Test and Measurement Products

Quick View
CAEN ELS DAMC-FMC2ZUP Carrier
The DAMC-FMC2ZUP Carrier is a high performance FMC and FMC+ carrier board built in the MTCA.4 form factor and powered by the Xilinx Zynq UltraScale+ MPSoC XCZU11EG processor. Designed for demanding data acquisition and signal processing applications, the board combines powerful FPGA resources with an integrated ARM processing system. With dual FMC connectivity, high speed transceivers, and advanced clocking architecture, the DAMC-FMC2ZUP Carrier offers exceptional flexibility for modern instrumentation and control systems.

Key Features
- MTCA.4 FMC and FMC+ carrier board architecture
- Powered by Xilinx Zynq UltraScale+ MPSoC XCZU11EG FPGA
- 653k programmable logic cells for advanced digital processing
- 2920 DSP slices for high speed signal processing tasks
- 48 multi gigabit transceivers for high bandwidth communication
- Quad core ARM Cortex A53 processor operating at 1.5 GHz
- Dual DDR4 memory interfaces for high speed data operations
- Two FMC connectors including one FMC+ high speed interface
- PCI Express Gen 3.0 support with x8 configuration
- Gigabit Ethernet connectivity for system integration
- Flexible clock distribution system with multi channel switching
- Trigger and timing signal support for synchronization
- Front panel SFP+ interface for high speed networking
- Compatible with modern FPGA development environments
Learn More
Quick View
CAEN ELS EASY-DRIVER Power Supply
The EASY-DRIVER Power Supply is a compact digital bipolar power supply series designed for precise current control and flexible integration in laboratory and industrial environments. Delivering up to 200 W output power, this highly configurable unit combines advanced digital control with reliable Ethernet connectivity for seamless monitoring and operation. With multiple output configurations and low noise performance, the EASY-DRIVER Power Supply provides a cost effective and high performance solution for powering sensitive electronic loads.

Key Features
- Compact bipolar digital power supply with output power up to 200 W
- Multiple output ratings including ±1 A at ±12 V, ±2 A at ±20 V, ±5 A at ±20 V and ±10 A at ±20 V
- Digital current control loop for precise and stable operation
- Low noise and high bandwidth output performance
- Ethernet connectivity with TCP IP and UDP communication
- Multi DSP architecture for reliable digital signal processing
- Local display for output current and voltage monitoring
- LED indicators for real time system status
- Built in protections including over voltage and over temperature
- External interlock signal and inductive load discharge circuitry
- Compatible with laboratory equipment and standalone installations
Learn More
Quick View
CAEN ELS FAST-Bi-1K5 Power Supply
The FAST-Bi-1K5 Power Supply is a high precision bipolar, bidirectional and regenerative digital power supply designed for demanding testing environments. Built in a compact 19 inch 2U form factor, it supports four quadrant operation and provides output ratings up to ±100 V and ±150 A. With advanced digital control, embedded monitoring tools and energy regenerative architecture, this power supply offers an efficient solution for battery testing, EV systems, fuel cells and laboratory research applications.

Key Features
- 1.5 kW bipolar bidirectional regenerative power supply
- Four quadrant operation across the voltage current plane
- Output ratings up to ±100 V and ±150 A
- Multiple regulation modes including CV, CC, CP and CR
- High precision 24 bit resolution at 100 kHz sampling rate
- Built in Arbitrary Waveform Generator operating at 100 kHz
- Integrated 4 channel oscilloscope for signal monitoring
- Embedded web server interface for remote control and configuration
- Gigabit Ethernet connectivity with TCP IP and UDP communication
- Energy regenerative architecture returning excess power to the grid
- Low noise and ripple due to high switching frequency design
- Parallel operation of up to four units for increased power capability
Learn More
Quick View
CAEN ELS FAST-PS Power Supply
The FAST-PS Power Supply is a high performance bipolar digital power supply series designed for fast and precise current and voltage control. With power ratings up to 600 W, this advanced unit combines digital control technology with built in waveform generation, signal monitoring and flexible communication interfaces. The integrated web server and powerful control architecture make the FAST-PS Power Supply an ideal solution for laboratories, research facilities and demanding industrial applications.

