PRODUCTS
TMetrix carries the following test and measurement products:
SERVICES
Explore our range of technical support and calibration services:
1 800 665 7301 | [email protected]

About Us | Events | Support | Resource Centre | Line Card | News | Blog | Careers | Contact Us

Products

Showing 1–16 of 65 results

  • Aim-TTi AC1000A Power Source
    Aim-TTi AC1000A Power Source
    Quick View
    Aim-TTi Aim-TTi AC1000A Power Source USD $ 961.78

    A precision AC power supply designed for EMC testing, pre-compliance setups, and product development labs.

    Key Features:

    • 1000W power output at 230V
    • Low harmonic distortion for clean AC testing
    • Delivers up to 4.4A RMS and 10A peak currents
    • EN61000–3–2 compliant for harmonic emissions
    • Available with UK, Schuko, or USA sockets
    • Comprehensive built-in overload protection
    • Simple connection via standard power connectors

     

    Select options This product has multiple variants. The options may be chosen on the product page
    Learn More
  • Aim-TTi CPX Series Power Supply - 1
    Quick View
    Aim-TTi Aim-TTi CPX Series Power Supply USD $ 895.52

    Reliable, flexible, and programmable power delivery for bench, system, and ATE applications.

    Key Features:

    • PowerFlex technology for variable V/A within power limits
    • Up to 60V and 20A, 180W or 420W per output
    • Dual or single isolated outputs
    • CV or CC operation with settings lock (S-Lock)
    • Selectable OVP trips and remote sense terminals
    • RS232, USB, LAN/LXI standard on P models
    • GPIB available as option (P models only)
    • Compact, rugged 3U quarter or half rack design
    • Analog remote control (CPX400SA model)

     

    Select options This product has multiple variants. The options may be chosen on the product page
    Learn More
  • CHEMICAL IMPEDANCE ANALYZER IM3590
    CHEMICAL IMPEDANCE ANALYZER IM3590 - 2
    Quick View
    HIOKI E E CORPORATION CHEMICAL IMPEDANCE ANALYZER IM3590 USD $ 10,866.40

    A high-performance analyzer designed for R&D applications involving electrochemical components, materials, batteries, and EDLCs. It enables precise impedance measurements essential for advanced evaluation and development.

    Key Features:

    • Wide frequency range: 1 mHz to 200 kHz for detailed ion and solution behavior analysis
    • Dual function: High-speed continuous LCR and sweep measurements with one device
    • Battery analysis: Measures internal impedance under no-load conditions
    • Ultra-fast sweep: Perform measurements in as little as 2 ms
    • High accuracy: ±0.05% basic precision for reliable R&D and testing
    • Advanced analysis: Supports Cole-Cole plots and equivalent-circuit modeling for electrochemical studies
    Add to cart
    Learn More
  • Data Logger LR8101, LR8102 - 01
    Data-Logger-LR8101-LR8102-04
    Quick View
    HIOKI E E CORPORATION Data Logger LR8101, LR8102

    The Data Logger LR8102 is a modular data acquisition system ideal for high-voltage and embedded applications. Designed for EV battery testing, PV inverter evaluation, and energy-efficient system analysis, it allows users to build the exact measurement system needed with flexible modules.

    Key Features

    • Modular design to expand channels as required
    • Supports real-time high-speed data transfer (LR8102)
    • Synchronize multiple loggers for large-scale measurements (LR8102)
    • High-precision measurements for voltage, current, and temperature
    • Ideal for battery charge/discharge testing and PV inverter production
    • Compatible with power measurement modules (M7103) and voltage/temperature modules (M7100, M7102)

     

    Learn More
  • EL-R Series DC Power Supply - 1
    EL-R Series DC Power Supply - 2
    Quick View
    Aim-TTi EL-R Series DC Power Supply USD $ 261.38

    Compact and quiet bench power supply with precision linear regulation and a range of output options for lab or system use.

    Key Features:

    • Linear regulated bench DC power supply
    • Single, dual, and triple output options
    • Up to 56V and 5A with up to 130W output
    • 4-digit voltage and current display per output
    • Constant voltage or constant current operation
    • Switchable local/remote sensing
    • Silent, fan-free convection cooling
    • Compact design saves bench space
    • Optional RS232 or USB interfaces (on select models)
    • Auxiliary output (1.5–5V/2A) on EL302RT

     

    Select options This product has multiple variants. The options may be chosen on the product page
    Learn More
  • EQUIVALENT CIRCUIT ANALYSIS FIRMWARE IM9000
    EQUIVALENT CIRCUIT ANALYSIS FIRMWARE IM9000
    Quick View
    HIOKI E E CORPORATION EQUIVALENT CIRCUIT ANALYSIS FIRMWARE IM9000 USD $ 1,831.09

    An advanced firmware upgrade for the IM3570 that enables quick and accurate equivalent circuit analysis, ideal for in-depth component evaluation and quality control.

