Showing 1–16 of 38 results


  • The Hioki 3269 Power Supply is a four-channel unit designed to provide stable power to Hioki flat bandwidth AC/DC current probes, including the 3273-50 to 3276 series, CT6700, and CT610 series. It enables accurate current measurement output for Memory HiCorders, oscilloscopes, and other data acquisition instruments.

    Key Features

    • Supplies power to Hioki current probes 3273-50 to 3276, CT6700, CT610 series
    • Four-channel power output for multi-probe setups
    • Compatible with Memory HiCorders and oscilloscopes
    • Output voltage: ±12 V ±0.5 V, maximum 2.5 A (total of all channels)
    • Compact and lightweight design: 80 × 119 × 200 mm, 1.1 kg
    • Wide AC input range: 100–240 V AC, 50/60 Hz, 170 VA max
    • Simple integration into data acquisition setups
    • Note: Requires compatible current sensor to operate

  • The EASY-DRIVER Power Supply is a compact digital bipolar power supply series designed for precise current control and flexible integration in laboratory and industrial environments. Delivering up to 200 W output power, this highly configurable unit combines advanced digital control with reliable Ethernet connectivity for seamless monitoring and operation. With multiple output configurations and low noise performance, the EASY-DRIVER Power Supply provides a cost effective and high performance solution for powering sensitive electronic loads.

    Key Features

    • Compact bipolar digital power supply with output power up to 200 W
    • Multiple output ratings including ±1 A at ±12 V, ±2 A at ±20 V, ±5 A at ±20 V and ±10 A at ±20 V
    • Digital current control loop for precise and stable operation
    • Low noise and high bandwidth output performance
    • Ethernet connectivity with TCP IP and UDP communication
    • Multi DSP architecture for reliable digital signal processing
    • Local display for output current and voltage monitoring
    • LED indicators for real time system status
    • Built in protections including over voltage and over temperature
    • External interlock signal and inductive load discharge circuitry
    • Compatible with laboratory equipment and standalone installations

     

  • The FAST-PS-1K5 Power Supply is a high performance bipolar digital power supply designed for demanding laboratory, industrial and research applications. Delivering up to 1.5 kW of output power, this advanced system provides precise current and voltage control along with integrated monitoring tools and flexible communication interfaces. With digital control architecture, built in web server functionality and high stability sensing technology, the FAST-PS-1K5 Power Supply offers a reliable solution for battery testing, superconducting magnet systems and advanced power electronics applications.

    Key Features

    • High performance bipolar digital power supply with power ratings up to 1.5 kW
    • Accurate current and voltage control for precision power applications
    • Output models available up to 100 A and 100 V
    • Digital control loop for flexible configuration and load adaptation
    • Integrated web server for monitoring and system configuration
    • Built in waveform generation and triggering capabilities
    • Four channel oscilloscope monitoring at 100 ksps
    • High precision current sensing using 0 FLUCS DCCT technology
    • Gigabit Ethernet connectivity with additional SFP communication slots
    • Optional four quadrant operation with dedicated external crate
    • Quench protection support for superconducting magnet systems
    • Local display and interface for monitoring voltage and current

     

  • The FAST-PS-M Power Supply is a high performance monopolar digital power supply designed for applications that require stable current and voltage control. With output power up to 900 W, this advanced power system integrates a digital control loop, embedded web server and built in waveform and monitoring tools. Its high precision sensing technology and fast communication interfaces make the FAST-PS-M Power Supply an ideal solution for research laboratories, industrial test systems and precision electronics applications.

    Key Features

    • High performance monopolar digital power supply with output power up to 900 W
    • Precise current and voltage control with digital regulation
    • Built in Arbitrary Waveform Generator operating at 100 ksps
    • Integrated four channel oscilloscope with high precision monitoring
    • Embedded web server interface for configuration and control
    • High speed Ethernet connectivity with 10/100/1000 Mbit support
    • Dual SFP communication slots for fast feedback and system integration
    • Low noise output and high bandwidth performance
    • High precision sensing using 0 FLUCS current transducer technology
    • Local colour display and interface for monitoring and configuration
    • Internal protections including over voltage and over current protection
    • Optional analog control input for amplifier compatibility

     

  • The Hioki MR6000 Memory HiCorder sets a new benchmark in waveform recording, combining cutting-edge technology, intuitive design, and world-class performance. Built from the ground up, it’s engineered to tackle both current and future measurement challenges with ease and precision.