Key Features
- High performance bipolar digital power supply with power ratings up to 600 W
- Precise current and voltage control modes for flexible operation
- Built in Arbitrary Waveform Generator operating at 100 kHz
- Integrated four channel oscilloscope with advanced triggering features
- Embedded Linux operating system with web based user interface
- High speed Ethernet connectivity with 10/100/1000 Mbit communication
- Dual SFP or SFP+ communication slots for fast feedback control
- Digital control loop for precise response and load adaptation
- Local display and interface for monitoring voltage and current
- Integrated protection including over voltage, over current and over temperature
- Optional analog control input for amplifier compatibility
Learn More
Quick View
CAEN ELS FAST-PS-1K5 Power Supply
The FAST-PS-1K5 Power Supply is a high performance bipolar digital power supply designed for demanding laboratory, industrial and research applications. Delivering up to 1.5 kW of output power, this advanced system provides precise current and voltage control along with integrated monitoring tools and flexible communication interfaces. With digital control architecture, built in web server functionality and high stability sensing technology, the FAST-PS-1K5 Power Supply offers a reliable solution for battery testing, superconducting magnet systems and advanced power electronics applications.

Key Features
- High performance bipolar digital power supply with power ratings up to 1.5 kW
- Accurate current and voltage control for precision power applications
- Output models available up to 100 A and 100 V
- Digital control loop for flexible configuration and load adaptation
- Integrated web server for monitoring and system configuration
- Built in waveform generation and triggering capabilities
- Four channel oscilloscope monitoring at 100 ksps
- High precision current sensing using 0 FLUCS DCCT technology
- Gigabit Ethernet connectivity with additional SFP communication slots
- Optional four quadrant operation with dedicated external crate
- Quench protection support for superconducting magnet systems
- Local display and interface for monitoring voltage and current
Learn More
Quick View
CAEN ELS FAST-PS-M Power Supply
The FAST-PS-M Power Supply is a high performance monopolar digital power supply designed for applications that require stable current and voltage control. With output power up to 900 W, this advanced power system integrates a digital control loop, embedded web server and built in waveform and monitoring tools. Its high precision sensing technology and fast communication interfaces make the FAST-PS-M Power Supply an ideal solution for research laboratories, industrial test systems and precision electronics applications.

Key Features
- High performance monopolar digital power supply with output power up to 900 W
- Precise current and voltage control with digital regulation
- Built in Arbitrary Waveform Generator operating at 100 ksps
- Integrated four channel oscilloscope with high precision monitoring
- Embedded web server interface for configuration and control
- High speed Ethernet connectivity with 10/100/1000 Mbit support
- Dual SFP communication slots for fast feedback and system integration
- Low noise output and high bandwidth performance
- High precision sensing using 0 FLUCS current transducer technology
- Local colour display and interface for monitoring and configuration
- Internal protections including over voltage and over current protection
- Optional analog control input for amplifier compatibility
Learn More
Quick View
CAEN ELS FMC-4SFP+ Adapter
The FMC-4SFP+ Adapter is a high performance FPGA Mezzanine Card designed to provide fast SFP and SFP+ communication through a High Pin Count FMC interface. Built according to the VITA 57.1 FMC standard, the adapter enables dual or quad channel optical communication for advanced FPGA based systems. With flexible voltage compatibility, integrated clock generation, and support for multiple SFP modules, the FMC-4SFP+ Adapter delivers reliable high speed connectivity for data acquisition, networking, and signal processing applications.

Key Features
- High Pin Count FMC adapter based on the VITA 57.1 standard
- Supports dual or quad channel SFP and SFP+ communication
- Up to four SFP or SFP+ module slots
- Designed for high speed optical communication with FPGA carriers
- Compatible with a wide range of FMC carrier boards
- Flexible operating voltage from 1.5 V to 3.3 V through VADJ
- Integrated LVDS clock oscillator with adjustable frequency
- Clock frequency range from 10 MHz to 280 MHz
- DIP switch and I2C interface for oscillator configuration
- Automatic module configuration for stand alone operation
- Component placement compatible with various carrier layouts
- Designed to fit carriers without front panel modifications
Learn More
Quick View
CAEN ELS FMC-MOTDRV22 Motor Driver
The FMC-MOTDRV22 Motor Driver is a cost efficient dual channel stepper motor control board designed for systems that require reliable motion control within an FPGA based environment. Built according to the ANSI VITA 57.1 FMC standard, this mezzanine card enables precise control of bipolar stepper motors while providing integrated diagnostics and protection features. With programmable chopper modes, motor load detection, and flexible voltage options, the FMC-MOTDRV22 Motor Driver offers a dependable solution for automation, instrumentation, and scientific motion control systems.

