Products

The BatReg² Battery Cycler is a high-precision bidirectional and regenerative battery testing system designed for advanced battery research, cycling, and charging applications. Built with state-of-the-art digital control and regenerative technology, it enables accurate testing while efficiently returning excess energy to the grid. With output ratings up to 100 V and ±150 A, this system delivers reliable performance for laboratories, research centers, and battery development facilities.

Key Features

• High-precision bidirectional and regenerative battery cycler
• Output capability up to 100 V and ±150 A
• Multiple regulation modes including Constant Voltage, Constant Current, and Constant Power
• 24-bit resolution at 100 kHz for precise output setting and readback
• Built-in polarity detection for safe battery connection
• Embedded web server interface for monitoring and configuration
• Integrated 24-bit Arbitrary Waveform Generator running at 100 kHz
• 4-channel precision oscilloscope for advanced signal monitoring
• High efficiency regenerative design that returns energy to the grid
• Low output noise and ripple due to high switching frequency architecture
• Ethernet connectivity supporting TCP/IP and UDP communication
• Optional trigger, analog control, auxiliary ADC, and K-type thermocouple inputs

The BT3554-50 Battery Tester streamlines the inspection of UPS and lead-acid batteries by providing fast, accurate measurement of internal resistance and voltage without taking the battery offline. Designed for field use, it combines precision, noise reduction technology, and smart wireless connectivity for efficient diagnostics and data management.

Key Features

• Measure internal resistance and voltage in just 2 seconds
• Diagnose battery condition (PASS, WARNING, FAIL) instantly
• Perform measurements while battery is online
• Noise-resistant technology ensures reliable readings
• Screen and audio guidance for simplified measurement
• Save and manage data via smartphone, tablet, or Excel® using GENNECT Cross (Z3210 adapter required)
• New ergonomic leads (L2020 Pin Type) for easy access to battery terminals
• Optional wall and shoulder straps for hands-free operation

The BT4560-50 Battery Impedance Meter provides accurate Electrochemical Impedance Spectroscopy (EIS) measurements for high-capacity batteries in EVs and ESSs. Designed for R&D and manufacturing, it simplifies the testing of internal battery resistance, charge transfer, and electrode behavior, while enabling multi-battery evaluation systems.

Key Features

• EIS measurement frequency: 0.01 Hz to 1.05 kHz
• Simultaneous impedance, voltage, and temperature measurement
• Dedicated evaluation software for R&D analysis
• Compatible with third-party equivalent circuit analysis
• LAN interface for production line integration and multi-channel testing
• Measures very low impedances: 1 mΩ or less
• Four-terminal pair probes reduce noise and ensure stable readings

The BT4560-60 Battery Impedance Meter delivers reliable Electrochemical Impedance Spectroscopy (EIS) measurements for EVs, energy storage systems, and high-capacity battery R&D and production. Engineered for precision and efficiency, it enables quick assessment of battery cell health, internal resistance, and electrode performance.

Key Features

• EIS measurement frequency: 0.01 Hz to 10 kHz
• Simultaneous impedance, voltage, and temperature measurement
• Dedicated software for R&D evaluation
• Compatible with third-party equivalent circuit analysis
• Scalable multi-battery testing via SW1001/SW1002 Switch Mainframes
• Measures very low impedances: 1 mΩ or less
• Four-terminal pair measurement for stable, noise-resistant readings

Teledyne Test Tools Digital Power Meters provide reliable, high-precision AC and DC power measurements in a compact design. Ideal for R&D, QA, and compliance testing.

Key Features:

• Bandwidth: DC, 0.1 Hz to 100 kHz
• High-resolution 4″ and 5″ TFT LCD displays
• 19 power measurement parameters
• 16-bit ADC and 300 kHz sampling rate (T3PM1100)
• Waveform, harmonic, and integration functions
• External current sensor input (T3PM1100)
• Supports IEC 62301 and IEC 61000-4-7 standards
• Interfaces: USB, LAN, RS-232C
• Front/rear terminal inputs for flexible testing

The FAST-Bi-1K5 Power Supply is a high precision bipolar, bidirectional and regenerative digital power supply designed for demanding testing environments. Built in a compact 19 inch 2U form factor, it supports four quadrant operation and provides output ratings up to ±100 V and ±150 A. With advanced digital control, embedded monitoring tools and energy regenerative architecture, this power supply offers an efficient solution for battery testing, EV systems, fuel cells and laboratory research applications.

