HIOKI E E CORPORATION

The BT3554-50 Battery Tester streamlines the inspection of UPS and lead-acid batteries by providing fast, accurate measurement of internal resistance and voltage without taking the battery offline. Designed for field use, it combines precision, noise reduction technology, and smart wireless connectivity for efficient diagnostics and data management.

Key Features

• Measure internal resistance and voltage in just 2 seconds
• Diagnose battery condition (PASS, WARNING, FAIL) instantly
• Perform measurements while battery is online
• Noise-resistant technology ensures reliable readings
• Screen and audio guidance for simplified measurement
• Save and manage data via smartphone, tablet, or Excel® using GENNECT Cross (Z3210 adapter required)
• New ergonomic leads (L2020 Pin Type) for easy access to battery terminals
• Optional wall and shoulder straps for hands-free operation

The BT4560-50 Battery Impedance Meter provides accurate Electrochemical Impedance Spectroscopy (EIS) measurements for high-capacity batteries in EVs and ESSs. Designed for R&D and manufacturing, it simplifies the testing of internal battery resistance, charge transfer, and electrode behavior, while enabling multi-battery evaluation systems.

Key Features

• EIS measurement frequency: 0.01 Hz to 1.05 kHz
• Simultaneous impedance, voltage, and temperature measurement
• Dedicated evaluation software for R&D analysis
• Compatible with third-party equivalent circuit analysis
• LAN interface for production line integration and multi-channel testing
• Measures very low impedances: 1 mΩ or less
• Four-terminal pair probes reduce noise and ensure stable readings

The BT4560-60 Battery Impedance Meter delivers reliable Electrochemical Impedance Spectroscopy (EIS) measurements for EVs, energy storage systems, and high-capacity battery R&D and production. Engineered for precision and efficiency, it enables quick assessment of battery cell health, internal resistance, and electrode performance.

Key Features

• EIS measurement frequency: 0.01 Hz to 10 kHz
• Simultaneous impedance, voltage, and temperature measurement
• Dedicated software for R&D evaluation
• Compatible with third-party equivalent circuit analysis
• Scalable multi-battery testing via SW1001/SW1002 Switch Mainframes
• Measures very low impedances: 1 mΩ or less
• Four-terminal pair measurement for stable, noise-resistant readings

The Digital Multimeter DT4281 is Hioki’s flagship high precision multimeter, engineered for advanced electrical and power system testing. Featuring a 60000 count display, true RMS measurement, and industry leading safety design, it delivers fast, accurate results even in complex and high energy environments.

Key Features

• High resolution 60000 count digital multimeter
• Excellent DC voltage accuracy of ±0.025 percent
• Wide AC voltage frequency range from 20 Hz to 100 kHz
• True RMS measurement for accurate readings on distorted waveforms
• Low pass filter for inverter and harmonic rich signals
• Clamp sensor based current measurement for enhanced safety
• Terminal shutter mechanism to prevent incorrect lead insertion
• Dual display for simultaneous voltage and frequency monitoring
• CAT IV 600 V and CAT III 1000 V safety rated
• Designed and manufactured in Japan with 3 year warranty

The DM7275 Precision DC Voltmeter is a high stability 7 and a half digit DC voltmeter designed to bridge the gap between research environments and high volume production lines. With a guaranteed one year accuracy of 20 ppm, it delivers reliable and repeatable measurements for lithium ion batteries, advanced capacitors, and next generation electronic components.

Key Features

• 7 and a half digit DC voltage measurement
• 1 year guaranteed 20 ppm accuracy
• Ideal for R and D and production line testing
• Capacitance contact check using built in C monitor
• Fully automatic self calibration for long term stability
• Resistant to temperature fluctuations
• Simultaneous voltage and temperature measurement
• Temperature compensated voltage display
• Built in EXT I O, LAN, and USB interfaces
• Optional GP IB or RS 232C communication models
• Built in variable power supply for global production use

The DM7275 Precision DC Voltmeter provides 7½-digit resolution and 20 ppm accuracy, making it perfect for R&D, production lines, and high-precision battery testing. Its advanced contact check, temperature compensation, and multiple connectivity options ensure reliable measurement for lithium-ion batteries, EV components, and next-generation devices.

Key Features

• High-accuracy 7½-digit DC voltmeter with 20 ppm (0.002%) guaranteed accuracy
• Built-in capacitance contact check for maximum measurement reliability
• Temperature compensation converts voltage to standard temperature values
• Fully automatic self-calibration for long-term stability
• Built-in EXT I/O, LAN, USB, GP-IB (DM7275-02), and RS-232C (DM7275-03)
• Supports R&D and production line environments worldwide
• Simultaneous measurement of temperature and voltage
• Ideal for Li-ion batteries, EV components, and electrical double-layer capacitors

The DM7276 Precision DC Voltmeter is a 7 and a half digit high accuracy instrument designed for ultra precise DC voltage measurement. With industry leading 9 ppm accuracy, it is ideal for lithium ion battery aging tests, capacitor evaluation, and next generation energy device development.

Key Features

• 7 and a half digit precision with 9 ppm accuracy
• Designed for lithium ion battery aging and evaluation
• Built in capacitance contact check for reliable measurements
• Fully automatic self calibration for long term stability
• Resistant to temperature fluctuations and environmental changes
• Simultaneous voltage and temperature measurement
• Temperature compensated voltage display
• Supports global production with variable power supply
• Built in EXT I O, LAN, and USB interfaces
• Optional GP IB or RS 232C communication models

The DMM Station MR8990 combined with the MR8740 or MR8741 Memory HiCorder delivers high precision, simultaneous DC voltage measurement across up to 32 channels. Designed for capturing minute voltage fluctuations, this system is ideal for advanced sensor analysis, battery testing, and automotive electronics evaluation.

