HIOKI E E CORPORATION

The Hioki 3269 Power Supply is a four-channel unit designed to provide stable power to Hioki flat bandwidth AC/DC current probes, including the 3273-50 to 3276 series, CT6700, and CT610 series. It enables accurate current measurement output for Memory HiCorders, oscilloscopes, and other data acquisition instruments.

Key Features

• Supplies power to Hioki current probes 3273-50 to 3276, CT6700, CT610 series
• Four-channel power output for multi-probe setups
• Compatible with Memory HiCorders and oscilloscopes
• Output voltage: ±12 V ±0.5 V, maximum 2.5 A (total of all channels)
• Compact and lightweight design: 80 × 119 × 200 mm, 1.1 kg
• Wide AC input range: 100–240 V AC, 50/60 Hz, 170 VA max
• Simple integration into data acquisition setups
• Note: Requires compatible current sensor to operate

The BT3554-50 Battery Tester streamlines the inspection of UPS and lead-acid batteries by providing fast, accurate measurement of internal resistance and voltage without taking the battery offline. Designed for field use, it combines precision, noise reduction technology, and smart wireless connectivity for efficient diagnostics and data management.

Key Features

• Measure internal resistance and voltage in just 2 seconds
• Diagnose battery condition (PASS, WARNING, FAIL) instantly
• Perform measurements while battery is online
• Noise-resistant technology ensures reliable readings
• Screen and audio guidance for simplified measurement
• Save and manage data via smartphone, tablet, or Excel® using GENNECT Cross (Z3210 adapter required)
• New ergonomic leads (L2020 Pin Type) for easy access to battery terminals
• Optional wall and shoulder straps for hands-free operation

The BT4560-50 Battery Impedance Meter provides accurate Electrochemical Impedance Spectroscopy (EIS) measurements for high-capacity batteries in EVs and ESSs. Designed for R&D and manufacturing, it simplifies the testing of internal battery resistance, charge transfer, and electrode behavior, while enabling multi-battery evaluation systems.

Key Features

• EIS measurement frequency: 0.01 Hz to 1.05 kHz
• Simultaneous impedance, voltage, and temperature measurement
• Dedicated evaluation software for R&D analysis
• Compatible with third-party equivalent circuit analysis
• LAN interface for production line integration and multi-channel testing
• Measures very low impedances: 1 mΩ or less
• Four-terminal pair probes reduce noise and ensure stable readings

The BT4560-60 Battery Impedance Meter delivers reliable Electrochemical Impedance Spectroscopy (EIS) measurements for EVs, energy storage systems, and high-capacity battery R&D and production. Engineered for precision and efficiency, it enables quick assessment of battery cell health, internal resistance, and electrode performance.

Key Features

• EIS measurement frequency: 0.01 Hz to 10 kHz
• Simultaneous impedance, voltage, and temperature measurement
• Dedicated software for R&D evaluation
• Compatible with third-party equivalent circuit analysis
• Scalable multi-battery testing via SW1001/SW1002 Switch Mainframes
• Measures very low impedances: 1 mΩ or less
• Four-terminal pair measurement for stable, noise-resistant readings

The Hioki 3153 HiTESTER is an all-in-one solution for insulation resistance and AC/DC voltage withstand testing. It is fully programmable for automated multi-point testing, making it ideal for industrial, manufacturing, and electrical safety applications.

Key Features

• Programmable insulation testing from 50 V to 1200 V DC
• Dielectric strength testing for AC/DC voltages up to 5 kV
• Store and program up to 32 test files with 50 steps each
• Optional scanner for automatic multi-point testing
• Accurate voltage generation via PWM method, independent of supply voltage
• Ramp timer function for controlled voltage rise/fall during testing
• Digital display of measured voltage, current, and resistance
• Compact design with full remote operation capability

The Hioki 3930 High Voltage Scanner is a passive auxiliary device designed to streamline multi-point high-voltage testing when paired with the Hioki 3153 or a sequencer. Its isolated channels allow safe and efficient AC/DC voltage testing while minimizing connection changes, making it ideal for industrial testing and quality control applications.

Key Features

• Supports AC/DC high-voltage output up to 5 kV
• Multi-point testing: 8 channels per unit, up to 32 channels with 4 connected units
• Fully isolated HV I/O, control lines, and power supply
• Operates in multi-mode or single-mode scanning for flexible testing
• Compatible with Hioki 3153 program function or standard sequencer
• Fast operation with <6 ms response and recovery time
• Includes HV test leads, control connector cable, and grounding cable

Key Features:

• Fully automated battery testing for large packs up to 300 V
• Simultaneous measurement of internal resistance (AC-IR) and open-circuit voltage (OCV)
• Wide resistance range: 3 mΩ to 3.1 kΩ with 0.1 μΩ resolution
• Voltage measurement ranges: 6 V, 60 V, and 300 V with high precision
• Equipped with LAN interface for production line integration
• Fast, accurate AC four-terminal method
• Resistant to static electricity (±30 kV contact discharge)
• Ideal for high-voltage pack inspection and quality control

Key Features:

• Fully automated battery testing for small cells and packs up to 60 V
• Simultaneous measurement of internal resistance (AC-IR) and open-circuit voltage (OCV)
• Wide resistance range: 0 Ω to 3.1 kΩ with 1 μΩ resolution
• Voltage measurement ranges: 6 V and 60 V with high precision
• Equipped with LAN interface for integration with production lines
• Rapid measurement using AC four-terminal method
• Highly resistant to static electricity (±30 kV contact discharge)

Key Features:

• Fully automated battery testing for large cells and mid-sized packs up to 100 V
• Simultaneous measurement of internal resistance (AC-IR) and open-circuit voltage (OCV)
• Wide resistance range: 3 mΩ to 3.1 kΩ with 0.1 μΩ resolution
• Voltage measurement ranges: 6 V, 60 V, and 100 V with high precision
• Equipped with LAN interface for production line integration
• Fast, accurate AC four-terminal method
• Resistant to static electricity (±30 kV contact discharge)
• Ideal for production, shipping inspection, and quality control

The Hioki BT5525 Tester is engineered for battery production lines to detect microscopic insulation defects and contamination before shipment. It ensures safety, reduces false negatives, and accelerates high-speed testing, making it ideal for modern battery manufacturing.

Key Features

• Proprietary BDD function detects minuscule internal short-circuits caused by contamination
• Stable insulation resistance testing even in noisy environments
• Contact check function prevents erroneous judgments
• Maximum test voltage of 500 V for battery cell, module, and pack testing
• High-speed charging up to 50 mA and discharging up to 40 mA for faster testing
• Compact design allows integration into battery production systems
• Cost-effective solution for small to large battery cells and packs
• PC application for waveform review and CSV data export

The Hioki IR5050 High Voltage Insulation Tester delivers precise and reliable insulation resistance testing up to 5 kV and 10 TΩ. Designed for professionals, it offers advanced diagnostics, wireless connectivity, and rugged durability — making it ideal for industrial maintenance and electrical testing.

Key Features:

• Measures insulation resistance up to 10 TΩ
• Test voltages from 250 V to 5000 V DC
• Calculates and displays PI, DAR, and DD diagnostics automatically
• Supports both wireless (Bluetooth) and USB data transfer
• Compact, lightweight design with IP65-rated carrying case
• Step and ramp voltage testing for advanced insulation analysis
• CAT IV and CAT III safety ratings for enhanced protection
• Compatible with GENNECT Cross app for real-time reporting

Key Features:

• Safely measure solar PV insulation resistance while generating power
• CAT III 2000 V and CAT IV 1000 V safety rating for reliable high-voltage testing
• 5 kV test voltage and 10 TΩ insulation resistance range
• Specialized PV insulation measurement mode compliant with IEC 62446-1
• Automatically calculates and displays PI, DAR, and DD diagnostics
• Flexible voltage adjustment from 250 V to 5000 V
• Data memory with wireless and USB connectivity options
• Compact, lightweight design with IP65-rated carrying case for durability

Key Features:

• Industry-leading precision for OCV and AC-IR testing of EV battery cells
• Ultra-high resolution for advanced cell grading (down to 0.01 µΩ)
• Fast testing speeds with excellent reproducibility
• MIR mode enables parallel testing without interference
• Channel-specific correction and multiplexer support
• Reliable long-term system operation with route resistance monitoring
• Easy integration with existing systems (BT3562A command compatibility)
• Compact, lightweight design for lab or production lines

Key Features:

• Fastest insulation tester in the industry with results in as little as 50 ms
• Wide test voltage range: 25 V to 1000 V with 1 V resolution
• Quick residual voltage discharge for faster takt times
• Contact check function prevents false readings from poor connections
• Short-circuit check detects micro-shorts before testing
• Built-in LAN and RS-232C for system integration
• Compact, lightweight design ideal for battery and production line testing
• Models available: ST5520 (I/O output) and ST5520-01 (BCD output)

The SW1001 Switch Mainframe is designed to expand your battery testing capabilities by connecting multiple measuring instruments and multiplexer modules for fast, accurate, and automated multi-channel evaluation. Perfect for R&D and production lines, it supports OCV, internal resistance, external potential, and impedance measurements of battery cells up to 60 V DC.

Key Features

• Connect up to 3 SW9001 or SW9002 multiplexer modules
• Supports up to 66 channels (2-wire) or 18 channels (4-terminal pair)
• Switch between two measuring instruments seamlessly
• Accurate OCV, internal resistance, and external potential measurement
• Circuit-design optimized for precise impedance readings
• Channel switching as fast as 11 ms
• PC application support for easy multi-channel management
• Scan function automates sequential measurements across channels

The SW1002 Switch Mainframe is designed to expand multi-channel battery testing capabilities for research, development, and production environments. It supports connection of multiple measuring instruments and multiplexer modules to measure OCV, internal resistance, external potential, and AC impedance on battery cells up to 60 V DC.

Key Features

• Houses up to 12 SW9001 or SW9002 multiplexer modules
• Supports up to 264 channels (2-wire) or 72 channels (4-terminal pair)
• Switch between two measuring instruments for flexible testing
• Accurate OCV, internal resistance, and external potential measurement
• Circuit-design optimized for precise impedance readings (0.01% f.s.)
• Channel switching as fast as 11 ms
• Scan function automates sequential measurements across channels
• Compatible with PC application for multi-channel control and data management