    Key Features:

    • Automatically selects the optimal equivalent circuit model from five typical options
    • Minimizes discrepancies between measured and ideal frequency characteristics
    • Determines acceptance/rejection of L, C, and R elements with precision
    • Evaluates resonance sharpness (mechanical quality coefficient)
    • Enables detailed analysis of piezoelectric elements and inductors through resonance
    Add to cart
    Learn More
  • EX-R Series DC Power Supply - 1
    Quick View
    Aim-TTi EX-R Series DC Power Supply USD $ 463.05

    A versatile bench power supply series with mixed-mode regulation, ideal for lab or system environments.

    Key Features:

    • Single, dual, or triple outputs with up to 420W power
    • Output ranges: 18V/10A, 20V/20A, 35V/5A, 42V/10A
    • Dual model: 2×35V/4A or 150V/2A (combined)
    • Triple model includes 1.5–5V/5A auxiliary output
    • Independent 4-digit meters for each output
    • Local or remote sensing with constant V or I modes
    • Silent, fan-free operation for most models
    • Compact, space-saving design
    • RS232 or USB interfaces on select models

     

    Select options This product has multiple variants. The options may be chosen on the product page
    Learn More
  • FX Series DC Power Supply - 1
    FX Series DC Power Supply - 2
    Quick View
    Aim-TTi FX Series DC Power Supply USD $ 680.74

    Compact, versatile, and efficient, the FX Series is ideal for test labs, R&D, and educational use.

    Key Features:

    • PowerFlex autoranging outputs (up to 105W per channel)
    • Dual or triple output models (210W or 246W total)
    • SELV compliant and high safety design
    • Rotary, touch, and USB control options
    • Low ripple noise (<2mV), high resolution (1mV/1mA)
    • Voltage tracking and simultaneous V/I control
    • Remote USB interface with SCPI protocol
    • 25 user-defined memory presets
    • Switchable remote sense & intelligent cooling
    • Includes Test Bridge software for logging & automation

     

    Select options This product has multiple variants. The options may be chosen on the product page
    Learn More
  • HA1600A Harmonics Analyzer
    HA1600A Harmonics Analyzer
    Quick View
    Aim-TTi HA1600A Harmonics Analyzer

    High-performance analyzer for compliance testing to EN61000-3-2 and EN61000-3-3 with real-time harmonic and waveform data display.

    Key Features:

    • Complies with EN61000-3-2 and EN61000-3-3 standards
    • Measures rms/peak voltage & current, power, PF, phase
    • Histogram display for 40 harmonics
    • Voltage & current waveform visualization
    • Real-time graphical updates for live analysis
    • High-contrast 320 x 240 pixel LCD
    • USB, RS232, and printer interfaces
    • HA-PC-Link+ software included for full PC control
    • Available with UK, Schuko, or US sockets

     

    Learn More
  • T3DMM Series - Digital Multimeters
    T3DMM Series - Digital Multimeters
    Quick View
    Teledyne LeCroy HDA125 High-Speed Digital Analyzer USD $ 28,329.81

    HDA125 High-Speed Digital Analyzer brings advanced logic analysis capabilities to your existing Teledyne LeCroy oscilloscopes. Compact, accurate, and versatile.

    Key Features:

    • 12.5 GS/s sample rate for high-speed digital capture
    • Supports up to 18 digital channels
    • Compatible with WaveMaster/SDA 8 Zi-B and LabMaster 10Zi-A oscilloscopes
    • QuickLink Probe System for fast, low-impact signal access
    • 3 GHz bandwidth and 80 ps timing accuracy
    • Command bus decoding for in-depth DDR/LPDDR memory debugging
    • Minimal signal loading with 110 kΩ, 0.12 pF tip impedance
    • Cost-effective QuickLink solder-in tips simplify multi-point testing
    • Ideal for mixed-signal, high-speed, and memory interface debugging
    Select options This product has multiple variants. The options may be chosen on the product page
    Learn More
  • Hioki Battery Impedance Meter - 1
    Hioki Battery Impedance Meter - 2
    Quick View
    HIOKI E E CORPORATION Hioki BT4560 Battery Impedance Meter USD $ 7,598.84

    Key Features:

    • High-precision EIS measurement for EV and ESS battery testing
    • Frequency range: 0.01 Hz to 1.05 kHz for versatile impedance analysis
    • Measures impedance, voltage, and temperature simultaneously
    • Supports Nyquist (Cole-Cole) plotting for battery R&D
    • Four-terminal pair probes reduce magnetic flux for stable measurements
    • LAN interface enables multi-channel testing and integration into production systems
    • Compatible with third-party equivalent circuit analysis software
    • Reliable for both R&D and manufacturing applications

     

    Add to cart
    Learn More
  • Hioki M7103 Module - 01
    Hioki M7103 Module - 03
    Quick View
    HIOKI E E CORPORATION Hioki M7103 Module

    The Hioki M7103 Module is a compact, high-precision power measurement solution designed for multi-channel efficiency testing of PV inverters, high-voltage batteries, and energy storage systems. Ideal for embedded and production line applications, it offers unmatched scalability, speed, and accuracy.