Key Features

• High precision DC voltage measurement using DVM Unit MR8990
• Simultaneous sampling across multiple channels
• Supports up to 32 channels with expandable configuration
• Measures minute voltage fluctuations with high resolution
• Accuracy of ±0.01 percent with 1.2 million count resolution
• High speed sampling up to 500 samples per second
• Isolated inputs for enhanced safety and signal integrity
• Suitable for battery, sensor, and automotive testing
• Rack mountable system for laboratory and production use
• Compatible only with MR8740 and MR8741 Memory HiCorders

Key Features:

• Fully automated battery testing for large packs up to 300 V
• Simultaneous measurement of internal resistance (AC-IR) and open-circuit voltage (OCV)
• Wide resistance range: 3 mΩ to 3.1 kΩ with 0.1 μΩ resolution
• Voltage measurement ranges: 6 V, 60 V, and 300 V with high precision
• Equipped with LAN interface for production line integration
• Fast, accurate AC four-terminal method
• Resistant to static electricity (±30 kV contact discharge)
• Ideal for high-voltage pack inspection and quality control

Key Features:

• Fully automated battery testing for small cells and packs up to 60 V
• Simultaneous measurement of internal resistance (AC-IR) and open-circuit voltage (OCV)
• Wide resistance range: 0 Ω to 3.1 kΩ with 1 μΩ resolution
• Voltage measurement ranges: 6 V and 60 V with high precision
• Equipped with LAN interface for integration with production lines
• Rapid measurement using AC four-terminal method
• Highly resistant to static electricity (±30 kV contact discharge)

Key Features:

• Fully automated battery testing for large cells and mid-sized packs up to 100 V
• Simultaneous measurement of internal resistance (AC-IR) and open-circuit voltage (OCV)
• Wide resistance range: 3 mΩ to 3.1 kΩ with 0.1 μΩ resolution
• Voltage measurement ranges: 6 V, 60 V, and 100 V with high precision
• Equipped with LAN interface for production line integration
• Fast, accurate AC four-terminal method
• Resistant to static electricity (±30 kV contact discharge)
• Ideal for production, shipping inspection, and quality control

Hioki Digital Multimeter DT4282 is designed for professionals who demand high accuracy, reliability, and safety in every measurement.

Key Features:

• High-precision 60,000-count, 5-digit display for detailed readings.
• Exceptional ±0.025% DC voltage accuracy for laboratory-grade results.
• Wide AC voltage frequency range (20 Hz–100 kHz) for diverse applications.
• Built-in low-pass filter to eliminate high harmonic noise.
• Direct 10 A input ideal for high-current measurements.
• Dual display shows voltage and frequency simultaneously.
• Terminal shutter mechanism enhances operator safety.
• Rated CAT IV 600 V / CAT III 1000 V for secure operation in demanding environments.

The Hioki DT4261 Digital Multimeter is a professional-grade tool that enhances field analysis, safety, and efficiency. Built for electrical engineers and maintenance professionals, it combines exceptional measurement accuracy, advanced safety features, and wireless connectivity for smart data handling.

Key Features:

• True RMS measurement for accurate readings
• CAT IV 600 V / CAT III 1000 V safety rating
• Wireless connectivity with optional Z3210 adapter
• Excel® Direct Input Function for instant data transfer
• Terminal shutters prevent incorrect lead insertion
• Fuse check and automatic AC/DC voltage detection
• Harmonic measurement up to the 30th order with GENNECT Cross
• IP54 dust and water resistance
• Drop-proof design (1-meter concrete drop protection)
• Wide temperature range: -25°C to 65°C

Key Features:

• Industry-leading precision for OCV and AC-IR testing of EV battery cells
• Ultra-high resolution for advanced cell grading (down to 0.01 µΩ)
• Fast testing speeds with excellent reproducibility
• MIR mode enables parallel testing without interference
• Channel-specific correction and multiplexer support
• Reliable long-term system operation with route resistance monitoring
• Easy integration with existing systems (BT3562A command compatibility)
• Compact, lightweight design for lab or production lines

The Hioki Rack-mounted Multi-channel System Recorder (MR8741/MR8740) is a powerful, high-speed, single-device solution for waveform recording and generation. Ideal for test systems, it offers high-resolution, isolated multi-channel measurements with fast sampling capabilities.

Key Features:

• Integrated waveform recording and generation in one device
• Equipped with DVM Unit MR8990 for high-accuracy 24-bit resolution measurements
• Supports up to 16 channels (MR8741) for multi-channel testing
• Isolated input between channels and from input to chassis (up to 300 V AC/DC)
• High-speed sampling up to 20 MS/s
• Compact rack-mountable design (4U height, under 180 mm depth)
• Monitor display and setting access via DVI-D and mouse
• Enables remote measurement and control via LAN
• Browser-based screen monitoring or advanced control via Hioki 9333 LAN Communicator

The Memory HiCorder MR8848 is a rugged, high-speed data acquisition recorder designed for capturing critical transient events in demanding industrial and infrastructure environments.

Key Features

• Durable, shock-resistant portable design for field use
• Isolated analog channels for safe multi-system measurements
• 32 analog and 64 logic channels for complex signal analysis
• High-speed sampling to capture fast transient waveforms
• Large-capacity memory for long-duration recording
• Built-in waveform and numerical analysis for pass or fail judgments
• Optional on-site printer for secure, tamper-proof documentation