HIOKI E E CORPORATION

The Hioki 3269 Power Supply is a four-channel unit designed to provide stable power to Hioki flat bandwidth AC/DC current probes, including the 3273-50 to 3276 series, CT6700, and CT610 series. It enables accurate current measurement output for Memory HiCorders, oscilloscopes, and other data acquisition instruments.

Key Features

• Supplies power to Hioki current probes 3273-50 to 3276, CT6700, CT610 series
• Four-channel power output for multi-probe setups
• Compatible with Memory HiCorders and oscilloscopes
• Output voltage: ±12 V ±0.5 V, maximum 2.5 A (total of all channels)
• Compact and lightweight design: 80 × 119 × 200 mm, 1.1 kg
• Wide AC input range: 100–240 V AC, 50/60 Hz, 170 VA max
• Simple integration into data acquisition setups
• Note: Requires compatible current sensor to operate

Hioki CM3289 Clamp Meter is a True RMS AC clamp meter designed for precise current measurement, even in tight or challenging environments.

Key Features:

• Measures AC current up to 1000 A with True RMS accuracy
• Wide operating range from -25°C to 65°C for harsh conditions
• Slim and compact clamp design for confined spaces
• Optional flexible sensor CT6280 for measuring up to 4199 A
• Measures voltage, resistance, and continuity in one device
• Drop-resistant and engineered for rugged environments
• Long battery life with auto power-save function

Hioki CM4371-50 Clamp Meter delivers high-precision AC/DC measurements with advanced safety and wireless data features, ideal for demanding electrical work.

Key Features:

• True RMS measurement up to 600 A AC/DC
• CAT IV 600 V, CAT III 1000 V safety ratings
• Measures DC voltages up to 2000 V with optional probe
• Wireless data transfer via GENNECT Cross app and Z3210 adapter
• Harmonic analysis up to the 30th order for system diagnostics
• Simultaneous RMS and crest inrush current measurement
• Automatic AC/DC detection for efficient testing
• Compact, rugged design for field reliability

Hioki CM4373-90 True RMS 2000A AC/DC Clamp Meter delivers precision and reliability for professionals working in demanding environments. Built for durability and accuracy, it includes a wireless adapter for real-time data transfer and enhanced field productivity.

Key Features:

• Measures up to 2000 A AC/DC with True RMS accuracy
• CAT IV 600 V, CAT III 1000 V safety rating
• Wireless connectivity via Z3210 adapter for instant data transfer
• Supports harmonic analysis (1st–30th order) using GENNECT Cross app
• Measures up to 2000 V DC with optional P2010 probe
• Automatic AC/DC detection for improved workflow efficiency
• IP54-rated enclosure for dust and water resistance
• Ideal for solar PV inspections, EV systems, and industrial maintenance

Hioki CM4375-90 True RMS 1000A AC/DC Clamp Meter delivers precision and reliability with a slim jaw design that fits easily into tight spaces. Built for modern electrical work, it features a wireless adapter for effortless data transfer and is ideal for solar, EV, and industrial applications.

Key Features:

• Measures up to 1000A AC/DC with True RMS accuracy
• Slim jaw design fits easily in tight panels and wiring setups
• Wireless communication via Z3210 adapter for fast data transfer
• Measures up to 2000V DC with optional P2010 probe
• CAT IV 600V / CAT III 1000V safety rating
• IP54 dustproof and waterproof design for durability
• Harmonic analysis (1st–30th order) using GENNECT Cross app
• Auto AC/DC detection and inrush current measurement for motors and equipment
• Guaranteed for 30,000 open-close jaw cycles

The Memory HiCorder MR8848 is a rugged, high-speed data acquisition recorder designed for capturing critical transient events in demanding industrial and infrastructure environments.

Key Features

• Durable, shock-resistant portable design for field use
• Isolated analog channels for safe multi-system measurements
• 32 analog and 64 logic channels for complex signal analysis
• High-speed sampling to capture fast transient waveforms
• Large-capacity memory for long-duration recording
• Built-in waveform and numerical analysis for pass or fail judgments
• Optional on-site printer for secure, tamper-proof documentation

The Memory HiCorder MR8870 is a compact, high-speed data acquisition recorder designed for waveform observation and RMS variation recording in maintenance and fault analysis applications.

Key Features

• Dual recording mode for instantaneous waveforms and RMS variations
• Two isolated analog channels with 2 MW internal memory
• Real-time saving of measured values to CF card
• Synchronize two instruments to record four channels at once
• High-speed performance up to 1 MS per second
• Compact handheld design for easy field transport
• Sharp QVGA TFT wide LCD for clear waveform viewing
• Ideal for elevator, motor, inverter, and machine diagnostics

The Memory HiCorder MR8875 is a high-speed, portable data acquisition recorder designed for vehicle testing, performance evaluation, and advanced multichannel measurements.