    Key Features

    • Power analyzer-class accuracy: DC/AC ±0.07%
    • Supports up to 1500 V DC measurement
    • 12 channels per 4U rack unit; expandable to 120 channels
    • Synchronization Source Sharing for stable efficiency measurements
    • High-speed data transfer with 5 ms sampling interval
    • Suitable for PV inverter and multi-MPPT string efficiency testing
    • Direct measurement without differential probes for high voltages
    • Compliant with EN IEC 61010 safety standards

     

    Learn More
  • Hioki PQ3198 Analyzer - 01
    Hioki PQ3198 Analyzer - 04
    Quick View
    HIOKI E E CORPORATION Hioki PQ3198 Analyzer

    The Hioki PQ3198 Analyzer is a high-precision power quality analyzer designed to detect, log, and analyze electrical anomalies in single- to three-phase systems. Ideal for industrial equipment, EV chargers, and aviation systems, it ensures reliable troubleshooting and energy management.

    Key Features

    • IEC 61000-4-30 Ed.3 Class A compliant measurement
    • High-accuracy voltage (±0.1%), current (±0.1%), and power (±0.2%) recording
    • Detects voltage dips, swells, interruptions, frequency fluctuations, and inrush current
    • Harmonics and supraharmonics measurement up to 80 kHz
    • Transient voltage measurement up to 6000 V peak at 2 MS/s
    • Two-circuit measurement with efficiency calculation
    • GPS synchronization for multi-device setups (optional)
    • Intuitive PQ ONE software for analysis and report creation
    • Remote monitoring via GENNECT One and cloud-based services

     

    Learn More
  • Hioki VT1005 Divider - 01
    Hioki VT1005 Divider - 04
    Quick View
    HIOKI E E CORPORATION Hioki VT1005 Divider

    The Hioki VT1005 Divider allows safe, accurate measurement of high voltages up to 5000 V and evaluation of inverter efficiency with exceptional precision. Its broad frequency range, high noise immunity, and differential input design make it ideal for power system and high-voltage inverter applications.

    Key Features

    • Maximum input voltage: 5000 V AC/DC
    • Differential input method for precise measurement
    • ±0.08% DC accuracy, ±0.04% at 50/60 Hz, ±0.17% at 50 kHz
    • Frequency band: DC to 4 MHz (-3 dB)
    • Excellent amplitude flatness: ±0.1% up to 200 kHz
    • Phase flatness: ±0.1° up to 500 kHz
    • Noise resistance: CMRR 80 dB typical (100 kHz)
    • Detects efficiency improvements on the order of 0.1%
    • Safely measures high voltages that standard analyzers cannot handle

     

    Learn More
  • Hioki-PW4001-Analyzer-01
    Hioki-PW4001-Analyzer-04
    Quick View
    HIOKI E E CORPORATION Hioki-PW4001-Analyzer

    The Hioki PW4001 Analyzer is a portable, high-precision 4-channel power analyzer built for vehicle, motor, and inverter testing. It combines lab-grade measurement accuracy with field-ready portability, supporting high-frequency applications up to 600 kHz and real-world vehicle testing.

    Key Features

    • ±0.04% basic DC accuracy for precise measurements
    • Frequency bandwidth from DC to 600 kHz
    • Operates in harsh environments from -20°C to 50°C
    • Auto phase shift correction for Hioki current sensors
    • Direct CAN/CAN FD input and output for vehicle data acquisition
    • Compact, portable design for field or lab use
    • Motor and inverter efficiency evaluation with 1 ms data updates
    • Direct voltage input up to 1500 V DC
    • High-speed sampling at 2.5 MHz for waveform analysis

     

    Learn More
  • I-prober 520
    I-prober 520
    Quick View
    Aim-TTi I-prober 520 USD $ 851.11
    • Current measurement from insulated probing of conductor
    • Suitable for observation and measurement of current in PCB tracks, component leads and ground planes
    • Wide dynamic range of 10mA to 20A peak to peak
    • Wide bandwidth of DC to 5MHz
    • Low noise figure equivalent to <6mA rms at full B/W
    • Safety rated to 300V Cat II (600V Cat 1)
    • Suitable for connection to any oscilloscope
    • High accuracy general purpose H-field probe
    • Converts to ‘closed magnetic circuit’ current probe

     

    Add to cart
    Learn More

Showing 1–16 of 65 results