Products

The 3110A Standards Waveform Generator is a feature-rich, intuitive tool for engineers conducting EMC testing. From automotive to aviation applications, this unit simplifies the most complex test routines.

Key Features:

• 3,400+ Built-In Tests for automotive and industry standards
• Fast Rise Time: 3 µs full-scale with up to 1 MHz bandwidth
• Segment-Based Waveform Creation for custom sequences
• Free Lifetime Standards Updates
• Automated Triggering via GPIO or LAN
• Flexible Output Control including frequency, amplitude, and DC offset
• Extremely Precise Resolution: 0.01 Hz frequency, 76 µV amplitude
• Supports All Common Waveforms: Sine, square, triangle, DC, ripple, and more

The Tabor 5200 PXI Waveform Generator is a versatile single-channel PXI arbitrary waveform generator that combines precision, speed, and flexibility in a compact module. It supports sine waves up to 25MHz, square waves to 15MHz, and offers 14-bit vertical resolution with 1M waveform memory. Equipped with ArbConnection software, the 5200 allows fast waveform creation, editing, and sequencing, making it ideal for PXI-based test systems and advanced laboratory applications.

Key Features

• Single-channel arbitrary waveform generator with 50MS/s sample rate
• Sine output up to 25MHz, square up to 15MHz, SINE OUT to 50MHz
• 14-bit vertical resolution for high waveform fidelity
• 1M waveform memory with segmentable storage up to 4096 segments
• Supports AM, FM, Arbitrary FM, FSK, Ramped FSK, and Sweep modulation
• Sequence capability with up to 4096 segments and burst repetitions
• Ultra-fast waveform downloads using DMA
• ArbConnection software for waveform design, import, and editing
• Flexible triggering via PXI bus, front panel, or manual commands
• Multi-instrument synchronization for phase-controlled outputs
• Occupies a single PXI slot for compact system integration

The Tabor 5201 PXI Waveform Generator is a high-performance single-channel PXI arbitrary waveform generator, delivering precision, speed, and versatility in a compact PXI module. It produces sine waves up to 50MHz, square waves to 30MHz, and provides 14-bit resolution with 2M waveform memory. Combined with ArbConnection software, the 5201 enables rapid waveform creation, editing, sequencing, and multi-instrument synchronization, making it ideal for advanced laboratory and PXI-based testing applications.

Key Features

• Single-channel PXI arbitrary waveform generator with 125MS/s sample rate
• Sine output up to 50MHz, square waves to 30MHz, SINE OUT to 125MHz
• 14-bit vertical resolution for high waveform fidelity
• 2M waveform memory with segmentable storage for up to 4096 segments
• Supports AM, FM, Arbitrary FM, FSK, Ramped FSK, and Sweep modulation
• Sequence capability with up to 4096 waveform segments and burst repetitions
• Ultra-fast waveform downloads using DMA
• ArbConnection software for waveform design, editing, and import
• Flexible triggering via PXI bus, front panel, or manual commands
• Multi-instrument synchronization for phase-controlled outputs
• Occupies a single PXI slot for compact integration

The Tabor 5251 PXI Waveform Generator is a high-performance single-channel PXI waveform generator designed for versatile lab and PXI-based testing applications. With 250MS/s sample rate, 16-bit resolution, and 2M waveform memory, it produces precise sine waves up to 100MHz and square waves up to 62.5MHz. Combined with ArbConnection software, it offers fast waveform creation, sequencing, modulation, and multi-instrument synchronization, making it ideal for modern communication and research systems.

Key Features

• Single-channel PXI waveform generator with 250MS/s sample rate
• Sine waves up to 100MHz, square waves up to 62.5MHz
• 16-bit vertical resolution for high-fidelity output
• 2M waveform memory, segmentable for up to 4096 sequences
• Supports AM, FM, FSK, PSK, ASK, frequency & amplitude hopping, and sweep
• Multiple run modes: trigger, timer, and trigger delay
• Ultra-fast waveform downloads via DMA
• ArbConnection software for waveform design, import, and editing
• Multi-instrument synchronization for phase-controlled outputs
• Occupies a single PXI slot for compact system integration

The Data Logger LR8102 is a modular data acquisition system ideal for high-voltage and embedded applications. Designed for EV battery testing, PV inverter evaluation, and energy-efficient system analysis, it allows users to build the exact measurement system needed with flexible modules.