Key Features
- Dual channel stepper motor driver design
- Compatible with ANSI VITA 57.1 FMC standard carrier boards
- Supports bipolar stepper motors for precision motion control
- Maximum output up to 12 V or 24 V at 1.8 A per coil depending on model
- Programmable chopper slope with three operating modes
- Integrated motor load detection without external sensors
- Load dependent current control for efficient motor operation
- Diagnostic monitoring and system protection features
- Protection against overcurrent, short to ground, undervoltage and overheating
- Encoder interface support for motor position monitoring
- Flexible configuration with internal or external power supply options
- Dedicated cabling solutions available for easy installation
Learn More
Quick View
CAEN ELS FMC-PICO-1M4 Ammeter
The FMC-PICO-1M4 Ammeter is a high precision four channel current measurement board designed for accurate monitoring of very low bipolar currents in advanced electronic systems. Built as a Low Pin Count FPGA Mezzanine Card compliant with the VITA 57.1 FMC standard, this module combines high resolution data acquisition with low latency performance. With 20 bit resolution and sampling speeds up to 1 MSPS, the FMC-PICO-1M4 Ammeter provides reliable current monitoring for scientific instrumentation, accelerator systems, and precision measurement environments.

Key Features
- Four channel high precision floating ammeter design
- 20 bit resolution analog to digital conversion
- Sampling rate up to 1 MSPS for fast data acquisition
- Independent and simultaneous sampling for each channel
- Multiple measurement ranges depending on board version
- Bipolar current measurement capability
- Floating input channels up to ±300 V relative to FMC ground
- Low noise analog front end for precise measurements
- Minimal temperature dependence for stable performance
- Optional factory calibration with EEPROM stored calibration data
- External trigger support for synchronized acquisition
- Separate SPI communication links for each channel
- Compatible with VITA 57.1 FMC Low Pin Count carrier boards
Learn More
Quick View
CAEN ELS HV-PANDA HV Board
The HV-PANDA HV Board is a high voltage Advanced Mezzanine Card designed for MTCA.4 systems that require reliable and precise high voltage delivery. This double width AMC board integrates four independent high voltage channels capable of delivering up to 6 kV output. Built using proven high voltage technology, the HV-PANDA HV Board ensures stable operation and secure power control for detector and instrumentation applications. With integrated safety interlocks, flexible channel configurations, and dedicated monitoring software, the board offers a dependable solution for advanced scientific and industrial systems.

Key Features
- Double width AMC board designed for MTCA.4 systems
- Four independent high voltage channels
- Maximum output up to 6 kV per channel depending on configuration
- Multiple channel rating options including 6 kV, 4 kV, and 500 V
- Maximum power up to 6 W per channel
- Positive or negative polarity configuration available
- Front panel interlocks for individual channel safety control
- Additional 12 V power input for high voltage operation
- RTM interface for MTCA backplane connectivity
- Reliable high voltage technology for detector applications
- Graphical user interface for simple system control
- Dedicated drivers for configuration and monitoring
Learn More
Quick View
CAEN ELS NGPS Power Supply
The NGPS Power Supply is a high stability digital power supply series designed for demanding industrial and scientific applications. Delivering up to 10 kW of output power and scalable up to 40 kW through parallel operation, this advanced system provides precise current and voltage control with exceptional temperature stability. Equipped with Gigabit Ethernet connectivity, an embedded web server, waveform generation capability and a built in oscilloscope, the NGPS Power Supply offers a powerful and flexible solution for laboratories, research facilities and high performance power systems.

Key Features
- High stability digital power supply with output power up to 10 kW
- Parallel operation capability allowing up to 40 kW system power
- Precise current and voltage control using advanced digital architecture
- Temperature stabilized internal section for extremely low drift
- High speed 10/100/1000 Mbit Ethernet communication
- Ultra fast SFP interface supporting update rates up to 100 kHz
- Embedded Linux operating system with web based configuration interface
- Built in Arbitrary Waveform Generation for custom signal control
- Integrated four channel oscilloscope for real time monitoring
- Remote sensing terminals for accurate voltage control at the load
- Optional analog control input for compatibility with legacy systems
- Low noise and high efficiency performance for demanding applications
Learn More
Quick View
CAEN ELS Polarity Inverters
The Polarity Inverters series provides a reliable solution for switching the output polarity of high power converters. Designed to work seamlessly with monopolar power supplies such as NGPS systems, these polarity switching units support current ratings up to 1000 A and voltage up to 250 V. With integrated safety interlocks and enabling signals, the system ensures secure polarity inversion for demanding industrial and scientific applications.

