple addresses and protocols during a single test.

     

    • 1 software for all your equipment
    • 1 software for all standards
    • 1 software for your electrical and EMC tests
    • Advanced functions of monitoring and control
    • Automated reports
    • Team of specialists at your disposal

     

    • Fast: ACA compression and parallelization allow to speed up the calculation
    • Accurate: Fully validated with measurement results on real mock-up
    • Innovative: New method from research labs
    • Powerful: Compute very large models
    • Easy: Dedicated graphical user interface with modern layout

     

    • Fast: ACA compression and parallelization allow to speed up the calculation
    • Accurate: Fully validated with measurement results on real mock-up
    • Innovative: New method from research labs
    • Powerful: Compute very large models
    • Easy: Dedicated graphical user interface with modern layout

     

    • Unique user interface for all tests
    • Independent from any measuring device manufacturers
    • Free drivers and over 500 supported devices
    • Efficient and dedicated Technical support
    • Wide range of supported standards (ENxx, CISPR, AUTOMOTIVE, DO160, …)
    • Interface Agilent VEE™, WindowsLabView™, LabWindows CVI™, Visual C++
    • Operating system: Win XP, Vista, Seven, Windows 8
    • Report in MS Office™ 2003, 2007, 2010, 2013, Open office

     

    • Highest Range of IR Test Voltage
    • Fast IR Readings
    • High Resistance Measurement Range
    • Expansive Test Sequence Memory
    • Multi-Dwell Functionality
    • Ethernet, RS232, Digital I/O, & Scanner Control
    • Pico-Amp Leakage Measurement
    • Test Specific Fixture & Cable
    • Measure IR on Grounded Loads
    • Continuously Variable IR Test Voltage
    • Multi-Mode IR
    • Light Weight Design

     

  • Single-Range 1000V/2000MΩ Analog Insulation Tester

    Analog Insulation Tester, Megohmmeter | IR4018-20

    • Single range: 1000V/2000MΩ
    • AC voltage testing