Key Features

• Modular design to expand channels as required
• Supports real-time high-speed data transfer (LR8102)
• Synchronize multiple loggers for large-scale measurements (LR8102)
• High-precision measurements for voltage, current, and temperature
• Ideal for battery charge/discharge testing and PV inverter production
• Compatible with power measurement modules (M7103) and voltage/temperature modules (M7100, M7102)

High-performance analyzer for compliance testing to EN61000-3-2 and EN61000-3-3 with real-time harmonic and waveform data display.

Key Features:

• Complies with EN61000-3-2 and EN61000-3-3 standards
• Measures rms/peak voltage & current, power, PF, phase
• Histogram display for 40 harmonics
• Voltage & current waveform visualization
• Real-time graphical updates for live analysis
• High-contrast 320 x 240 pixel LCD
• USB, RS232, and printer interfaces
• HA-PC-Link+ software included for full PC control
• Available with UK, Schuko, or US sockets

The Hioki M7103 Module is a compact, high-precision power measurement solution designed for multi-channel efficiency testing of PV inverters, high-voltage batteries, and energy storage systems. Ideal for embedded and production line applications, it offers unmatched scalability, speed, and accuracy.

Key Features

• Power analyzer-class accuracy: DC/AC ±0.07%
• Supports up to 1500 V DC measurement
• 12 channels per 4U rack unit; expandable to 120 channels
• Synchronization Source Sharing for stable efficiency measurements
• High-speed data transfer with 5 ms sampling interval
• Suitable for PV inverter and multi-MPPT string efficiency testing
• Direct measurement without differential probes for high voltages
• Compliant with EN IEC 61010 safety standards

The Hioki PQ3198 Analyzer is a high-precision power quality analyzer designed to detect, log, and analyze electrical anomalies in single- to three-phase systems. Ideal for industrial equipment, EV chargers, and aviation systems, it ensures reliable troubleshooting and energy management.

Key Features

• IEC 61000-4-30 Ed.3 Class A compliant measurement
• High-accuracy voltage (±0.1%), current (±0.1%), and power (±0.2%) recording
• Detects voltage dips, swells, interruptions, frequency fluctuations, and inrush current
• Harmonics and supraharmonics measurement up to 80 kHz
• Transient voltage measurement up to 6000 V peak at 2 MS/s
• Two-circuit measurement with efficiency calculation
• GPS synchronization for multi-device setups (optional)
• Intuitive PQ ONE software for analysis and report creation
• Remote monitoring via GENNECT One and cloud-based services

The Hioki VT1005 Divider allows safe, accurate measurement of high voltages up to 5000 V and evaluation of inverter efficiency with exceptional precision. Its broad frequency range, high noise immunity, and differential input design make it ideal for power system and high-voltage inverter applications.

Key Features

• Maximum input voltage: 5000 V AC/DC
• Differential input method for precise measurement
• ±0.08% DC accuracy, ±0.04% at 50/60 Hz, ±0.17% at 50 kHz
• Frequency band: DC to 4 MHz (-3 dB)
• Excellent amplitude flatness: ±0.1% up to 200 kHz
• Phase flatness: ±0.1° up to 500 kHz
• Noise resistance: CMRR 80 dB typical (100 kHz)
• Detects efficiency improvements on the order of 0.1%
• Safely measures high voltages that standard analyzers cannot handle

The Hioki PW4001 Analyzer is a portable, high-precision 4-channel power analyzer built for vehicle, motor, and inverter testing. It combines lab-grade measurement accuracy with field-ready portability, supporting high-frequency applications up to 600 kHz and real-world vehicle testing.