    Key Features:

    • Large, intuitive touch panel for efficient and user-friendly operation
    • Simultaneous multi-channel isolation measurement at up to 200 MS/s (with High Speed Analog Unit U8976)
    • Significantly faster data saving for a seamless experience
    • Real-time data saving without interrupting ongoing measurements
  • The Hioki Rack-mounted Multi-channel System Recorder (MR8741/MR8740) is a powerful, high-speed, single-device solution for waveform recording and generation. Ideal for test systems, it offers high-resolution, isolated multi-channel measurements with fast sampling capabilities.

    Key Features:

    • Integrated waveform recording and generation in one device
    • Equipped with DVM Unit MR8990 for high-accuracy 24-bit resolution measurements
    • Supports up to 16 channels (MR8741) for multi-channel testing
    • Isolated input between channels and from input to chassis (up to 300 V AC/DC)
    • High-speed sampling up to 20 MS/s
    • Compact rack-mountable design (4U height, under 180 mm depth)
    • Monitor display and setting access via DVI-D and mouse
    • Enables remote measurement and control via LAN
    • Browser-based screen monitoring or advanced control via Hioki 9333 LAN Communicator
  • The Hioki Memory Recorder is a high-speed, fully-isolated data acquisition system designed for precise and simultaneous measurement of multiple analog and logic signals. Ideal for testing, simulation, and system diagnostics, it combines waveform generation and recording in one powerful unit.

    Key Features:

    • Generate and record waveforms using a single device
    • Simulate issues by outputting previously recorded problematic waveforms to test devices
    • Supports 32 analog + 32 logic channels, expandable to 28 analog + 64 logic channels
    • High-speed sampling up to 20 MS/s with fully isolated inputs
    • Ensures safe measurement with complete analog input isolation
    • Equipped with a large-capacity 512M-word memory
    • Simultaneously measures high voltage and ultra-low voltage system signals

     

  • The Memory HiCorder MR8848 is a rugged, high-speed data acquisition recorder designed for capturing critical transient events in demanding industrial and infrastructure environments.

    Key Features

    • Durable, shock-resistant portable design for field use
    • Isolated analog channels for safe multi-system measurements
    • 32 analog and 64 logic channels for complex signal analysis
    • High-speed sampling to capture fast transient waveforms
    • Large-capacity memory for long-duration recording
    • Built-in waveform and numerical analysis for pass or fail judgments
    • Optional on-site printer for secure, tamper-proof documentation

     

  • The Memory HiCorder MR8870 is a compact, high-speed data acquisition recorder designed for waveform observation and RMS variation recording in maintenance and fault analysis applications.

    Key Features

    • Dual recording mode for instantaneous waveforms and RMS variations
    • Two isolated analog channels with 2 MW internal memory
    • Real-time saving of measured values to CF card
    • Synchronize two instruments to record four channels at once
    • High-speed performance up to 1 MS per second
    • Compact handheld design for easy field transport
    • Sharp QVGA TFT wide LCD for clear waveform viewing
    • Ideal for elevator, motor, inverter, and machine diagnostics

     

  • The Memory HiCorder MR8875 is a high-speed, portable data acquisition recorder designed for vehicle testing, performance evaluation, and advanced multichannel measurements.

    Key Features

    • 1000 V direct input with instantaneous DC and RMS measurement
    • Up to 16 to 60 channels with plug-and-play input modules
    • High-speed simultaneous logging down to 2 microseconds
    • Real-time recording directly to SD card for long-term logging
    • 16-bit high-resolution measurement for accurate results
    • Direct CAN bus input for onboard vehicle analysis
    • Built-in FFT and waveform calculation for advanced analysis
    • Intuitive touch screen interface for fast setup and operation
    • Designed to withstand vibration and extreme temperatures

     

  • The Memory HiCorder MR8880 is a rugged, field-ready waveform recorder designed to capture high- and low-voltage signals safely in industrial and maintenance applications.

    Key Features

    • Direct 600 V input for three-phase power measurements
    • CAT III 600 V isolation for safe high-voltage testing
    • Four completely isolated analog channels
    • Simultaneous recording of three-phase systems plus one spare channel
    • Wide operating temperature range from minus 10 to 50 degrees Celsius
    • Shock- and vibration-resistant housing with side protectors
    • Built-in trigger and pre-trigger functions for precise event capture
    • Presets function for fast and consistent setup

     

  • The NGPS Power Supply is a high stability digital power supply series designed for demanding industrial and scientific applications. Delivering up to 10 kW of output power and scalable up to 40 kW through parallel operation, this advanced system provides precise current and voltage control with exceptional temperature stability. Equipped with Gigabit Ethernet connectivity, an embedded web server, waveform generation capability and a built in oscilloscope, the NGPS Power Supply offers a powerful and flexible solution for laboratories, research facilities and high performance power systems.