Key Features

• 1.5 kW bipolar bidirectional regenerative power supply
• Four quadrant operation across the voltage current plane
• Output ratings up to ±100 V and ±150 A
• Multiple regulation modes including CV, CC, CP and CR
• High precision 24 bit resolution at 100 kHz sampling rate
• Built in Arbitrary Waveform Generator operating at 100 kHz
• Integrated 4 channel oscilloscope for signal monitoring
• Embedded web server interface for remote control and configuration
• Gigabit Ethernet connectivity with TCP IP and UDP communication
• Energy regenerative architecture returning excess power to the grid
• Low noise and ripple due to high switching frequency design
• Parallel operation of up to four units for increased power capability

The FAST-PS Power Supply is a high performance bipolar digital power supply series designed for fast and precise current and voltage control. With power ratings up to 600 W, this advanced unit combines digital control technology with built in waveform generation, signal monitoring and flexible communication interfaces. The integrated web server and powerful control architecture make the FAST-PS Power Supply an ideal solution for laboratories, research facilities and demanding industrial applications.

Key Features

• High performance bipolar digital power supply with power ratings up to 600 W
• Precise current and voltage control modes for flexible operation
• Built in Arbitrary Waveform Generator operating at 100 kHz
• Integrated four channel oscilloscope with advanced triggering features
• Embedded Linux operating system with web based user interface
• High speed Ethernet connectivity with 10/100/1000 Mbit communication
• Dual SFP or SFP+ communication slots for fast feedback control
• Digital control loop for precise response and load adaptation
• Local display and interface for monitoring voltage and current
• Integrated protection including over voltage, over current and over temperature
• Optional analog control input for amplifier compatibility

Key Features

• Fully integrated battery test system with cycler, chamber, and controls
• Pre-configured AES chambers and MACCOR cyclers for turnkey operation
• No integration required, ready for immediate deployment
• Supports R&D, cycle life, performance validation, and abuse testing
• Wide current range from microamp-level to 3,200 A total system capacity
• Channel scalability from 1 to 192 channels for flexible testing needs
• Compatible with cylindrical, pouch, prismatic cells, modules, and packs
• Energy-efficient regenerative testing with up to 90% energy recovery
• Temperature control range from -20 °C to +80 °C with automotive options
• Unified software, safety systems, and pre-wired setup included

Key Features:

• Fully automated battery testing for large packs up to 300 V
• Simultaneous measurement of internal resistance (AC-IR) and open-circuit voltage (OCV)
• Wide resistance range: 3 mΩ to 3.1 kΩ with 0.1 μΩ resolution
• Voltage measurement ranges: 6 V, 60 V, and 300 V with high precision
• Equipped with LAN interface for production line integration
• Fast, accurate AC four-terminal method
• Resistant to static electricity (±30 kV contact discharge)
• Ideal for high-voltage pack inspection and quality control

Key Features:

• Fully automated battery testing for small cells and packs up to 60 V
• Simultaneous measurement of internal resistance (AC-IR) and open-circuit voltage (OCV)
• Wide resistance range: 0 Ω to 3.1 kΩ with 1 μΩ resolution
• Voltage measurement ranges: 6 V and 60 V with high precision
• Equipped with LAN interface for integration with production lines
• Rapid measurement using AC four-terminal method
• Highly resistant to static electricity (±30 kV contact discharge)

Key Features:

• Fully automated battery testing for large cells and mid-sized packs up to 100 V
• Simultaneous measurement of internal resistance (AC-IR) and open-circuit voltage (OCV)
• Wide resistance range: 3 mΩ to 3.1 kΩ with 0.1 μΩ resolution
• Voltage measurement ranges: 6 V, 60 V, and 100 V with high precision
• Equipped with LAN interface for production line integration
• Fast, accurate AC four-terminal method
• Resistant to static electricity (±30 kV contact discharge)
• Ideal for production, shipping inspection, and quality control

The Hioki M7103 Module is a compact, high-precision power measurement solution designed for multi-channel efficiency testing of PV inverters, high-voltage batteries, and energy storage systems. Ideal for embedded and production line applications, it offers unmatched scalability, speed, and accuracy.

Key Features

• Power analyzer-class accuracy: DC/AC ±0.07%
• Supports up to 1500 V DC measurement
• 12 channels per 4U rack unit; expandable to 120 channels
• Synchronization Source Sharing for stable efficiency measurements
• High-speed data transfer with 5 ms sampling interval
• Suitable for PV inverter and multi-MPPT string efficiency testing
• Direct measurement without differential probes for high voltages
• Compliant with EN IEC 61010 safety standards

Key Features:

• Industry-leading precision for OCV and AC-IR testing of EV battery cells
• Ultra-high resolution for advanced cell grading (down to 0.01 µΩ)
• Fast testing speeds with excellent reproducibility
• MIR mode enables parallel testing without interference
• Channel-specific correction and multiplexer support
• Reliable long-term system operation with route resistance monitoring
• Easy integration with existing systems (BT3562A command compatibility)
• Compact, lightweight design for lab or production lines

The Hioki PW3335 Meter is a high-precision single-phase power meter designed to measure AC/DC standby power and large power loads with exceptional accuracy. Ideal for energy testing of transformers, adapters, power supplies, and motors, it supports currents up to 30 A continuous and handles high crest factors for accurate low-power measurements.

Key Features

• Measures AC/DC power from 1 mA to 20 A (max 30 A continuous)
• High-precision basic accuracy: ±0.1%
• Wide frequency bandwidth: DC to 100 kHz
• Measures harmonic and standby power per IEC62301
• Accurate even at low power factors for no-load testing
• Supports crest factor up to CF6 for high-accuracy AC adapter testing
• Multi-unit synchronization: up to 8 meters
• Optional external sensor inputs up to 5000 A (PW3335-03/-04)
• Built-in LAN, RS-232C, GP-IB, and D/A outputs depending on model

The Hioki PW3336 Meter is a high-precision, 2-channel power meter for DC, single-phase, and three-phase measurements. It delivers accurate readings for motors, inverters, power conditioners, and industrial power supplies, supporting voltages up to 1000 V and currents up to 65 A direct input.

Key Features

• Measures DC, single-phase 2-wire, single-phase 3-wire, and 3-phase 3-wire systems
• High-precision basic accuracy: ±0.1%
• Frequency bandwidth: DC to 100 kHz
• Supports currents up to 65 A direct input, up to 5000 A with optional sensors
• Harmonic analysis up to the 50th order (IEC 61000-4-7)
• Multi-unit synchronization: up to 8 units
• Built-in GP-IB or D/A output options available
• Ideal for motor, inverter, power conditioner, and industrial equipment testing

The Hioki PW3337 Meter is a high-precision, 3-channel power meter for DC, single-phase, and three-phase 4-wire systems. It is ideal for motors, inverters, power conditioners, and industrial power supplies, supporting voltages up to 1000 V and currents up to 65 A direct input.

Key Features

• Measures DC, single-phase 2-wire to 3-phase 4-wire systems
• High-precision basic accuracy: ±0.1%
• Frequency bandwidth: DC to 100 kHz
• Supports currents up to 65 A direct input, up to 5000 A with optional sensors
• Harmonic analysis up to the 50th order (IEC 61000-4-7)
• Multi-unit synchronization: up to 8 units
• Can create a 6-channel setup by synchronizing two units via PC application
• Built-in GP-IB or D/A output options available
• Ideal for development and production of motors, inverters, and power conditioners