Key Features

• ±0.04% basic DC accuracy for precise measurements
• Frequency bandwidth from DC to 600 kHz
• Operates in harsh environments from -20°C to 50°C
• Auto phase shift correction for Hioki current sensors
• Direct CAN/CAN FD input and output for vehicle data acquisition
• Compact, portable design for field or lab use
• Motor and inverter efficiency evaluation with 1 ms data updates
• Direct voltage input up to 1500 V DC
• High-speed sampling at 2.5 MHz for waveform analysis

The Hioki IM7583 Impedance Analyzer is a high-speed, reliable LCR measurement device ideal for testing electronic components in high-volume production environments. It combines precision, compact design, and flexible operation for a wide range of applications.

Key Features

• Test frequency range: 1 MHz to 600 MHz
• Fastest analog test speed: 0.5 milliseconds
• Basic accuracy: ±0.65% rdg.
• Half-rack body with palm-sized test head for flexible placement
• RF I-V method for accurate impedance measurement
• Contact check with DCR testing, Hi-Z reject, or waveform judgment
• Frequency sweeps, level sweeps, and time interval measurements in Analyzer Mode
• Comparator function for automated PASS/FAIL judgments

The Hioki IM7585 Impedance Analyzer is a high-speed, high-precision LCR and impedance measurement device designed for R&D and production environments. It delivers fast, accurate testing of electronic components from 1 MHz to 1.3 GHz.

Key Features

• Test frequency range: 1 MHz to 1.3 GHz
• Fastest test speed: 0.5 milliseconds (analog measurement)
• Exceptional stability with 0.07% measured value variability at 1 GHz
• Basic accuracy: ±0.65% rdg.
• Half-rack body with a palm-sized test head for flexible placement
• RF I-V method for precise impedance analysis
• Contact check with DCR testing, Hi-Z reject, or waveform judgment
• Frequency sweeps, level sweeps, and time interval measurements in Analyzer Mode
• Comparator function for PASS/FAIL judgments

The Hioki IM9201 SMD Test Fixture is a high frequency test fixture designed exclusively for the IM7580 series impedance analyzers. Supporting six common SMD package sizes, it enables stable, repeatable impedance measurements up to 3 GHz for advanced component evaluation in R&D and production environments.

Key Features

• Designed exclusively for Hioki IM7580 series impedance analyzers
• Supports impedance measurement up to 3 GHz
• Accommodates six SMD package sizes in one fixture
• Dual device guides allow fast and accurate component placement
• Optimized for high frequency stability and repeatability
• Ideal for RF components, ferrite beads, and chip inductors

A high-speed, high-precision LCR meter ideal for low-ESR and impedance testing in advanced electronic components like polymer capacitors, inductors, and piezoelectric elements.

Key Features:

• Continuous LCR/DCR/sweep measurements with one instrument
• Ultra-fast testing speeds: 1.5 ms (1 kHz), 0.5 ms (100 kHz)
• High accuracy: ±0.08% basic accuracy for Z parameter
• Ideal for low-ESR measurement of functional polymer capacitors
• Suitable for resonance testing of piezoelectric elements
• Accurate DCR and L-Q testing of inductors, coils, and transformers

The Hioki IM7580A is a compact, high-speed impedance analyzer for 1 MHz to 300 MHz testing, ideal for both production and R&D. It works seamlessly with the IM9201 SMD fixture for reliable component testing.

Key Features:

• 1 MHz to 300 MHz frequency range
• 0.5 ms test speed
• ±0.72% basic accuracy
• Compact half-rack size with palm-sized test head
• Reliable contact check functions
• Frequency, level, and time sweeps in Analyzer Mode
• RF I-V method for precise measurement

The Hioki IM7581 is a compact, high-speed impedance analyzer designed for accurate testing from 100 kHz to 300 MHz. It’s ideal for both production and development environments.

Key Features:

• 100 kHz to 300 MHz frequency range
• 0.5 ms fastest test speed
• ±0.72% basic accuracy
• Compact half-rack size, palm-sized test head
• Reliable contact check via DCR, Hi-Z reject, or waveform judgment
• Supports frequency, level, and time sweeps in Analyzer Mode
• Uses RF I-V method for precise measurement