    Key Features

    • High stability digital power supply with output power up to 10 kW
    • Parallel operation capability allowing up to 40 kW system power
    • Precise current and voltage control using advanced digital architecture
    • Temperature stabilized internal section for extremely low drift
    • High speed 10/100/1000 Mbit Ethernet communication
    • Ultra fast SFP interface supporting update rates up to 100 kHz
    • Embedded Linux operating system with web based configuration interface
    • Built in Arbitrary Waveform Generation for custom signal control
    • Integrated four channel oscilloscope for real time monitoring
    • Remote sensing terminals for accurate voltage control at the load
    • Optional analog control input for compatibility with legacy systems
    • Low noise and high efficiency performance for demanding applications

     

  • The Polarity Inverters series provides a reliable solution for switching the output polarity of high power converters. Designed to work seamlessly with monopolar power supplies such as NGPS systems, these polarity switching units support current ratings up to 1000 A and voltage up to 250 V. With integrated safety interlocks and enabling signals, the system ensures secure polarity inversion for demanding industrial and scientific applications.

    Key Features

    • Reliable polarity switching for power converters up to 1000 A
    • Maximum voltage rating of 250 V for high power applications
    • Compatible with monopolar power supplies including NGPS systems
    • Available in multiple current ratings including 200 A, 420 A, 630 A and 1000 A
    • Auxiliary AC power input from 100 to 240 VAC at 50 or 60 Hz
    • Integrated interlock and enabling signals for safe switching operations
    • Supports control signals up to 240 V at 16 A and 10 A
    • Designed for applications requiring polarity reversal such as magnet degaussing
    • Standard rack mounting design with 19 inch enclosure options
    • Durable industrial construction for reliable long term operation

     

  • The PS1112S Power Supply is a compact low noise power supply designed to deliver stable 12 V output for sensitive measurement and instrumentation systems. Built with a mixed switching linear architecture, this high efficiency unit ensures extremely low ripple and noise levels that help maintain measurement accuracy. With a maximum output power of 14 W and a robust stainless steel enclosure, the PS1112S Power Supply is an ideal solution for powering precision electronic devices and scientific instruments.

    Key Features

    • Low noise fixed voltage power supply with stable 12 V output
    • Maximum output power of 14 W for precision electronic systems
    • Maximum output current of 1.2 A depending on input conditions
    • Mixed switching linear power architecture for low noise performance
    • Extremely low ripple and noise in the DC to 1 MHz frequency range
    • Compact and durable stainless steel enclosure
    • Designed for accurate measurement and instrumentation systems
    • High efficiency design while maintaining low noise operation
    • Suitable for powering electrometers and precision measurement devices
    • Optimized for laboratory and research equipment applications

     

  • The PS1215 Power Supply is a compact, high-precision dual-voltage power supply delivering ±15 V output for sensitive instrumentation. Engineered with a mixed switching-linear design, it ensures ultra-low noise performance for high-accuracy devices, particularly the 0-FLUCS current transducer series. Housed in a robust stainless steel enclosure, it provides 27 W of clean power while minimizing cable-related noise pickup, making it ideal for laboratory and research applications.

    Key Features

    • Dual-voltage output: ±15 V for precision instruments
    • Maximum output power: 27 W with AC derating
    • Ultra-low noise: 0.001 % for clean DC operation
    • Mixed switching-linear design for efficiency and low ripple
    • Compact and durable stainless steel enclosure
    • Compatible with 0-FLUCS DC Current Transducer series
    • Two cable options for voltage-output or current-output transducers
    • Ideal for high-precision DCCT measurements
    • Reduces cable length noise pickup for sensitive setups
    • Optimized for laboratory and high-accuracy instrumentation

     

  • The Pulse Generator MR8791 is a plug-and-play input module for Hioki Memory HiCorders, designed for precise control simulation testing of electronic control systems.

    Key Features

    • Outputs pulse and pattern waveforms on up to eight channels
    • Supports TTL level and open-collector output signals
    • Designed for control simulation testing of ECUs and control boards
    • Suitable for engine, airbag, brake, and power steering systems
    • Wide frequency range for pulse and logic pattern generation
    • Built-in self-test function for reliable operation
    • Isolated design between unit and output channels
    • Compact form factor for laboratory and test bench integration

     


Showing 1–16 of 38 results