Key Features
- Reliable polarity switching for power converters up to 1000 A
- Maximum voltage rating of 250 V for high power applications
- Compatible with monopolar power supplies including NGPS systems
- Available in multiple current ratings including 200 A, 420 A, 630 A and 1000 A
- Auxiliary AC power input from 100 to 240 VAC at 50 or 60 Hz
- Integrated interlock and enabling signals for safe switching operations
- Supports control signals up to 240 V at 16 A and 10 A
- Designed for applications requiring polarity reversal such as magnet degaussing
- Standard rack mounting design with 19 inch enclosure options
- Durable industrial construction for reliable long term operation
Learn More
Quick View
CAEN ELS PS1112S Power Supply
The PS1112S Power Supply is a compact low noise power supply designed to deliver stable 12 V output for sensitive measurement and instrumentation systems. Built with a mixed switching linear architecture, this high efficiency unit ensures extremely low ripple and noise levels that help maintain measurement accuracy. With a maximum output power of 14 W and a robust stainless steel enclosure, the PS1112S Power Supply is an ideal solution for powering precision electronic devices and scientific instruments.

Key Features
- Low noise fixed voltage power supply with stable 12 V output
- Maximum output power of 14 W for precision electronic systems
- Maximum output current of 1.2 A depending on input conditions
- Mixed switching linear power architecture for low noise performance
- Extremely low ripple and noise in the DC to 1 MHz frequency range
- Compact and durable stainless steel enclosure
- Designed for accurate measurement and instrumentation systems
- High efficiency design while maintaining low noise operation
- Suitable for powering electrometers and precision measurement devices
- Optimized for laboratory and research equipment applications
Learn More
Quick View
CAEN ELS PS1215 Power Supply
The PS1215 Power Supply is a compact, high-precision dual-voltage power supply delivering ±15 V output for sensitive instrumentation. Engineered with a mixed switching-linear design, it ensures ultra-low noise performance for high-accuracy devices, particularly the 0-FLUCS current transducer series. Housed in a robust stainless steel enclosure, it provides 27 W of clean power while minimizing cable-related noise pickup, making it ideal for laboratory and research applications.

Key Features
- Dual-voltage output: ±15 V for precision instruments
- Maximum output power: 27 W with AC derating
- Ultra-low noise: 0.001 % for clean DC operation
- Mixed switching-linear design for efficiency and low ripple
- Compact and durable stainless steel enclosure
- Compatible with 0-FLUCS DC Current Transducer series
- Two cable options for voltage-output or current-output transducers
- Ideal for high-precision DCCT measurements
- Reduces cable length noise pickup for sensitive setups
- Optimized for laboratory and high-accuracy instrumentation
Learn More
Quick View
CAEN ELS QDS Quench Detection
The QDS Quench Detection System is a 4-channel precision device designed for fast and reliable superconducting magnet protection. Each channel supports independent multi-range measurement, floating up to 100 V, and provides high-resolution data for both absolute and differential quench detection. Configurable detection windows from 1 ms to 1 s and Ethernet connectivity allow seamless control and integration with magnet power systems. Ideal for laboratories and industrial applications requiring high-accuracy magnet monitoring.

Key Features
- 4 independent floating channels up to 100 V
- Multi-tap precision measurement: ±20 V to ±20 mV ranges
- Ultra-high resolution: 2.4 μV to 2.5 nV
- Configurable detection windows from 1 ms to 1 s
- Absolute and differential quench detection modes
- 24-bit resolution and 100-kHz sampling rate per channel
- Fast 10/100/1000 Mbit Ethernet connectivity (TCP-IP/UDP)
- Interlock and output status signals for system integration
- Persistent Switch driver outputs: 12 V and 24 V
- Remote firmware updates via CAEN ELS website
Learn More
Quick View
CAEN ELS REGUL8OR Power Controller
The REGUL8OR Power Controller is a high performance programmable power supply controller designed to transform standard power converters into advanced digitally controlled power systems. Equipped with a built in web server, waveform generation tools and a multi channel oscilloscope, it enables precise monitoring and control of voltage and current in demanding laboratory and industrial environments. Supporting voltage up to ±200 V and current measurements up to 1000 A with 0 FLUCS DCCT technology, this controller provides exceptional accuracy, stability and flexibility.

Key Features
- Digital programmable power supply controller with advanced FPGA based control
- Supports voltage up to ±200 V and current measurement up to 1000 A
- Integrated 0 FLUCS current transducer technology for high precision sensing
- Embedded web server for configuration and monitoring
- Built in Arbitrary Waveform Generator for custom signal generation
- Integrated four channel oscilloscope for real time measurement
- Gigabit Ethernet connectivity with TCP IP and UDP communication
- Fanless design for quiet and reliable operation
- Compatible with multiple programmable power supplies and amplifiers
- High resolution waveform monitoring at 100 ksps per channel
Learn More

Products

Key Features

Key Features

Key Features

Key Features

Key Features

Key Features

Key Features

Key Features

Key Features

Key Features

Key Features

Key Features

Key Features

Key Features

Key Features

Key Features