Products

High-performance dual-channel function and arbitrary waveform generator with up to 240 MHz output for advanced test and signal needs.

Key Features:

• Frequency range from 40 MHz to 240 MHz
• Dual independent or coupled full-performance channels
• Precise phase control: 0.001° resolution
• Arbitrary waveform support up to 800 MS/s
• Replay rates up to 80 MHz
• Wide range of built-in and user-defined waveforms
• Pulse generation up to 100 MHz, low jitter
• Internal/external modulation, sweep, gated, and burst modes
• USB, LAN (LXI compliant), and optional GPIB
• PC software for waveform generation and editing

Key Features:

• Single output up to 360W: Choose between 18V/20A or 35V/10A
• Mixed-mode regulation for high accuracy and low noise
• Fanless convection cooling for completely silent operation
• Bench or rack mountable, front and rear terminals
• OVP trip, high-resolution settings, and remote sense terminals
• P models offer USB, RS232, LAN interfaces (GPIB optional)
• Rotary, keypad, and step control for voltage and current
• Non-volatile memory for storing up to 25 user presets
• Seamless integration with Test Bridge software and automation systems

• High Power: Ranging from  750W to 15kW.
• User-Friendly: Easy connections via LAN (LXI 1.5), USB (2.0), RS-232/RS-485.
• Safe & Certified: CE/UKCA marked with built-in safety.
• Versatile: Ideal for various industries.
• Warranty: 5 years.

• Optional Interfaces: IEEE, EtherCAT, Modbus-TCP, Isolated Analog 4-20mA (IS420)
• Output Power Levels: 1kW to 15kW, low-noise performance
• Output Voltage/Current: Up to 1500V and 1500A
• AC Input Options: Single-phase and three-phase with Active Power Factor Correction
• Mechanical Options: Blank Front Panel, Air Filter Kits, Parallel Kits
• Certifications: CE/UKCA Marked, UL/cUL/IEC/EN 61010-1
• Warranty: 5 years

• High power density, lightweight, and portable
• Output power: 30kW, 45kW, 60kW; Output voltages: 10V to 600V
• Advanced features: Programmable V/I Slew-Rate, Constant-Power Limit, Arbitrary Waveform Generator
• Built-in interfaces: LAN (LXI 1.5), USB (2.0), RS-232/RS-485, Isolated Analog (5V/10V)
• Optional interfaces: IEEE, EtherCAT, Modbus-TCP, Isolated Analog 4-20mA
• CE and UKCA marked, worldwide safety approvals, 5-year warranty

• Compact, air-cooled OEM style
• Superior pulse repeatability
• Simple parallel operation for higher power
• Optional Active PFC (pf = 0.98)
• Full remote control interface
• High EMI-RFI immunity

• Advanced semiconductor technology
• High-quality construction
• Rapid capacitor and pulse-forming network charging
• Compact and lightweight design
• Simple parallel operation for higher power needs
• Compatible with worldwide input voltages and frequencies
• Fully adjustable output voltage
• Comprehensive remote control interface

• High-Speed Current Control: No dynamic overshoot or oscillation
• High Slew-Rate: Up to 30A/*s for fast load changes
• Low Voltage Operation: Stable operation with no turn-on delay
• Multi-Functional: Seven load modes and four operating modes
• Parallel Operation: Up to 10kW with 10 units
• User-Friendly Interface: Built-in USB and optional IEEE interfaces
• Compliance: EN61010-1 compliant with a two-year warranty

The new G5.RSS series features

• High control dynamics
• An exceptional accuracy
• A nominal output voltage of up to 3000 VDC
• A wide current-voltage range with an auto-ranging factor of 3.
• You get the best value for your investment.

• Proven member of a modular Power Module family, more than 800 units are in service
• Precision-regulated Bi-Polar output provides up to +12 to -12 Amps for Magnet loads.
• Smooth operation through zero amps output current, no “Crossover” problems.
• All 2510 MCOR12 Power Modules are identical and interchangeable.
• Has two high-precision measurements of output current;
  • one is used to close the regulation control loop,
  • provides an independent monitoring signal to the Crate Interface Card.
• Fault sensing circuitry in the module sets a Fault Latch which inhibits the output.
• A (momentary) Sync input signal inhibits MOSFET switching when it is active (high);
  • this eliminate switching noise .
  • reduces power line noise during sensitive analog signal measurements.

• Proven member of a modular Power Module family, more than 800 units are in service
• Precision-regulated Bi-Polar output provides up to +30 to -30 Amps for Magnet loads.
• Smooth operation through zero amps output current, no “Crossover” problems.
• All 2510R30 MCOR30 Power Modules are identical and interchangeable
  • Programming Card is plugged into the replacement module.
• Each channel has a critically-damped, LC noise filter with a cut-off frequency of about 8 kHz.
• A 16-pin front panel diagnostics connector taps onto major circuit nodes which enables quick “inthe-crate” fault evaluation

• 2U Chassis – 19″ rack mount 3.48” Height, 9.60” Depth and Weight 6lb.
• Power 120V AC 60Hz
• Washable front removable air filter
• Ball Bearing AC fans provide 330 CFM
• Dual plenum design
• Cooling for 160mm,220mm depth modules
• Diverts lower warmed air to rear of Cabinet
• RM option diverts lower air to front of Cabinet

• accommodate these control schemes
• total control system interface on a single VME-standard card
• occupies the left-most slot of the crate
• monitoring voltage reference inputs, output voltages and fault conditions
• standard VMEbus-compatible 6U by 220 mm board installed
• Eurocard crate
• Two 96-pin I/O connectors

MCOR Modules

MCOR 2/6/9/12

Each module can be customized to provide maximum outputs of 2 amps, 6 amps, 9 amps, and 12 amps. Up to 16 of these can fit in a single 6U VME style crate.

MCOR 30

Each module can provide a maximum output 30 amps. Up to 8 of these can fit in a single 6U VME style crate.

• provides precision bi-polar output currents
• minimal zero-cross over distortion
• 19” rack mounted 6U x 220 mm crate
• crate has 17 slots; 16 (slot 0 thru 15)
• connectors
  • J1 (ExtIntlk),
  • J2 (CrateOK),
  • J3 (Input Reference Voltages),
  • J4 (Output Monitors), and
  • J9 (Bitbus)

• compact and completely modular design
• high effectiveness in all operation modes, few requirements on building infrastructure
• ability to use an existing liquid cooling system directly
• optional matched liquid-to-air cooling unit TC.LAE available
• possibility of upgrading to systems of up to 1 MVA
• high level of system dynamics, ≤ 5 kHz modulation bandwidth
• non-restrictive capability of refeeding in the Q4 operation mode
• possibility of operating as an autonomous 4-Q and 3-phase quasi-analogue amplifier
• possibility of “Hardware-in-the loop”-operation (HIL mode)
• user friendly application software with pre-configured test patterns
• possibility of integrating into a complete SAS simulation and test system
• galvanic isolation available as an option without derating the simulator port data