Key Features

• 1000 V direct input with instantaneous DC and RMS measurement
• Up to 16 to 60 channels with plug-and-play input modules
• High-speed simultaneous logging down to 2 microseconds
• Real-time recording directly to SD card for long-term logging
• 16-bit high-resolution measurement for accurate results
• Direct CAN bus input for onboard vehicle analysis
• Built-in FFT and waveform calculation for advanced analysis
• Intuitive touch screen interface for fast setup and operation
• Designed to withstand vibration and extreme temperatures

The Memory HiCorder MR8880 is a rugged, field-ready waveform recorder designed to capture high- and low-voltage signals safely in industrial and maintenance applications.

Key Features

• Direct 600 V input for three-phase power measurements
• CAT III 600 V isolation for safe high-voltage testing
• Four completely isolated analog channels
• Simultaneous recording of three-phase systems plus one spare channel
• Wide operating temperature range from minus 10 to 50 degrees Celsius
• Shock- and vibration-resistant housing with side protectors
• Built-in trigger and pre-trigger functions for precise event capture
• Presets function for fast and consistent setup

The Pulse Generator MR8791 is a plug-and-play input module for Hioki Memory HiCorders, designed for precise control simulation testing of electronic control systems.

Key Features

• Outputs pulse and pattern waveforms on up to eight channels
• Supports TTL level and open-collector output signals
• Designed for control simulation testing of ECUs and control boards
• Suitable for engine, airbag, brake, and power steering systems
• Wide frequency range for pulse and logic pattern generation
• Built-in self-test function for reliable operation
• Isolated design between unit and output channels
• Compact form factor for laboratory and test bench integration

The VIR Generator U8794 is a high-precision signal generation unit designed to simulate sensor outputs for ECU inspection, component testing, and maintenance applications.

Key Features

• Generates DC voltage, DC current, and resistance simulation signals
• Ideal for ECU inspection, electronic component testing, and equipment maintenance
• Eight fully isolated output channels for safe multi-signal simulation
• High-accuracy resistance simulation with automatic current calculation
• Designed exclusively for use with Memory HiCorder MR8740 series
• Supports sensor simulation testing without physical sensors
• Compact and lightweight design for bench and field environments

The Waveform Generator U8793 is a plug-and-play module for Hioki Memory HiCorders that enables arbitrary waveform output and anomaly simulation for advanced testing scenarios.

Key Features

• Outputs arbitrary waveform signals on up to two channels
• Reproduces waveforms recorded with a Memory HiCorder up to 15 V
• Generates customized arbitrary waveforms up to 15 V output
• Built-in function generator and sweep function
• Isolated design between unit and outputs and between channels
• Supports anomaly simulation and scenario-based testing
• Includes Waveform Maker software for easy waveform creation
• Designed for use with compatible Hioki Memory HiCorder models

High-speed 20 MS/s (*1), 32-channel, Fully Isolated Memory Recorder for On-site Jobs and R&D

Key Features:

• Supports a wide variety of measurements with a total of 17 plug-in modules
• Generate and record with a single unit
• Direct 1000 V high voltage input testing
• High-speed sampling up to 20MS/s (*1) with fully isolated inputs
• 32 analog channels + 16 logic ch to 20 analog channels + 64 logic ch
• High-speed sampling with waveform judgement function
• Soil-resistant construction strong against adverse working environments
• Big buttons coated to withstand industrial oil and residue
• Drop-in paper loading and one-touch setup, along with high-speed 50mm/s printing

Key Features:

• Measure even harmonic waveform components using the True RMS method
  
• Expanded -25°C to 65°C operating temperature range
  
• Connect the CT6280 flexible sensor to measure up to 4199 A in thick or paired wires
  
• Drop proof design withstands drop from a height of 1 meter

• CAT IV 600 V, CAT III 1000 V
  When using P2000: CAT III 2000 V, CAT IV 1000 V
  
• Easily get into tight spaces between cables thanks to thin sensor with a minimum cross-section span of 11 mm
  
• Measure up to 2000 A AC
  
• AC A, AC and DC V, DC+AC V, resistance, frequency, and more
• Easily transfer measurement data to your smartphone or tablet by using our free app GENNECT Cross or to an Excel® file (*1)
• Harmonic analysis from 1st to 30th order with GENNECT Cross (*1)

• Measure the fundamental waveform component using the average rectified method
• Expanded -25 °C to 65 °C operating temperature range
• Connect the CT6280 flexible sensor to measure up to 4199 A in thick or paired wires
• Drop proof design withstands drop from a height of 1 meter